Page 1 of 1
Intensity Shuttle won't recognise HDMI 1080p
Posted:
Sat Feb 10, 2018 7:23 amby admiraltk
I'm try to stream video from my Sony RX100 Mk3 HDMI out port through the Shuttle to my Mac. I can see the video feed in the BM Media Express when I set the camera to 1080i, however when I set the camera to 1080p the signal is not detected.
As I use 1080p, I would much prefer to capture in this. Any ideas why it may be dropping out?
Thanks
Re: Intensity Shuttle won't recognise HDMI 1080p
Posted:
Mon Feb 12, 2018 11:17 pmby Tony Rivera
Most likely that the source is outputting a feed that's above a 1080p30. The Intensity Shuttle will not support formats above 1080p30 but you can see the list of supported formats on the
tech spec page of the product.
Re: Intensity Shuttle won't recognise HDMI 1080p
Posted:
Wed May 06, 2020 4:09 pmby FoxRunStudio
I was only able to get the Sony 6500 to work using 1080i60 and setting the software to 1080i 59.94. Clearly, Sony cameras are not exactly labeled correctly. I have it working in OBS with a matching setting.
Re: Intensity Shuttle won't recognise HDMI 1080p
Posted:
Thu May 07, 2020 4:27 amby Denny Smith
Yes many cameras list their frame rate at 24, 30 and 60fps, but in reality they are actually 23.94, 29.97, and 59.94. It is always best to connect a camera in question directly to a monitor and etc what it is actually outputting.
Cheers