Some problems with Crucial M4 512GB - [unsolved]
Posted: Mon Mar 04, 2013 9:13 pm
EDIT: Could be a SOLUTION: USE THE 009 FIRMWARE
--> it's NOT possible to downgrade from 000F (icicle22)
Hi!
I have three SSDs in use. All crucial m4 512GB. Latest firmware 040H.
Now on the first SSD shooting isn't longer possible. (After two copmlete write cycles) REC flashes after about 5 - 60 seconds. (2.5 RAW 25p)
I formatted, partitioned, try to let the drives 12 hours left on power only (crucial support told me that the GC will work this way) and used the tool "FreeSpaceCleaner.exe" to write the SSD with 0's.
Nothing! Only defective recordings. The other SSDs work, but for how long? With a benchmarktool i become stable values about 400GBs/200GBs (read/write).
I think it's wired because there are only four SSDs in the BMD list around 500GB, and I relied on it that it has been tested. SSDs are not cheap ;-( Interesting is that the Samsung 830er SSD was removed from this list!
What should I try?
Thank you
Franz
--> it's NOT possible to downgrade from 000F (icicle22)
Hi!
I have three SSDs in use. All crucial m4 512GB. Latest firmware 040H.
Now on the first SSD shooting isn't longer possible. (After two copmlete write cycles) REC flashes after about 5 - 60 seconds. (2.5 RAW 25p)
I formatted, partitioned, try to let the drives 12 hours left on power only (crucial support told me that the GC will work this way) and used the tool "FreeSpaceCleaner.exe" to write the SSD with 0's.
Nothing! Only defective recordings. The other SSDs work, but for how long? With a benchmarktool i become stable values about 400GBs/200GBs (read/write).
I think it's wired because there are only four SSDs in the BMD list around 500GB, and I relied on it that it has been tested. SSDs are not cheap ;-( Interesting is that the Samsung 830er SSD was removed from this list!
What should I try?
Thank you
Franz