- Posts: 4
- Joined: Fri Feb 22, 2013 10:18 pm
Sun Feb 07, 2016 5:05 pm
i am trying to get the composite input of my decklink studio 2 to recognize SD material from live local events here in my village. I tried other inpouts like hdmi and sdi, that works fine, but as we work there on low budget with composite video, i need to use the composite video in.
What am i doing wrong here? On the intensity pro the same videosignal works fine when connected to cable labelled Y-in, and composite selected as source.
On the studio 2 i get no image, i connected the composite signal to Composite in and select composite as incoming video.
Same as the analog audio. I can select AES/EBU or XLR, but it jumps back to AES, although i have cables connected to input 1 and 2
What am i doing wrong here? On the intensity pro the same videosignal works fine when connected to cable labelled Y-in, and composite selected as source.
On the studio 2 i get no image, i connected the composite signal to Composite in and select composite as incoming video.
Same as the analog audio. I can select AES/EBU or XLR, but it jumps back to AES, although i have cables connected to input 1 and 2