Monitor hood for BMPCC4k?

The place for questions about shooting with Blackmagic Cameras.
  • Author
  • Message
Offline

alessandroshoots

  • Posts: 15
  • Joined: Thu Jan 03, 2019 7:50 am
  • Real Name: Alessandro Chille

Monitor hood for BMPCC4k?

PostMon Jan 07, 2019 12:17 am

Got my P4K last week and have been having a blast. Has anyone found a monitor hood that easily attaches to the camera’s built in monitor? Trying not to make the leap to an external monitor just yet.

Thanks!
Offline
User avatar

dondidnod

  • Posts: 633
  • Joined: Sun Nov 25, 2018 7:52 am
  • Location: Castro Valley, CA
  • Real Name: Donald Keller

Re: Monitor hood for BMPCC4k?

PostTue Jan 08, 2019 8:04 am

I have a 3DR Screen Hood for Select Tablets B&H # 3DTS11ATSH MFR # TS11A for a 3DR Solo Quadcopter that is 8 3/8" wide, 6 7/8" deep and 5 1/8" high. It was designed for the 7.87" x 5.3" Apple iPad mini 2. I have a Smallrig 2203 full cage and use a Sony NP-F970 battery mounted vertically next to my Samsung T5 SSD using the included bracket from a 12V kit with BMPCC4K power connector from the Ringteam Tech Store on Aliexpress.
If I attach some adhesive backed Velcro to the bottom of the battery then I can use it to mount the hood below it. The side panels of the hood fold down and magnetically attach to two 15/16" side tabs that fold out from the smartphone back plate. I should be able to cut out that plate to view the screen and operate the screen buttons. The side panel can be tilted out to the side and then snap back in place if my hand needs more room to push the screen buttons.
Offline

Dalavi Tang

  • Posts: 18
  • Joined: Wed Jun 24, 2015 2:40 am

Re: Monitor hood for BMPCC4k?

PostTue Jan 08, 2019 8:48 am

Tilta makes a cage for the BMPCC 4K, and among the (tons of) optional accessories is a rubber hood for the screen that attaches to the cage via a screw. I bought the hood but when I attach a V-mount or gold mount battery to the rear of the camera, the screen will definitely be obscured nevertheless (and it does not swivel), so I would still use an external monitor in this case. But if you want to use the screen outdoors in some circumstances, then there you have a decent solution.
They also make an extended hood that is very deep and should work very well blocking all the light hitting the screen and there's a cut-out on the bottom for touch-screen accessibility. But Tilta is apparently still working on their production, they still haven't shipped my V-mount battery plate yet because their production hasn't caught up yet. You'd better ask about availability before you order.
Offline

Lesha_kvaz

  • Posts: 42
  • Joined: Tue Oct 09, 2018 9:53 am
  • Location: Ukraine
  • Real Name: Aleksey Kuzmenko

Re: Monitor hood for BMPCC4k?

PostTue Jan 08, 2019 11:36 am

SmallRig is in preproduction stage. Metal frame that will be attachable to the cage, with fast removable (and maybe foldable) hood


Отправлено с моего iPhone используя Tapatalk
Offline

alessandroshoots

  • Posts: 15
  • Joined: Thu Jan 03, 2019 7:50 am
  • Real Name: Alessandro Chille

Re: Monitor hood for BMPCC4k?

PostTue Jan 08, 2019 9:24 pm

Brilliant suggestions, thank you! I ended up ordering one of the smartphone sun hoods recommended. Might rig it up with some velcro.
Offline

marcellomazzilli

  • Posts: 148
  • Joined: Mon Sep 17, 2012 12:06 am

Re: Monitor hood for BMPCC4k?

PostTue Jan 08, 2019 10:49 pm

Designed my own with the help of a friend and we 3d printed it.
Go interchangeable bracket for naked camera, SmallRig cage etc
Attachments
80AAC0C6-A667-463F-9514-001AC54C1C2B.jpeg
80AAC0C6-A667-463F-9514-001AC54C1C2B.jpeg (191.11 KiB) Viewed 4263 times
Marcello Mazzilli
Offline

dsorbera

  • Posts: 75
  • Joined: Thu Nov 29, 2018 10:29 pm
  • Real Name: Daniel Sorbera

Re: Monitor hood for BMPCC4k?

PostWed Jan 09, 2019 12:16 am

That looks great. What I really want to do is get someone to 3d print me out an adapter that would go from 5" down to 3" so my zacuto loupe could clip onto it.
Offline
User avatar

dondidnod

  • Posts: 633
  • Joined: Sun Nov 25, 2018 7:52 am
  • Location: Castro Valley, CA
  • Real Name: Donald Keller

Re: Monitor hood for BMPCC4k?

PostWed Jan 09, 2019 12:46 am

Without cutting it up (I still want to have one for my Quadcopter, so I will order another) I taped my 3DR Screen hood against my BMPCC4K. The bottom fits flush with the cage bottom. I added 1/8" of cardboard below the battery to simulate Velcro. The Hood has not been cutout for the battery holder so it tilts down and doesn't line up with the bottom of the battery. The top of the hood is magnetically attached to the sides of it's base and could tilt up more if it wasn't square with it. There is plenty of room to operate the buttons. There is a lot of shade for direct sunlight but you would have to hold the camera up high to see through the hood.
Attachments
P_20190108_153325_HoodA.jpg
3DR Screen Hood on BMPCC4K Smallrig 2203 cage
P_20190108_153325_HoodA.jpg (965.55 KiB) Viewed 4250 times
Offline
User avatar

dondidnod

  • Posts: 633
  • Joined: Sun Nov 25, 2018 7:52 am
  • Location: Castro Valley, CA
  • Real Name: Donald Keller

Re: Monitor hood for BMPCC4k?

PostWed Jan 09, 2019 12:56 am

Here's another shot from a different angle.
Attachments
P_20190108_153024_1_HoodB.jpg
3DR Hood left side
P_20190108_153024_1_HoodB.jpg (964.02 KiB) Viewed 4246 times
Offline
User avatar

dondidnod

  • Posts: 633
  • Joined: Sun Nov 25, 2018 7:52 am
  • Location: Castro Valley, CA
  • Real Name: Donald Keller

Re: Monitor hood for BMPCC4k?

PostWed Jan 09, 2019 1:02 am

An overhead shot.
Attachments
P_20190108_153355_HoodA.jpg
3DR Hood on Smallrig cage overhead
P_20190108_153355_HoodA.jpg (869.98 KiB) Viewed 4249 times
Offline

Mike Patterson

  • Posts: 14
  • Joined: Tue Dec 16, 2014 9:41 am
  • Location: Hong Kong

Re: Monitor hood for BMPCC4k?

PostThu Jan 10, 2019 3:51 am

I already had this ProAm hood (US$18) for my video assist 5inch - just added a thin strip of stickyback velcro around the screen on my BMPCC 4K. Think they're also available on Amazon
https://www.bhphotovideo.com/c/product/1090222-REG/proam_usa_p5h_5_lcd_video_monitor.html
Cheers, Mike
Offline

alessandroshoots

  • Posts: 15
  • Joined: Thu Jan 03, 2019 7:50 am
  • Real Name: Alessandro Chille

Re: Monitor hood for BMPCC4k?

PostThu Jan 10, 2019 10:43 pm

Got the RC GearPro Foldable Smartphone iPads Tablets Monitor Sunshade Sun Hood Cover for DJI Mavic Air/Pro / Spark/Phantom 3 4 Pro/Inspire 1 2 / Osmo and Other RC Drones Remote Controller Sun Shield (L111)

Slips right onto the camera with the included rubber, I'm happy!
IMG_8347.jpg
IMG_8347.jpg (979.69 KiB) Viewed 4143 times
Offline

nathangrayston

  • Posts: 3
  • Joined: Thu Apr 18, 2019 1:49 pm
  • Real Name: Nathan Grayston

Re: Monitor hood for BMPCC4k?

PostThu Apr 18, 2019 2:07 pm

marcellomazzilli wrote:Designed my own with the help of a friend and we 3d printed it.
Go interchangeable bracket for naked camera, SmallRig cage etc


This looks great! Would you mind sharing your design files? I'd love to print this myself.
Offline

nizg78

  • Posts: 5
  • Joined: Wed Mar 27, 2019 7:28 am
  • Real Name: ZhengGang Ni

Re: Monitor hood for BMPCC4k?

PostSat Apr 20, 2019 5:25 am

nathangrayston wrote:
marcellomazzilli wrote:Designed my own with the help of a friend and we 3d printed it.
Go interchangeable bracket for naked camera, SmallRig cage etc


This looks great! Would you mind sharing your design files? I'd love to print this myself.


Me too. I'd be happy to donate to have the design files fitting Smallrig cage.
Offline

Niklas Olofsson

  • Posts: 114
  • Joined: Wed Apr 22, 2015 8:00 pm

Re: Monitor hood for BMPCC4k?

PostSat Apr 27, 2019 1:24 pm

nizg78 wrote:
nathangrayston wrote:
marcellomazzilli wrote:Designed my own with the help of a friend and we 3d printed it.
Go interchangeable bracket for naked camera, SmallRig cage etc


This looks great! Would you mind sharing your design files? I'd love to print this myself.


Me too. I'd be happy to donate to have the design files fitting Smallrig cage.


What about fitting a 8Sinn cage?
Offline
User avatar

focuspulling

  • Posts: 207
  • Joined: Thu Jul 18, 2013 9:09 pm
  • Location: Washington, D.C.

Re: Monitor hood for BMPCC4k?

PostWed May 08, 2019 6:42 pm

This seems like a reasonable option:



It's under sixty bucks too:

https://bhpho.to/2PSeJww
Paul Moon | FocusPulling (.com) | On the art & technology of filmmaking
www.focuspulling.com | facebook.com/focuspulling | @focuspulling
Offline
User avatar

focuspulling

  • Posts: 207
  • Joined: Thu Jul 18, 2013 9:09 pm
  • Location: Washington, D.C.

Re: Monitor hood for BMPCC4k?

PostWed May 08, 2019 6:48 pm

alessandroshoots wrote:Got the RC GearPro Foldable Smartphone iPads Tablets Monitor Sunshade Sun Hood Cover for DJI Mavic Air/Pro / Spark/Phantom 3 4 Pro/Inspire 1 2 / Osmo and Other RC Drones Remote Controller Sun Shield (L111)

Slips right onto the camera with the included rubber, I'm happy!
IMG_8347.jpg

I think you misidentified the model number; although the general description text is the same for the L111, which of these did you actually purchase and show us here:

1. L111 - Compatible with iPhone 6, iPhone 7, Samsung S6 / S6 edge, Samsung S7 / S7 edge, XIAOMI Mi 5 / 4 / 4C.
2. L121 - Compatible with LG G4 / G5, XIAOMI Note, VIVO X6 / X7, HUAWEI P8 / P9 / Honor 8.
3. L128 - Compatible with iPhone 6 Plus / 7 Plus, Samsung Galaxy Note 5 / Note 7 / S7 edge, HUAWEI Mate / P9 Plus / P10 / P10 Plus / Honor 6X.
4. L168 - Compatible with iPad mini / Mini 2 / Mini 3 / Mini 4, Samsung Galaxy Tab A 8.0", Galaxy Tab S2 8.0", XIAOMI Mi Pad 2/3.
5. L200 - Compatible with iPad 9.7" / iPad Air seires 9.7", Samsung Galaxy Tab S 10.5", Galaxy Tab S2 / S3 9.7", Galaxy Tab A 9.7", Galaxy Tab 4 9.7", HUAWEI M2 10.1", Asus ZenPad 3S 10.
Paul Moon | FocusPulling (.com) | On the art & technology of filmmaking
www.focuspulling.com | facebook.com/focuspulling | @focuspulling
Offline

ZeroPrime

  • Posts: 19
  • Joined: Thu Jun 06, 2019 10:27 am
  • Location: Uk
  • Real Name: Chris Barstow

Re: Monitor hood for BMPCC4k?

PostThu Jun 06, 2019 10:30 am

marcellomazzilli wrote:Designed my own with the help of a friend and we 3d printed it.
Go interchangeable bracket for naked camera, SmallRig cage etc


This is amazing and exactly what i'm after. Is there any chance you would be able to share the 3d print files? i have a friend that could print one, i really need to just attach to the BMCCP4K without a cage and this is ace!

Happy to send a few bucks your way for doing so!
Offline

XearoFury

  • Posts: 1
  • Joined: Thu Jun 06, 2019 3:39 pm
  • Real Name: John Mostin

Re: Monitor hood for BMPCC4k?

PostThu Jun 06, 2019 3:42 pm

marcellomazzilli wrote:Designed my own with the help of a friend and we 3d printed it.
Go interchangeable bracket for naked camera, SmallRig cage etc

Oh wow this is ace, please is it possible to get a link to the 3D print files?
Offline

John Griffin

  • Posts: 1335
  • Joined: Sun Aug 23, 2015 4:18 pm

Re: Monitor hood for BMPCC4k?

PostThu Jun 06, 2019 5:27 pm

Open hoods only protect against light striking dust to fingerprints on the and won't stop screen reflections. For that you need a loupe. I 3d printed one using the optics from a hoodman 3" loupe but it's very bulky and I no longer use it. I find the screen OK in bright sunlight when turned up to 100% brightness.

Return to Cinematography

Who is online

Users browsing this forum: Sean van Berlo and 76 guests