Powering the BM6K pro and tilta nano II with the same vmount

Hi! I'm researching if it is possible and safe to power the camera and the tilta nano II with the same vmount. I have a ZGCINE vmount battery, that has a dtap, that I use to power the camera, and USB-C, that I could use for the tilta nano motor. I haven't found anyone using this USB-C out to power the follow focus, only another dtap of a battery plate. Has anyone tried this? Is there any risks, like powering the monitor with the same battery as the camera?

https://www.bhphotovideo.com/c/product/ ... power.html

Get that and an Dtap splitter.

If you use either a V or Gold Mount batteries you'll likely have some sort of battery plate attached to your rig. I use this one: https://www.bhphotovideo.com/c/product/1643741-REG/smallrig_3204_v_mount_battery_adapter_plate.html/?ap=y&ap=y&smp=y&smp=y&lsft=BI%3A6879&gad_source=1&gclid=CjwKCAjwupGyBhBBEiwA0UcqaJ7V-2L1Qb5yiSo2UXMMaGXA_k061IwcT_VtTyyaNlWnjr6az8_riRoCTF4QAvD_BwE

It's got one 14.8V D-Tap output, one 5V/2A USB output, one 8 VDC barrel output, and two 12 VDC barrel outputs around the sides of the plate. One of the things I really like about this plate is that it has a switch.

Additionally since I use Core batteries they have a single P-tap batter good to power 12V devices as well as a 5v USB port for cell phones and such. Many other batteries do the same.

You can see there are lots of power ports. Almost a power distribution center.

Here's my camera, everything works fine.


https://tilta.com/shop/tiltaing-v-mount ... -plate-v2/

Hi! I'm researching if it is possible and safe to power the camera and the tilta nano II with the same vmount. I have a ZGCINE vmount battery, that has a dtap, that I use to power the camera, and USB-C, that I could use for the tilta nano motor. I haven't found anyone using this USB-C out to power the follow focus, only another dtap of a battery plate. Has anyone tried this? Is there any risks, like powering the monitor with the same battery as the camera?

Shouldn't be a problem, the Tilta Nano II isn't drawing too much power. I've done this with a SWIT V-Mount battery.

Hi! I'm researching if it is possible and safe to power the camera and the tilta nano II with the same vmount. I have a ZGCINE vmount battery, that has a dtap, that I use to power the camera, and USB-C, that I could use for the tilta nano motor. I haven't found anyone using this USB-C out to power the follow focus, only another dtap of a battery plate. Has anyone tried this? Is there any risks, like powering the monitor with the same battery as the camera?

Shouldn't be a problem, the Tilta Nano II isn't drawing too much power. I've done this with a SWIT V-Mount battery.

Nice! thanks for the answer!