Blackmagic Forum


https://forum.blackmagicdesign.com/

Get camera parameters like ISO from Micro Studio Camera 4K

https://forum.blackmagicdesign.com/viewtopic.php?f=12&t=100012

Page 1 of 1

Get camera parameters like ISO from Micro Studio Camera 4K

PostPosted: Thu Oct 03, 2019 12:26 pm
by Krzysztof_Rataj
Hello All,

we bought Micro Studio Camera 4K. We would like to make our own application to control this camera. We have problems how to gather information about actual camera settings like ISO, white balance, shutter speed etc. Is there a possibility to get this information from any other interface but not HDMI.
Thank you in advance for your help.

Re: Get camera parameters like ISO from Micro Studio Camera

PostPosted: Fri Oct 04, 2019 3:31 am
by Ian Morrish
No data comes out the SDI, HDMI or serial interface that lets you read any camera settings. You can only set values via the return SDI using ATEM software control (and ATEM API), the Arduino Shield, Decklink card API or custom hardware solution.

Re: Get camera parameters like ISO from Micro Studio Camera

PostPosted: Tue Oct 15, 2019 2:40 pm
by TON14_RUS
Ian Morrish wrote:No data comes out the SDI, HDMI or serial interface that lets you read any camera settings. You can only set values via the return SDI using ATEM software control (and ATEM API), the Arduino Shield, Decklink card API or custom hardware solution.


No way to get data from the camera?At all?