Fusion Suggestions list

1. If you suddenly do not know, then in the Fusion in "Edit Controls" after changing the RGB keys, they do not display correctly and do not work. https://ibb.co/j6Wsdwn
2. By the way, why is the slider in the splines somehow strange displayed? https://ibb.co/CJrvpXY
3. Add an option in splines so that do not have to constantly press Ctrl + T.
4. Add a setting to keep the highlighted node (save selected node). Then I switched to "Edit", and then again to Fusion and the Last node stands out.
5. Add the ability to move composition by pressing a key. https://ibb.co/2ZYkrMk
6. Make the parameter "Show Only Selected Tool" remember so that when I turned it on it was always on at the project level.
Let's say we have a project 123. After enabling the parameter "Show Only Selected Tool" in all new and already created compositions this parameter must be enabled.
7. If I accidentally delete a composition, I need to be able to return the action by clicking Ctrl+Z. https://ibb.co/2ZYkrMk
8. Add the ability to invert keyframes (which now work by hotkey V) vertically and horizontally. https://ibb.co/vXPvbvM
9. Make that the position is maintained when switching the composition, and indeed after any switching. https://ibb.co/KxvD9TB
10. Why does the adjustment layer display such a large number of frames? Make it so that if I measured 30 frames, then in Fusion it would be displayed as 30 frames. Let it look at least outwardly like 30 frames, so as not to get confused. https://ibb.co/f2C7SQ3
11. In fusion, when I double-click on the text under the clips, it changes. Need to make it remember the choice at the project level or add an option to the settings to indicate which view suits me best. https://ibb.co/Fz8kGKy
12. And you can make it so that when I right-click on the clips at the top, I can choose how to display the clips. How now it’s normal but need to add and smaller icons. https://ibb.co/Fz8kGKy

Problems:
1. After the last two or three updates, Davinci often just closes. And almost always, when closing, an error appears with the words "Send an error report?" I completely deleted davinci and even folders in the system, reinstalled from scratch, but it did not help.
2. In Fusion when I press the Ctrl+Z
information is not updated. But as soon as I switch to another node and back, it is updated. I noticed this when working with key frames. And this appeared in the latest version of Davinci 16.1.1.005
3. If you replace the picture under the adjustment layer, it will not be updated. You have to change the proxy and then it will be updated.

1. I created a macro and when creating it indicated which controls I need.
2. Then I changed some controls and they look like this. https://ibb.co/6Rrs9wY https://ibb.co/Ry8jJFk
3. After the project was closed, everything was mixed up. https://ibb.co/0M5CRrK
If you disconnect the macro, then nothing will change. But if you delete, and then press Ctrl+Z, then the position will change again. https://ibb.co/Ry8jJFk
It would be cool to sort your buttons right in the inspector. For example, when you hold down some keys.

Look, let's say we have a Transform node. If you look at her control, then there you can find the line (blank). Why, after I change this "blank" and then restart the program, it disappears. I want to add this line (blank) to separate the controls, and for sorting I need to change it, but after that it disappears.

Make this toolbar not overlap the image, but shift it.

Add to Fusion the ability to see how much time it takes to load. Suppose I made a transition, and when I added additional effects, I want to know how much longer the download will take with a new effect.

Look, let's say in Fusion I have 2 transform nodes.
In two nodes I made changes. Why, when in the first (in the account) node I put Blend at 1, and in the second 0, then everything quickly shifts and everything works in the EDIT tab. But if in the first node I put Blend at 0, and in the second 1, then in Fusion
loading takes a long time, and in the EDIT tab does not play at all. Simply put, you need to make sure that when you set 0 to Blend, the information that has changed in the node should not be updated until Blend is again 1. And the information passing through the node with Blend 0 should simply pass through as if this node were not at all. Since I'm adding a few nodes now, in all I set Blend to 0, and the PC loads, as if all the nodes are turned on.

Add the ability to sort buttons, sliders, and more when creating a macro. So that you can add buttons after the change through the "Edits Controls" tab so that everything is displayed correctly and that the inputs do not go down after the change, but keep the position that I want. Also, so that there is a separate key for adding blank (partitions). Now I can’t sort the buttons and sliders normally, for this I need to know how to write macros, but you don’t have such information.

1. Need to add a hot key for the "Custom Scale"(So that I can specify a hotkey that I like.). BUT, do better that all settings are saved. So that any new project or current one keeps the Scale after the program closes. https://ibb.co/pXxj6nr
2. Please make it so that all these parameters are saved. Because now after creating the project, you need to reconfigure everything again, and this is an extra waste of time. https://ibb.co/0VfHXJV

Why doesn't your program read GIFs?

Proxy does not work. Nearly always i see this.

Hi, DaVinci what is it? How to fix it?

Don't you think it's boring to post the same thing 3 times?
Posting the same thing several times doesn't increase the quality of the content.
So please stop multiple postings.

Don't you think it's boring to post the same thing 3 times?
Posting the same thing several times doesn't increase the quality of the content.
So please stop multiple postings.

I don’t know where it’s better to publish so that the developers can see it, therefore I publish in two topics.

Don't you think it's boring to post the same thing 3 times?
Posting the same thing several times doesn't increase the quality of the content.
So please stop multiple postings.

I don’t know where it’s better to publish so that the developers can see it, therefore I publish in two topics.

The dev team, even if does not reply directly, read pretty much all the posts. (yes I regularly talk to them)

Your system is below recommended spec, you might have problem running the software that can show as (but no it limited to): not refreshing the cache, fusion glitches, GPU full and random crashes wrong persistent cache.

Don't you think it's boring to post the same thing 3 times?
Posting the same thing several times doesn't increase the quality of the content.
So please stop multiple postings.

I don’t know where it’s better to publish so that the developers can see it, therefore I publish in two topics.

The dev team, even if does not reply directly, read pretty much all the posts. (yes I regularly talk to them)

Your system is below recommended spec, you might have problem running the software that can show as (but no it limited to): not refreshing the cache, fusion glitches, GPU full and random crashes wrong persistent cache.

I would believe, but my friend has a laptop that meets the requirements of the program and has exactly the same problems. The problem is not in the equipment, but in the program.

Add to node dissolve more inputs. More Background and foreground. It is very necessary to create transitions.

Add a function for the adjustment layer, which will automatically stretch key frames. For example, we created an adjustment layer in a project of 30 frames, which has key frames at the beginning and at the end, when I drag it into a project from 30 frames to 60 frames, the key frames are automatically stretched.

Add the ability to create folders, sort them, and when adding an adjustment layer or transition, a file is created along the specified path.
C:\Program Files\Blackmagic Design\DaVinci Resolve\Fusion\Templates\Edit\Custom

Add a function for the adjustment layer, which will automatically stretch key frames. For example, we created an adjustment layer in a project of 30 frames, which has key frames at the beginning and at the end, when I drag it into a project from 30 frames to 60 frames, the key frames are automatically stretched.

This already exists, check keyframe stretcher node and modifier

Add a function for the adjustment layer, which will automatically stretch key frames. For example, we created an adjustment layer in a project of 30 frames, which has key frames at the beginning and at the end, when I drag it into a project from 30 frames to 60 frames, the key frames are automatically stretched.

This already exists, check keyframe stretcher node and modifier

thanks, I know now)

Add up to Fusion Transition the ability to limit the maximum and minimum length transition. For example
if you specify the value of 1 second, then when you try to stretch the transition, it does not stretch for more than 1 second.

If add a Transform node and select Mirror in the Edges, and add a Lens Distort node with Distort mode, add Distortion (0.5). Everything is rendered for a very long time, it’s very long straight. But if you specify a negative value in Quartic Distortion, for example, -0.01, then everything renders 10 times faster. Fix this problem.

In the Prismatic blur node in the version DaVinci_Resolve_16.2.1_Windows, a transparent line is very noticeable. With the Vortex node the same problem.

Why is the transition inserted between the video and not on top of the video? Can't be done normal? Why was it decided to do just that? If you use Fusion Templates and the adjustment layer for transitions, then the adjustment layer saves time several times, since you just place the adjustment layer on top of the video and everything works fine and quickly. But when we use Fusion Templates, it is something strange and inconvenient. Make the transition be on top of the video and not between the videos.

Please fix the DVE node. Motion Blur does not work correctly with Frame Render Script.

Fix the waviness node. All Controls on the Controls page are not working correctly.
wavinessType - does not contain min and max scale, but should be INP_MinScale = 0, INP_MaxScale = 1. When you add min and max scale and try to play, the program closes.
All other controls, when you try to change them through FrameRenderScript, are not visible or change.

Let's say I created keyframes for the Size parameter (Transform node). Then I added the keystretcher modifier to it. Make it so that when you delete a keystretcher, the keyframes of the Size parameter are returned as they were originally, and not deleted.

Do that all settings are saved. Because now nothing is saved, but is constantly reset to normal.

If you create keyframes, for example, the Size parameter, then copy them, then take a blank Transform node, open splines and paste frames, the program will close. Add maybe a message, "Add one keyframe to start, then paste the copied ones." or make that when inserting keyframes, first a frame is created and our keyframe is already laid on top of it.

Edge Detect node lost the second Blend in version 17.

There are a lot of such bug in version 17+
P.S. I installed version 16.1.1, the same thing happens there.

It pisses me off. From version 16 is still left. Even if the transition is selected and you click "Open on Fusion Page", very often it is not the transition that opens, but the layer below it.