DeckLink IP/SDI HD functionality

Getting started with a Blackmagic product? Ask questions here about setup and installation.
  • Author
  • Message
Offline

ginodc

  • Posts: 2
  • Joined: Fri May 05, 2023 6:32 am
  • Real Name: Gino De ****

DeckLink IP/SDI HD functionality

PostWed Feb 07, 2024 8:23 am

Hi,

I have some questions regarding the new DeckLink IP/SDI HD card.
- Is this a full-duplex card? Can it play back and record at the same time?
- If you have an output via SMPTE2110 can this output be visible (in sync) on the SDI out?

Thx
Offline

Gary Adams

Blackmagic Design

  • Posts: 1395
  • Joined: Sat Aug 25, 2012 6:14 am

Re: DeckLink IP/SDI HD functionality

PostThu Feb 08, 2024 5:56 pm

This card appears as two Decklink cards, so it is possible to capture on one and playback on the other. The inputs to each device are either SDI or Ethernet as configured by Desktop video. Both the SDI and Ethernet for the respective device will be the same. The stream will have a slight delay determined by the receiving device. I hope this helps.

Gary
Gary Adams
Blackmagic Design

Return to Getting Started

Who is online

Users browsing this forum: acusta and 34 guests