ATEM control from C# application

Ask software engineering and SDK questions for developers working on Mac OS X, Windows or Linux.
  • Author
  • Message
Offline

DeddyII

  • Posts: 10
  • Joined: Wed Mar 13, 2019 11:31 am
  • Real Name: Asko Krimann

ATEM control from C# application

PostFri Aug 02, 2019 12:10 pm

Hello,

Is there any document available where all possible commands that user can send to ATEM are written out?

I'm trying to write simple C# application that connects with ATEM Production Studio 4K over network and then send commands there. I'm interested if it's possible to send Record/Stop commands to cameras via ATEM?

Maybe someone knows it by heart so I don't have to try something that is impossible?
Offline
User avatar

Xtreemtec

  • Posts: 3935
  • Joined: Wed Jan 02, 2013 11:48 am
  • Location: The Netherlands

Re: ATEM control from C# application

PostSat Aug 03, 2019 9:44 am

Start stop commands are not free available in the Atem SDK as far as i know.

There is a start stop for the SDI protocol. So you might rather go around the Atem and pick up an Arduino SDI shield and send the record command to the cameras in the return SDI channel.
Daniel Wittenaar .:: Xtreemtec Media Productions ::. -= www.xtreemtec.nl =-
4K OBV Trailer, ATEM TVS HD, 4M/E Broadcast Studio 4K, Constelation 8K, Hyperdeck Studio 12G, Ursa Broadcast 4K, 4K fiber converters with Sony Control
Offline

DeddyII

  • Posts: 10
  • Joined: Wed Mar 13, 2019 11:31 am
  • Real Name: Asko Krimann

Re: ATEM control from C# application

PostMon Aug 05, 2019 6:39 am

Xtreemtec wrote:Start stop commands are not free available in the Atem SDK as far as i know.


What you mean by free?

But thanks, that Arduino SDI idea is something to go for.
Offline
User avatar

Xtreemtec

  • Posts: 3935
  • Joined: Wed Jan 02, 2013 11:48 am
  • Location: The Netherlands

Re: ATEM control from C# application

PostMon Aug 05, 2019 9:48 am

Free as in they are not anywere documented, as these functions are normally not controlled from the Atem. ;)
Daniel Wittenaar .:: Xtreemtec Media Productions ::. -= www.xtreemtec.nl =-
4K OBV Trailer, ATEM TVS HD, 4M/E Broadcast Studio 4K, Constelation 8K, Hyperdeck Studio 12G, Ursa Broadcast 4K, 4K fiber converters with Sony Control
Offline

DeddyII

  • Posts: 10
  • Joined: Wed Mar 13, 2019 11:31 am
  • Real Name: Asko Krimann

Re: ATEM control from C# application

PostMon Aug 05, 2019 11:56 am

Thanks a lot!

Return to Software Developers

Who is online

Users browsing this forum: No registered users and 7 guests