- Posts: 3
- Joined: Wed Dec 13, 2017 4:03 pm
Hi all,
I still don't have a clue why the Video Assist (2x, not the 4K version) doesn't support my SMPTE 259M-C.
The camera is outputting SMPTE 259M-C, so 525 lines/720 pixels /486 lines/59.94i.
According the brochure, the Video Assist should support 525i59.94 NTSC, 625i50 PAL.
If I connect it to several other monitors, the SDI is working as expected.
(E.g. TV Logic TDM 150W, TV Logic LVM 071W, Panasonic monitor, ...)
But the Video Assist doesn't show anything with it.
I tried also to program a Raspberry Pi to 480i mode, which works fine on a dell monitor.
However, if I connect it through HDMI to the video assist, then the output is lost as
soon as the raspberry PI downscales tot the 480i mode.
Can anybody tell me what the real support is of these Video Assist monitors in the SD modes?
Why doesn't the Video Assist show any output if I'm using SMPTE 259M-C?
According the specifications, it should be able to do so.
Greetings,
Henry Kompagnie.