Teranex Mini SDI 12gDA

Getting started with a Blackmagic product? Ask questions here about setup and installation.
  • Author
  • Message
Offline

MichaelDalton

  • Posts: 4
  • Joined: Sat Dec 30, 2017 7:09 am

Black magic Teranex Mini SDI DA

PostSat Dec 30, 2017 7:15 am

Gosh, a lot of pressure before New Year's event. I have a Decimator MD-HX in front of DA... DA not sending any signal. Dip switches exist but no instruction on those. Went through almost every combination of dip switches.

Input source and output all 1080p60 devices, no scaling needed. At this point I think I have a faulty piece of equipment or a bad fuse.

Any ideas? Went from Decimator MD HX to each output with each cable to rule out bad cables, etc. All worked perfectly. Once I put DA back in mix, nothing.

Any help would be great at this point.
Offline

MichaelDalton

  • Posts: 4
  • Joined: Sat Dec 30, 2017 7:09 am

Teranex Mini SDI 12gDA

PostTue Jan 02, 2018 12:50 am

Is the 12G DA not compatible with the Decimator MD HX. Didn't not work for my New Year's show and used older technology that worked perfectly.
Offline
User avatar

Jack Fairley

  • Posts: 927
  • Joined: Mon Oct 03, 2016 7:58 pm
  • Location: Los Angeles

Re: Teranex Mini SDI 12gDA

PostWed Jan 03, 2018 12:06 am

My guess is that you were having a 3G-SDI level A vs level B compatibility issue.
Threadripper 1950X 3.7GHz
64GB DDR4-2666
2x GTX 1080 Ti
DeckLink 4K Extreme 12G
Resolve Studio 15.1.2
Windows 10 Pro 1803
Offline

MichaelDalton

  • Posts: 4
  • Joined: Sat Dec 30, 2017 7:09 am

Re: Teranex Mini SDI 12gDA

PostWed Jan 03, 2018 1:39 am

Jack Fairley wrote:My guess is that you were having a 3G-SDI level A vs level B compatibility issue.
Decimator can be switched to A or B, tried both. Didn't work.

Sent from my Pixel XL using Tapatalk
Offline
User avatar

Jack Fairley

  • Posts: 927
  • Joined: Mon Oct 03, 2016 7:58 pm
  • Location: Los Angeles

Re: Teranex Mini SDI 12gDA

PostWed Jan 03, 2018 4:17 am

In that case my guess would be that the DA is not working as it should. Your setup sounds pretty standard.
Threadripper 1950X 3.7GHz
64GB DDR4-2666
2x GTX 1080 Ti
DeckLink 4K Extreme 12G
Resolve Studio 15.1.2
Windows 10 Pro 1803

Return to Getting Started

Who is online

Users browsing this forum: No registered users and 4 guests