- Posts: 2
- Joined: Wed Oct 24, 2012 4:53 pm
Hi,
I have:
Black Magic Intensity Shuttle USB 3.0 Serial 1088366
All I get is a black screen when I try to add a composite source to the composite video in.
I have checked the composite video with another capture device and it shows fine in there. It works fine with an EasyCap if you set it to "PAL B". The Source is a GH2 lumix camera's composite out.
I have tried the HDMI in fed from the same camera I think it is 1080p 25p. Same thing black screen. StarTech HDMI to ExpressCard HD Video Capture Card Adaptor 1080p picks it up fine.
The machine is a Dell M6600 with Windows 7 64bit sp1 i7 2920xm. Have 2 SDD in a raid 0. When I started out it had Bios A07. During the process of trying to get this to work I updated it to A12.
I have tried to follow the instruction regarding updating the USB 3.0 drivers
I have put in the renesas_usb3_2.1.39.0 driver from station-driver.com and the renesas_usb3_4.0.2.0 firmware. The option is ticked to turn off the power saving in usb 3.0 in the renesas dialogue.
When I plug in the usb 3.0 cable an Autoplay.
I am version 9.6.6 of the Desktop Video Windows I did previously install version 9.6.5 which came on the disk. Did uninstall this and the installed version 9.6.6
All I get in the Black Magic Media Express is a black capture screen. Please could you help? I will have to return it within 6 days if I can't get it to work.
http://www.3d-imaging.co.uk
I have:
Black Magic Intensity Shuttle USB 3.0 Serial 1088366
All I get is a black screen when I try to add a composite source to the composite video in.
I have checked the composite video with another capture device and it shows fine in there. It works fine with an EasyCap if you set it to "PAL B". The Source is a GH2 lumix camera's composite out.
I have tried the HDMI in fed from the same camera I think it is 1080p 25p. Same thing black screen. StarTech HDMI to ExpressCard HD Video Capture Card Adaptor 1080p picks it up fine.
The machine is a Dell M6600 with Windows 7 64bit sp1 i7 2920xm. Have 2 SDD in a raid 0. When I started out it had Bios A07. During the process of trying to get this to work I updated it to A12.
I have tried to follow the instruction regarding updating the USB 3.0 drivers
I have put in the renesas_usb3_2.1.39.0 driver from station-driver.com and the renesas_usb3_4.0.2.0 firmware. The option is ticked to turn off the power saving in usb 3.0 in the renesas dialogue.
When I plug in the usb 3.0 cable an Autoplay.
I am version 9.6.6 of the Desktop Video Windows I did previously install version 9.6.5 which came on the disk. Did uninstall this and the installed version 9.6.6
All I get in the Black Magic Media Express is a black capture screen. Please could you help? I will have to return it within 6 days if I can't get it to work.
http://www.3d-imaging.co.uk