Question regarding using multiple Audio Monitors.

Hello. I've just registered to ask this question. I haven't searched the forum yet, so please excuse my haste.

We already have one of the Audio Monitors (using SDI), and I absolutely love it. My question is: If I add in a second unit to listen to Ch 3&4, will the sound remain in sync with the existing unit, which is monitoring Ch 1&2? I really need to hear these four channels simultaneously, with no lag. I know I could add in an SDI to Audio de-embedder and listen to all four analog signals, but it would be more desirable to simply use a second Audio Monitor. Makes a cleaner install. Has anyone done this, and for this reason? Any info would be greatly appreciated, and Thanks eh. (Canadian here)

TL;DR: I want to listen to four channels of SDI embedded audio.

If you can live with a 50ns delay between the 2 units.. I guess your good to go

The 50ns is caused by the reclocker. As you loop trough the first device to the second one. But i guess you will not hear that 50ns..

Otherwise you have the hearing of a BAT.

Thanks very much sir. That's exactly what I was hoping to hear. I should go and prepare my Blackmagic shopping list. I also need another SmartScope Duo, another Teranex, and apparently an UltraStudio 4K. When did they drop the ability to capture from the Teranex?

Cheers.

If you can live with a 50ns delay between the 2 units.. I guess your good to go

The 50ns is caused by the reclocker. As you loop trough the first device to the second one. But i guess you will not hear that 50ns..

Otherwise you have the hearing of a BAT.

Since the Teranex 3D version..

The Hyperdeck Studio Pro also has a thunderbolt capture connection. But will only go up to 1080P30.. While the recorder does 2160P30.. So it seems they did not include the Thunderbolt option on the 12G gear.

I also do see now the older Teranex converters are removed and only the Teranex AV and Express are available.