Page 1 of 1

Black magic Teranex Mini SDI DA

PostPosted: Sat Dec 30, 2017 7:15 am
by MichaelDalton
Gosh, a lot of pressure before New Year's event. I have a Decimator MD-HX in front of DA... DA not sending any signal. Dip switches exist but no instruction on those. Went through almost every combination of dip switches.

Input source and output all 1080p60 devices, no scaling needed. At this point I think I have a faulty piece of equipment or a bad fuse.

Any ideas? Went from Decimator MD HX to each output with each cable to rule out bad cables, etc. All worked perfectly. Once I put DA back in mix, nothing.

Any help would be great at this point.

Teranex Mini SDI 12gDA

PostPosted: Tue Jan 02, 2018 12:50 am
by MichaelDalton
Is the 12G DA not compatible with the Decimator MD HX. Didn't not work for my New Year's show and used older technology that worked perfectly.

Re: Teranex Mini SDI 12gDA

PostPosted: Wed Jan 03, 2018 12:06 am
by Jack Fairley
My guess is that you were having a 3G-SDI level A vs level B compatibility issue.

Re: Teranex Mini SDI 12gDA

PostPosted: Wed Jan 03, 2018 1:39 am
by MichaelDalton
Jack Fairley wrote:My guess is that you were having a 3G-SDI level A vs level B compatibility issue.
Decimator can be switched to A or B, tried both. Didn't work.

Sent from my Pixel XL using Tapatalk

Re: Teranex Mini SDI 12gDA

PostPosted: Wed Jan 03, 2018 4:17 am
by Jack Fairley
In that case my guess would be that the DA is not working as it should. Your setup sounds pretty standard.