Blackmagic Camera Utility 1.9.3 - BMCC & BMPCC support

The place for questions about shooting with Blackmagic Cameras.
  • Author
  • Message
Offline

Willem Timmersma

  • Posts: 190
  • Joined: Mon Apr 08, 2013 11:30 pm

Blackmagic Camera Utility 1.9.3 - BMCC & BMPCC support

PostThu Aug 21, 2014 8:15 am

What's new in Blackmagic Camera Utility 1.9.3
Blackmagic Pocket Cinema Camera

Add histogram, time remaining and audio level indicators. Use Up and Down to reveal and hide the meters while Left and Right will adjust the aperture of your active MFT lens.
Fixed bug where in-camera playback may sometimes drop frames.

Blackmagic Cinema Camera

Add histogram, time remaining and audio level indicators.

Blackmagic URSA

No changes

Blackmagic Production Camera 4K

No changes
Blackmagic Studio Camera

No changes

Blackmagic Studio Camera 4K

No changes

Minimum system requirements for Mac OS X

Mac OS X 10.9 Mavericks or later
Mac OS X 10.8 Mountain Lion or later
A suitable USB 2.0 port
Thunderbolt port for UltraScope and Media Express when using Blackmagic Cinema Camera or Blackmagic Production Camera 4K

Minimum system requirements for Windows

Microsoft Windows 8 64-bit
Microsoft Windows 7 64-bit
A suitable USB 2.0 port
A suitable Thunderbolt port when using Blackmagic Cinema Camera or Blackmagic Production Camera 4K

Installing Blackmagic Camera Utility

Before installing the software, we recommend that you run "Uninstall Camera Utility" first.

After loading the software on the Blackmagic Cinema Camera EF or MFT, you may notice a slight flickering on the built-in LCD screen. This is normal and expected behaviour. The flickering will go away after a few minutes of operation.
The Blackmagic Camera Installer package installs:

Blackmagic Camera Utility
Blackmagic Media Express
Blackmagic UltraScope
Blackmagic Disk Speed Test

Additional Information

Some applications may use third party code under license. For details please refer to the included "Third Party Licenses.rtf" document.

© 2014 Blackmagic Design Pty. Ltd. All rights reserved. Blackmagic Design, Blackmagic, DeckLink, Multibridge, HDLink, Videohub, and "Leading the creative video revolution" are trademarks of Blackmagic Design Pty. Ltd., registered in the U.S.A and other countries.

Updated August 21, 2014.
Offline
User avatar

Yann Kibongui

  • Posts: 22
  • Joined: Mon Jul 28, 2014 10:29 pm
  • Location: Paris, FRANCE

Re: Blackmagic Camera Utility 1.9.3 - BMCC & BMPCC support

PostThu Aug 21, 2014 8:21 am

Some good news here ! :D
Diy guru

https://vimeo.com/yann
http://yannkibongui.com
http://blog.yannkibongui.com
Offline

Willem Timmersma

  • Posts: 190
  • Joined: Mon Apr 08, 2013 11:30 pm

Re: Blackmagic Camera Utility 1.9.3 - BMCC & BMPCC support

PostThu Aug 21, 2014 8:25 am

Probably the most wanted update! :)
Offline
User avatar

Terry O Leary

  • Posts: 93
  • Joined: Thu Oct 10, 2013 5:49 pm
  • Location: Dublin, Ireland

Re: Blackmagic Camera Utility 1.9.3 - BMCC & BMPCC support

PostThu Aug 21, 2014 8:36 am

What a wonderful day!
Offline

Jeff Meadows

  • Posts: 22
  • Joined: Mon Nov 25, 2013 11:18 pm

Re: Blackmagic Camera Utility 1.9.3 - BMCC & BMPCC support

PostThu Aug 21, 2014 8:39 am

Yes! I'm so happy right now! lol!

Just in time for todays shoot too!
Offline

Basil Hayes

  • Posts: 22
  • Joined: Tue May 27, 2014 11:32 am
  • Location: Norfolk, UK

Re: Blackmagic Camera Utility 1.9.3 - BMCC & BMPCC support

PostThu Aug 21, 2014 8:42 am

I'd love to see a screenshot of the histogram, time remaining and audio level indicators on the BMPCC screen, anyone? I guess that the output from the HDMI can still be clean?

It would be great if in a future update (not knocking Blackmagic at all with this, I think the updates they are doing are great) the buttons could be user configurable.
Offline

Kristian Lam

Blackmagic Design

  • Posts: 559
  • Joined: Tue Aug 21, 2012 1:11 pm

Re: Blackmagic Camera Utility 1.9.3 - BMCC & BMPCC support

PostThu Aug 21, 2014 8:46 am

Basil wrote:I'd love to see a screenshot of the histogram, time remaining and audio level indicators on the BMPCC screen, anyone? I guess that the output from the HDMI can still be clean?


http://www.blackmagicdesign.com/product ... nemacamera

Yes, the HDMI output can still be clean.
Offline

Arunas Eimulis

  • Posts: 16
  • Joined: Sat Apr 20, 2013 1:03 pm
  • Location: Klaipeda, Lithuania

Re: Blackmagic Camera Utility 1.9.3 - BMCC & BMPCC support

PostThu Aug 21, 2014 8:52 am

Its great!

But camera buttons would be muuutch more usable if they'd control iso and shutter speed,
I'd be more comfortable to access histogram from the menu
vimeo.com/eimulis
Offline

Basil Hayes

  • Posts: 22
  • Joined: Tue May 27, 2014 11:32 am
  • Location: Norfolk, UK

Re: Blackmagic Camera Utility 1.9.3 - BMCC & BMPCC support

PostThu Aug 21, 2014 8:53 am

And there it is, many thanks Kristian, looking good.

I shall be updating my two tonight.
Offline
User avatar

Terry O Leary

  • Posts: 93
  • Joined: Thu Oct 10, 2013 5:49 pm
  • Location: Dublin, Ireland

Re: Blackmagic Camera Utility 1.9.3 - BMCC & BMPCC support

PostThu Aug 21, 2014 8:54 am

Just being messing around with the update for a while, I love the hide/show function for the audio meters/hist, great job!
Offline

Basil Hayes

  • Posts: 22
  • Joined: Tue May 27, 2014 11:32 am
  • Location: Norfolk, UK

Re: Blackmagic Camera Utility 1.9.3 - BMCC & BMPCC support

PostThu Aug 21, 2014 8:56 am

What are the extended white balance and shutter angle options?
Offline

Robert Betzner

  • Posts: 248
  • Joined: Fri Sep 28, 2012 7:54 am
  • Location: Cologne, Germany

Re: Blackmagic Camera Utility 1.9.3 - BMCC & BMPCC support

PostThu Aug 21, 2014 8:56 am

What about the "Clean output 1080i"-bug?

Does the camera finally output 1080i again if you switch off the overlays? Beacause you broke this functionality for the Pocket with version 1.5.1. Since that version the Pocket outputs always 1080p even if you switch off the ovelays which makes it impossible to use with your ATEM switcher line.

Cheers
Offline
User avatar

Nikolay Smirnov

  • Posts: 285
  • Joined: Tue Nov 20, 2012 8:34 pm
  • Location: Moscow

Re: Blackmagic Camera Utility 1.9.3 - BMCC & BMPCC support

PostThu Aug 21, 2014 8:57 am

OMG, new WB and Shutter increasments, NOW THAT IS WHAT I WANTED.
DoP/Colorist
FADE Post-production
Offline
User avatar

Terry O Leary

  • Posts: 93
  • Joined: Thu Oct 10, 2013 5:49 pm
  • Location: Dublin, Ireland

Re: Blackmagic Camera Utility 1.9.3 - BMCC & BMPCC support

PostThu Aug 21, 2014 9:38 am

I'd love to know if anyone else is experiencing this too as it wasn't mentioned in the firmware notes, but I'm getting seriously better battery level accuracy, down to the percentage the whole way from 100% - 0%

Maybe this was added recently and I just didn't notice?
Offline
User avatar

Nikolay Smirnov

  • Posts: 285
  • Joined: Tue Nov 20, 2012 8:34 pm
  • Location: Moscow

Re: Blackmagic Camera Utility 1.9.3 - BMCC & BMPCC support

PostThu Aug 21, 2014 10:04 am

Terry O Leary wrote:I'd love to know if anyone else is experiencing this too as it wasn't mentioned in the firmware notes, but I'm getting seriously better battery level accuracy, down to the percentage the whole way from 100% - 0%

Maybe this was added recently and I just didn't notice?

what camera are you using?
DoP/Colorist
FADE Post-production
Offline

Christian Horne

  • Posts: 403
  • Joined: Sat Sep 14, 2013 8:34 am

Re: Blackmagic Camera Utility 1.9.3 - BMCC & BMPCC support

PostThu Aug 21, 2014 10:22 am

Must be for the Pocket camera as I'm still getting 100-75-50-10% battery indication on my BMCC, maybe it's because it has a different type battery compared to the internal BMCC battery?
Offline

kevinconder

  • Posts: 252
  • Joined: Wed Oct 31, 2012 3:45 pm

Re: Blackmagic Camera Utility 1.9.3 - BMCC & BMPCC support

PostThu Aug 21, 2014 10:26 am

The bmcc is now a much different, more usable, camera than what was originally released. And here we are 2 years after release,(really like a year since people got them) and, as far as I'm concerned no camera, other than the other bms, near it's price class produces a better image. For a narrative film, I'd take it over what I've seen so far from gh4, a7s, fs100, canon markIII.

BMs raw, graded in davinci, is just better. Period.
Kevin Conder
On Broken Ground Films
http://vimeo.com/kevinconder/tunnel
http://www.onbrokenground.com/blog
http://vimeopro.com/kevinconder/portfolio
Offline

olan_collardy

  • Posts: 175
  • Joined: Sat Apr 05, 2014 10:59 am
  • Location: London

Re: Blackmagic Camera Utility 1.9.3 - BMCC & BMPCC support

PostThu Aug 21, 2014 10:30 am

Nikolay Smirnov wrote:OMG, new WB and Shutter increasments, NOW THAT IS WHAT I WANTED.


is this available on BMPC4K too?
Offline
User avatar

Ulysses Paiva

  • Posts: 588
  • Joined: Sun Sep 01, 2013 8:32 pm
  • Location: Pernambuco, Brasil

Re: Blackmagic Camera Utility 1.9.3 - BMCC & BMPCC support

PostThu Aug 21, 2014 10:38 am

Finally!

Lets give it a try and be amazed... :D
Ulysses Paiva
UPMD Filmes
http://www.upmdfilmes.com.br
Offline
User avatar

Terry O Leary

  • Posts: 93
  • Joined: Thu Oct 10, 2013 5:49 pm
  • Location: Dublin, Ireland

Re: Blackmagic Camera Utility 1.9.3 - BMCC & BMPCC support

PostThu Aug 21, 2014 10:40 am

Nikolay Smirnov wrote:
Terry O Leary wrote:I'd love to know if anyone else is experiencing this too as it wasn't mentioned in the firmware notes, but I'm getting seriously better battery level accuracy, down to the percentage the whole way from 100% - 0%

Maybe this was added recently and I just didn't notice?

what camera are you using?



Sorry yea, I'm using the pocket cameras, tested in on both of them with the new firmware and they are both now showing totally accurate batt readout the whole way through, really useful
Offline

Christian Horne

  • Posts: 403
  • Joined: Sat Sep 14, 2013 8:34 am

Re: Blackmagic Camera Utility 1.9.3 - BMCC & BMPCC support

PostThu Aug 21, 2014 10:52 am

Hi Terry,
just so I'm clear on your battery read out, is your readout displaying 1% increments when your battery display or 100-75-50-10% increments? If you are getting 1% increments when did you purchase your BMCC?
Offline
User avatar

adamroberts

  • Posts: 4496
  • Joined: Wed Aug 22, 2012 5:27 am
  • Location: England, UK

Re: Blackmagic Camera Utility 1.9.3 - BMCC & BMPCC support

PostThu Aug 21, 2014 10:52 am

olan_collardy wrote:
Nikolay Smirnov wrote:OMG, new WB and Shutter increasments, NOW THAT IS WHAT I WANTED.


is this available on BMPC4K too?


Not yet. In the next update probably.
Offline

David Sandberg

  • Posts: 143
  • Joined: Mon Mar 04, 2013 3:56 pm
  • Location: Los Angeles

Re: Blackmagic Camera Utility 1.9.3 - BMCC & BMPCC support

PostThu Aug 21, 2014 10:59 am

Awesome!
Basil wrote:What are the extended white balance and shutter angle options?

White balance:
    2500K
    2800K
    3000K
    3200K
    3400K
    3600K
    4000K
    4500K
    4800K
    5000K
    5200K
    5400K
    5600K
    6000K
    6500K
    7000K
    7500K
    8000K
Shutter:
    11.25°
    15°
    22.5°
    30°
    37.5°
    45°
    60°
    72°
    75°
    90°
    108°
    120°
    144°
    150°
    172.8°
    180°
    216°
    270°
    324°
    360°

By the way, anyone know if the histogram is calculated in a funky way? I can make the highlights on the histogram look safe but still have zebras (at 100%) show up (800 ISO, 180° shutter).
Offline
User avatar

Terry O Leary

  • Posts: 93
  • Joined: Thu Oct 10, 2013 5:49 pm
  • Location: Dublin, Ireland

Re: Blackmagic Camera Utility 1.9.3 - BMCC & BMPCC support

PostThu Aug 21, 2014 11:07 am

Christian Horne wrote:Hi Terry,
just so I'm clear on your battery read out, is your readout displaying 1% increments when your battery display or 100-75-50-10% increments? If you are getting 1% increments when did you purchase your BMCC?


Hey mate,

To clarify, I'm referring to the Pocket cameras, not the BMCC or BMPC. One of which was purchased a year ago, the other just over a month. Yea the readout is displaying in 1% increments, not the 100-75-50-10 as before.
Offline

Basil Hayes

  • Posts: 22
  • Joined: Tue May 27, 2014 11:32 am
  • Location: Norfolk, UK

Re: Blackmagic Camera Utility 1.9.3 - BMCC & BMPCC support

PostThu Aug 21, 2014 11:17 am

Thanks David much appreciated,

This post about histogram and zebras should help you with your query - http://forum.blackmagicdesign.com/viewforum.php?f=2
Offline

Tyler Edwards

  • Posts: 154
  • Joined: Sat Jun 07, 2014 2:24 pm

Re: Blackmagic Camera Utility 1.9.3 - BMCC & BMPCC support

PostThu Aug 21, 2014 11:42 am

This is great news! BMD is doing awesome things!
Offline

joechiazza

  • Posts: 1116
  • Joined: Fri Aug 09, 2013 6:25 pm

Re: Blackmagic Camera Utility 1.9.3 - BMCC & BMPCC support

PostThu Aug 21, 2014 11:59 am

olan_collardy wrote:
Nikolay Smirnov wrote:OMG, new WB and Shutter increasments, NOW THAT IS WHAT I WANTED.


is this available on BMPC4K too?

Is it availble for the 4k? This is awesome!


Sent from my iPhone using Tapatalk
Offline

joechiazza

  • Posts: 1116
  • Joined: Fri Aug 09, 2013 6:25 pm

Re: Blackmagic Camera Utility 1.9.3 - BMCC & BMPCC support

PostThu Aug 21, 2014 12:00 pm

BMD is doing awesome on updates. I seriously hope they keep it up!


Sent from my iPhone using Tapatalk
Offline
User avatar

adamroberts

  • Posts: 4496
  • Joined: Wed Aug 22, 2012 5:27 am
  • Location: England, UK

Re: Blackmagic Camera Utility 1.9.3 - BMCC & BMPCC support

PostThu Aug 21, 2014 1:30 pm

joechiazza wrote:
olan_collardy wrote:is this available on BMPC4K too?

Is it availble for the 4k?

viewtopic.php?f=2&t=26375#p164128
Offline

Tim Callaghan

  • Posts: 99
  • Joined: Fri Sep 06, 2013 11:58 pm

Re: Blackmagic Camera Utility 1.9.3 - BMCC & BMPCC support

PostThu Aug 21, 2014 2:32 pm

Gol Gol Gol Gol Gol Gooooooooooooooooooooooooooool!

Well done boys (and girls), pat yourselves on the back for getting this delivered. You took your time, but you have delivered, and what's more...additional value.
Offline

Göran Diffner

  • Posts: 212
  • Joined: Fri Feb 07, 2014 1:15 am

Re: Blackmagic Camera Utility 1.9.3 - BMCC & BMPCC support

PostThu Aug 21, 2014 3:35 pm

Robert Betzner wrote:What about the "Clean output 1080i"-bug?

Does the camera finally output 1080i again if you switch off the overlays? Beacause you broke this functionality for the Pocket with version 1.5.1. Since that version the Pocket outputs always 1080p even if you switch off the ovelays which makes it impossible to use with your ATEM switcher line.

Cheers


I am intersested in this too did somebody test this?
Offline

Scott Stacy

  • Posts: 915
  • Joined: Sun Apr 28, 2013 4:02 pm
  • Location: Kansas City

Re: Blackmagic Camera Utility 1.9.3 - BMCC & BMPCC support

PostThu Aug 21, 2014 3:45 pm

Yes!! Yes!!! Yes!!!
Scott Stacy, C.S.I.
Heliopause Pictures
scott@hppictures.com
Offline

Peter Odio

  • Posts: 98
  • Joined: Mon Feb 04, 2013 5:44 am
  • Location: Los Angeles

Re: Blackmagic Camera Utility 1.9.3 - BMCC & BMPCC support

PostThu Aug 21, 2014 3:51 pm

This was my wish list. I was told by Dan May that RAW compressed will not happen on the BMCC. Audio meters: Done. SSD Minutes remaining: Done. Thirds on camera. Maybe?

Re: BMCC Firmware 1.9 feature requests.
Mon Jul 21, 2014 12:27 pm

For the BMCC 2.5K
1 - Compressed RAW on BMCC
2 - Audio meters
3 - SSD minutes remaining
4 - Thirds on the camera monitor

Thanks.
promedios.tv
Offline

David Sandberg

  • Posts: 143
  • Joined: Mon Mar 04, 2013 3:56 pm
  • Location: Los Angeles

Re: Blackmagic Camera Utility 1.9.3 - BMCC & BMPCC support

PostThu Aug 21, 2014 4:06 pm

Peter Odio wrote:I was told by Dan May that RAW compressed will not happen on the BMCC.
Any reason given why this can't be done?
Offline
User avatar

Lorenzo Straight

  • Posts: 267
  • Joined: Wed Aug 22, 2012 8:52 am
  • Location: Atlanta, Ga

Re: Blackmagic Camera Utility 1.9.3 - BMCC & BMPCC support

PostThu Aug 21, 2014 4:23 pm

Nice. Thanks BMD. Much more useful camera now.
MSI GS60 Ghost Pro-4K-605-2.7 GHz Intel Core i7-5700HQ (Broadwell)-16GB of 1600 MHz DDR3L RAM-1TB 7200 rpm HDD + 128GB M.2 SSD-NVIDIA GeForce GTX 970M GPU (6GB GDDR5)-15.6" UHD + 4K IPS Display-3840 x 2160
-Windows 8.1
Offline

joechiazza

  • Posts: 1116
  • Joined: Fri Aug 09, 2013 6:25 pm

Re: Blackmagic Camera Utility 1.9.3 - BMCC & BMPCC support

PostThu Aug 21, 2014 4:27 pm

Anybody else wish that we could get a slower shutter speed than 360?
Offline

Edward Zaee

  • Posts: 7
  • Joined: Fri Jul 11, 2014 4:29 am

Re: Blackmagic Camera Utility 1.9.3 - BMCC & BMPCC support

PostThu Aug 21, 2014 4:50 pm

joechiazza wrote:Anybody else wish that we could get a slower shutter speed than 360?



Wut?
:?

Btw, thank you Blackmagicdesign team, keep up the good work.
Offline

joechiazza

  • Posts: 1116
  • Joined: Fri Aug 09, 2013 6:25 pm

Re: Blackmagic Camera Utility 1.9.3 - BMCC & BMPCC support

PostThu Aug 21, 2014 4:58 pm

Edward Zaee wrote:
joechiazza wrote:Anybody else wish that we could get a slower shutter speed than 360?



Wut?
:?

Btw, thank you Blackmagicdesign team, keep up the good work.

Longer shutter than 360, to do light streaks and stuff like that.
Offline

David Sandberg

  • Posts: 143
  • Joined: Mon Mar 04, 2013 3:56 pm
  • Location: Los Angeles

Re: Blackmagic Camera Utility 1.9.3 - BMCC & BMPCC support

PostThu Aug 21, 2014 5:02 pm

joechiazza wrote:Anybody else wish that we could get a slower shutter speed than 360?
Technically speaking that's not possible since 360 degrees means that it's open for the entire duration of the frame. I guess you mean it would be nice to do long exposures during timelapses?

It seems that when doing timelapses right now it still counts the shutter angle as if it were 24 fps or something.
If it really was a proper 360 degree shutter when you're at, say 1 fps, the frame would be exposed for that whole second (and you'd get streaks from moving lights etc).
Offline
User avatar

Kevin DeOliveira

  • Posts: 239
  • Joined: Fri Mar 14, 2014 8:09 pm

Re: Blackmagic Camera Utility 1.9.3 - BMCC & BMPCC support

PostThu Aug 21, 2014 5:08 pm

Awesome!

I'm really bummed the new white balance increments for the 4k weren't part of the update, but I'm super happy they are coming. So very necessary.
BMPC4k / BMPCC / URSA Mini (Pre-order)
kevdeo.com
Offline

Nicolas Belokurov

  • Posts: 126
  • Joined: Wed Sep 11, 2013 10:47 pm
  • Location: Argentina

Re: Blackmagic Camera Utility 1.9.3 - BMCC & BMPCC support

PostThu Aug 21, 2014 5:31 pm

I wonder if the shutter angle could be controlled in real time in a future firmware
Offline

Nicolas Belokurov

  • Posts: 126
  • Joined: Wed Sep 11, 2013 10:47 pm
  • Location: Argentina

Re: Blackmagic Camera Utility 1.9.3 - BMCC & BMPCC support

PostThu Aug 21, 2014 5:33 pm

P.S. Awesome update, thanks BMD!
Offline
User avatar

raadgie

  • Posts: 123
  • Joined: Sat Apr 13, 2013 11:22 am

Re: Blackmagic Camera Utility 1.9.3 - BMCC & BMPCC support

PostThu Aug 21, 2014 5:51 pm

Great JOB!

And now more FPS!!! 8-)
Karl von Bahnhof
CEO
Chicken shots production
Offline

Nicolas Belokurov

  • Posts: 126
  • Joined: Wed Sep 11, 2013 10:47 pm
  • Location: Argentina

Re: Blackmagic Camera Utility 1.9.3 - BMCC & BMPCC support

PostThu Aug 21, 2014 5:57 pm

raadgie wrote:Great JOB!

And now more FPS!!! 8-)



More FPS === URSA :P
Offline
User avatar

raadgie

  • Posts: 123
  • Joined: Sat Apr 13, 2013 11:22 am

Re: Blackmagic Camera Utility 1.9.3 - BMCC & BMPCC support

PostThu Aug 21, 2014 6:07 pm

Nicolas Belokurov wrote:
raadgie wrote:Great JOB!

And now more FPS!!! 8-)



More FPS === URSA :P


Clearly, I will come to see how you install the URSA on a helmet or bike.

... ever 50/60 .... pls :D
Karl von Bahnhof
CEO
Chicken shots production
Offline

Nicolas Belokurov

  • Posts: 126
  • Joined: Wed Sep 11, 2013 10:47 pm
  • Location: Argentina

Re: Blackmagic Camera Utility 1.9.3 - BMCC & BMPCC support

PostThu Aug 21, 2014 6:22 pm

raadgie wrote:
Nicolas Belokurov wrote:
raadgie wrote:Great JOB!

And now more FPS!!! 8-)



More FPS === URSA :P


Clearly, I will come to see how you install the URSA on a helmet or bike.

... ever 50/60 .... pls :D


Just look for a bigger helmet LOL

Image
Offline

matt brown

  • Posts: 23
  • Joined: Mon Jul 22, 2013 3:51 pm
  • Location: UK Midlands

Re: Blackmagic Camera Utility 1.9.3 - BMCC & BMPCC support

PostThu Aug 21, 2014 6:24 pm

Nice update Blackmagic.. thanks :)

It would be the icing on the cake to get slower shutter speeds for time lapse as mentioned above :) :)
Offline

Thomas Thiele

  • Posts: 435
  • Joined: Mon Jul 22, 2013 10:16 am
  • Location: Erfurt, Germany

Re: Blackmagic Camera Utility 1.9.3 - BMCC & BMPCC support

PostThu Aug 21, 2014 6:34 pm

And frames for 4:3, 3:2, 1:2.35 etc ... at least for 1:2.35
BMPCC, Lumix G3, GF3
pana 7-14, SLRM 12/T1.6, sigma 19, pana 20/1.7, pana 14-42, pana 45-150,
pentacon auto 29/2.8, 50/1.8, 135/2.8.
Offline

Alex Krukov

  • Posts: 14
  • Joined: Thu Apr 10, 2014 7:59 pm
  • Location: Minsk. Republic of Belarus

Re: Blackmagic Camera Utility 1.9.3 - BMCC & BMPCC support

PostThu Aug 21, 2014 6:56 pm

Thanks BMD this is what i need!(dream) Nice update!!)))
http://instagram.com/takegift me on instagram) see you there
Offline
User avatar

Michael Sharps

  • Posts: 14
  • Joined: Tue Oct 22, 2013 7:40 pm
  • Location: Concord, CA

Re: Blackmagic Camera Utility 1.9.3 - BMCC & BMPCC support

PostThu Aug 21, 2014 8:01 pm

Christmas in August! Great implementation of the new features (I have the bmpcc). THANK YOU!!
Michael Sharps
www.sharpsphotography.com
Next

Return to Cinematography

Who is online

Users browsing this forum: John Richard, Ola Harström, Yahoo [Bot] and 12 guests