- Posts: 3
- Joined: Tue Mar 28, 2017 4:52 pm
HDMI Output: [NTSC] 3840 x 2160 (30p/24p) / 1920 x 1080 (60p/24p) / 1920 x 1080 (60i), YCbCr 4:2:2 8bit/ RGB 8bit. It also is not a 10-bit output, as rumored.
The VA will only display the signal is receives, 1080p50 shows the camera is outputting HD at 50fps, and this is how the frame rate is displayed. There is no separate fps display. Try setting your camera to 4K(UHD) 2160p30 and see what the VA displays.
Cheesy Cam added this about the Sony A7Sii:
Someone commented earlier about a problem with the BlackMagic Video Assist Recorder/Monitor stuck capturing only 1080/60p. This is actually a problem I ran into a while ago even on the Atomos Shogun, so the problem is not with the BMVD, it's with the Sony A7RII and Sony A7sII.
Even if you set your HDMI output to 1080/24, it will only output 60p 'if' you have your camera recording set to 4K/24. In order to fix (more like workaround) this issue, you have to change your camera recording to 1080/24, and then your HDMI will output properly.