- Posts: 1
- Joined: Thu Mar 23, 2017 11:19 am
Thu Mar 23, 2017 11:27 am
Hi,
So was running a show converting the HDMI of the laptop over a Mini Converter HDMI to SDI.
There was a red in the presentation that would not display correctly. It appeared on screen (both projection and LED Screen) with horizontal lines of white through anything that was this exact colour red.
Swapped out the Black Magic box for a Kramer equivalent and this fixed it. As well applying a transparency layer to the slide in question, or slighty altering the red fixed the issue.
Running the latest firmware on the boxes. Anyone come across this before?
If I put the HDMI directly into a switcher then used converters to go from SDI to HDMI the issue was not present. It only occurs when using the HDMI to SDI which is a necessity to the show.
If anyone has any ideas would be great. I can get an image probably if necessary.
Thanks
So was running a show converting the HDMI of the laptop over a Mini Converter HDMI to SDI.
There was a red in the presentation that would not display correctly. It appeared on screen (both projection and LED Screen) with horizontal lines of white through anything that was this exact colour red.
Swapped out the Black Magic box for a Kramer equivalent and this fixed it. As well applying a transparency layer to the slide in question, or slighty altering the red fixed the issue.
Running the latest firmware on the boxes. Anyone come across this before?
If I put the HDMI directly into a switcher then used converters to go from SDI to HDMI the issue was not present. It only occurs when using the HDMI to SDI which is a necessity to the show.
If anyone has any ideas would be great. I can get an image probably if necessary.
Thanks