Decklink via USB?

I’ve used all of my PCI-e slots in my PC, but wondering if there’s a way to configure an SDI out (Decklink or other) through a USB 3.0 port. Any suggestions?

If you have TB3 you might..
https://www.blackmagicdesign.com/produc ... /W-DLUS-10


But also thing about machine performance. You will max out somewhere that the PC will not run it smooth anymore..

And otherwise think about different decklink cards.. Like the Quad 2 cards.

Thanks! Unfortunately i dont have a TB3 port. My used PCI-e slots aren’t currently used for Decklink. It’s filled with a GTX 2070, 10Gb ethernet card, and UA audio card.

Then you need a bigger machine And core to support the ammount of lanes you need

I’ve used all of my PCI-e slots in my PC, but wondering if there’s a way to configure an SDI out (Decklink or other) through a USB 3.0 port. Any suggestions?

You have this:
https://www.blackmagicdesign.com/produc ... s/W-INT-02

HDMI up to 1080 60i only. Also- sometimes it can be picky depending on USB3 controller used in your machine.

There use to be:
https://www.bhphotovideo.com/c/product/ ... o_SDI.html

There use to be:
https://www.bhphotovideo.com/c/product/ ... o_SDI.html

I think this worked for me on one computer ever. Not a fan of the older USB 3.0 BMD stuff.

I’ve used all of my PCI-e slots in my PC, but wondering if there’s a way to configure an SDI out (Decklink or other) through a USB 3.0 port. Any suggestions?

You have this:
https://www.blackmagicdesign.com/produc ... s/W-INT-02

HDMI up to 1080 60i only. Also- sometimes it can be picky depending on USB3 controller used in your machine.

There use to be:
https://www.bhphotovideo.com/c/product/ ... o_SDI.html

Thanks. I’ll give the intensity shuttle a whirl.