HDMI to SDI micro converter problem
Posted: Wed Jul 04, 2018 4:12 pm
We have a small school studio which is using the ATEM 1 M/E Production Studio 4K. This switcher only has 1 HDMI input. We need more. Want to run one from a PC (to play videos) and one from a Mac to create green screen backgrounds.
When we plug in the PC into the HDMI input, we can see the PC on the Multiview screen
When we plug the Mac in the HDMI input, we can see the Mac on the Multiview screen.
We thought we could purchase the BM Micro Converter to HDMI to SDI and simply run either the Mac or the PC HDMI through the box and output an SDI into an SDI input on the switcher. But we do not get any image on the Multiview when we do this. We updated the software to the converter and tested all our cables. But still nothing.. What are we missing?
We are using 1080i 59.94 and tried other settings as well, but nothing.
Tried 1080p, 59.94, 29.97 and no luck
When we plug in the PC into the HDMI input, we can see the PC on the Multiview screen
When we plug the Mac in the HDMI input, we can see the Mac on the Multiview screen.
We thought we could purchase the BM Micro Converter to HDMI to SDI and simply run either the Mac or the PC HDMI through the box and output an SDI into an SDI input on the switcher. But we do not get any image on the Multiview when we do this. We updated the software to the converter and tested all our cables. But still nothing.. What are we missing?
We are using 1080i 59.94 and tried other settings as well, but nothing.
Tried 1080p, 59.94, 29.97 and no luck