Resolve 16 Beta Problems

  • Author
  • Message
Offline

Kerry Garrison

  • Posts: 80
  • Joined: Mon Aug 07, 2017 6:42 pm

Re: Resolve 16 Beta Problems

PostTue Apr 09, 2019 10:06 pm

I respectfully disagree, but all I'm really asking for is if somebody from BMD (or anybody) could guide me on what to do now? Is there a way to reset all preferences? Do I uninstall and reinstall? I'm worried about my license key not being deactivated if I just uninstall.

Here is what happens....You license is good for 2 installations. If you install a third one, it deactivates the first two. You can then go back and reactivate it on one of those machines. If you activate it again on a third system, the other two deactivate and so on, and so on. I use three machines and just keep my activation key handy to copy and paste on each machine. Its no big deal.
2016 MacBook Pro 13" - 2016 5k iMac - macOS Mojave
Offline

bstaley

  • Posts: 48
  • Joined: Tue Jan 15, 2019 1:26 pm
  • Real Name: Bill Staley

Re: Resolve 16 Beta Problems

PostTue Apr 09, 2019 10:14 pm

FYI, to anybody who might be having similar issues...

- I uninstalled 16.
- Reinstalled 16
- It still would not get past the splash screen.
- I uninstalled 16
- I installed 15.3
- It works again.

Thanks to those who offered advice and for the licensing information above. I think I'm going to stay on 15 until the "official" release of 16. The new features are cool, but at least now I can get some work done.
Linux Mint 19.2
AMD Threadripper 1950x w/ASRock x399 mobo
32GB RAM
nVidia GT 1080
All SSD
Resolve Studio 16
Online
User avatar

bobosola

  • Posts: 17
  • Joined: Wed Nov 28, 2018 10:09 pm
  • Location: Southampton UK
  • Real Name: Bob Osola

Re: Resolve 16 Beta Problems

PostTue Apr 09, 2019 11:30 pm

Tobias Becker wrote:Every Clip in my timeline that goes through Fusion in displayed as Media Offline

Similar problem with Fusion titles (e.g. Lower 3rd Simple Box 2 Line). All my projects were imported successfully to DR16 beta but all my imported Fusion titles just show the "Media Offline" graphic when in the Edit & Cut pages. The inspector show all the imported title properties OK (i.e. text, font etc.) and the titles render OK on the Fusion page. But they're not showing up in the Edit or Cut pages as per screenshot below.

Image

Update: I experimented with copying and pasting just one broken title adjacent to the broken one. The pasted version worked fine and somehow woke up all the others in the timeline too! So it's all good again now. Very odd!
Windows 10 Pro v1809 Novatech desktop PC, i5-4690K (3.50GHz 4 cores), 16GB DDR3 RAM, GA-H81M-DS2V motherboard, 11GB MSI NVidia GeForce GTX 1080 Ti. SSD for OS & apps, 4TB SATA for data.
Offline

Tom Roper

  • Posts: 51
  • Joined: Sat Apr 14, 2018 4:59 pm
  • Real Name: Tom Roper

Re: Resolve 16 Beta Problems

PostWed Apr 10, 2019 2:59 am

The wake up call (media offline), or green frames in the timeline are prior bugs that BMD have always fixed just prior to the end of a beta period, and I'm really excited to try V16 and the new Cut page, but I just can't chance it while I'm doing paid work. Please hurry!
Offline

Lonzoo

  • Posts: 1
  • Joined: Wed Apr 10, 2019 6:48 am
  • Real Name: Marcus Lorenz

Re: Resolve 16 Beta Problems

PostWed Apr 10, 2019 6:59 am

Resolve Studio 16 Beta problem (Windows): The new Clip View on the new Cut Page isn't working properly. Clip View shows the entire clip and some metadata which is great, but hovering the mouse pointer over the clip doesn't show the clip in the viewer, although Source Clip is selected there. Double clicking brings up the clip in the viewer but still, it shows the first frame only, hovering the mouse over the Clip View has no effect on what's shown in the viewer.
Offline

AbdoulUK

  • Posts: 145
  • Joined: Mon Mar 18, 2019 4:53 pm
  • Real Name: Abdoul Mohammad

Re: Resolve 16 Beta Problems

PostWed Apr 10, 2019 7:26 am

Hi, where is the proper place to send Blackmagic my crash reports for DR16? Thanks
Offline

Shrinivas Ramani

Blackmagic Design

  • Posts: 540
  • Joined: Wed Sep 20, 2017 10:19 am

Re: Resolve 16 Beta Problems

PostWed Apr 10, 2019 7:47 am

AbdoulUK wrote:Hi, where is the proper place to send Blackmagic my crash reports for DR16? Thanks


You can grab the appropriate log archive and post a link in this forum -
see the "Submitting diagnostics logs" section here for getting the archive, and posting additional information (hardware, step by step description of scenario) and depending on your issue, other useful contextual information like system info and exported project files.

You can also use the inbuilt crash reporter that you can enable here. In case of a crash, you can enter the description in the dialog that appears, and it will upload a copy of the log archive for analysis.
inbuilt crash reporter.png
inbuilt crash reporter.png (347.37 KiB) Viewed 9677 times
Offline
User avatar

Shredder777

  • Posts: 7
  • Joined: Wed Apr 10, 2019 10:21 am
  • Location: USA
  • Real Name: Sean Silas

Re: Resolve 16 Beta Problems

PostWed Apr 10, 2019 10:30 am

bstaley wrote:I'm having many problems so far. Upon launch it's telling me it cannot locate any CUDA devices and I should update my drivers. I never had this problem with 15.x. I updated to NVIDIA driver version 24.21.13.9924 from Windows Update and it's the same error.

I'm able to run the program using OpenCL, but I can't playback more than a few seconds of my timeline and I get the "GPU is full" error. I never had this error once on 15.x.

Is there a specific version of Nvidia driver I should be using? This is dated 9/5/18. I could get the latest from their website but I was under the impression performance was actually worse with the latest Nvidia drivers.


I am getting the same error and stayed up for hours trying to figure it out. I turned off the extra GPU acceleration they added and the moment I went to do particles in a 4k video I got the dreaded "GPU is Full" error.. I am thinking of going back to 15 until they figure this out. I do not have time to troubleshoot. I need to be learning this software. :)
Resolve 15.2.4 (NOW 16 Beta) | Windows 10 x64 (Latest Updates) | AMD Ryzen 7 2700X Eight-Core | 32GB | MSI NVIDIA Gforce GTX 1060 6GB
Resolve | Reason 10 | Photoshop | Affinity Designer | Lightroom
Offline

VladVP

  • Posts: 28
  • Joined: Fri Dec 14, 2018 12:23 pm
  • Real Name: Vladimir Potekhin

Re: Resolve 16 Beta Problems

PostWed Apr 10, 2019 12:23 pm

Hello.

I hope the PROGRAMMERS will see this post.

I switched from 16 back to 15. I'll let the link on my post WHY i did that a bit later. The context first.
- Part one viewtopic.php?f=21&t=77981#p496063
- and right there part two viewtopic.php?f=21&t=77981#p496071

Here's my post WHY i switched back viewtopic.php?f=21&t=77981&start=50

I use DR for ColorGrading and as NLE. And even though i have NVIDIA GeForce GTX1080Ti GPU, i'm really afraid that tilt to Fusion will not allow me to use any other version than DR15 (if it goes that way). Maybe not 15, maybe 16 - it's just a matter of time. And at the moment it is not workable as NLE at some points (this is my experience) and it doesn't fit professional standarts (if there are some:). If we'd speak about a car that wouldn't stop smooth anyone would agree it's not a professional approach at least (i think). Espesially if in the manual it'd be declared "smooth brake". And here's what i thought: what if you provide two versions of DR
1) The one WITH Fusion
2) The one WITHOUT Fusion.
Thus it'd become possible to improve them separatelly. Notice, i don't speak about making Fusion standalone (as it used to be). Yes, for those who need it it's convenient to have it in the package. But what about those who don't want it BY ANY MEANS? So i'm talking about two packages.

I understand that there will be a problem to switch from one to the other. But
1) you can make convertors (which in some you do anyway)
2) those, who really need Fusion can continue struggling since they want Fusion. But those, who don't need it that much would prefer to use just what they need.
And i don't know where will be the majority. Obviosly it'll depend upon how usable will be that or that particular version WITH Fusion. But at least we'd have the one without Fu but workable and upgratable - and no problem.

It looks everybody will be happy. At least as i see it.

Thank you.
Win10 64, Intel Core i7 7800x 3.50Gz, MSI x299 sli plus, 1 GPU NVIDIA GeForce GTX1080Ti, RAM32
Davinci Resolve 15.3.1.003 Studio
Tried 16 beta 1 - "GPU is full" all the time, switched back to 15.
2019.08.14 use both v15 and v16 Studio.
Offline

Claudio Portal

  • Posts: 1
  • Joined: Wed Apr 10, 2019 12:25 pm
  • Real Name: Claudio Portal

Re: Resolve 16 Beta Problems

PostWed Apr 10, 2019 12:53 pm

Hello Everyone, Any ideas on why upon launch DR16 it opens the project manager and when I open a project it crashes and shuts down? By the way I had not backed up my databases from free version DR15.3 unfortunately, so when I tried to downgrade back to 15.3 from DR16 I coundn't access my projects anymore.. I know it's a dumb thing not to do but the fact it's I didn't, and now I can't get to the project I was working on. Any tips would be much appreciated. Since I can't get to the old project, I decided to have a second go at DR16. As I said before I can see my projects on the project manager in DR16 but when I try to open one it crashes...Thanks in advance..
Lenovo ideapad Y700-15SK
Intel Core i7-6700 HQ
CPU @2.60GHz
RAM 32 GB
NVIDIA GEFORCE 960
WINDOWS 10-HOME
64 bit
Offline
User avatar

javier forza

  • Posts: 41
  • Joined: Wed Apr 10, 2019 12:34 pm
  • Location: Buenos Aires - Argentina
  • Real Name: javier forza

Re: Resolve 16 Beta Problems

PostWed Apr 10, 2019 1:12 pm

Hi everybody, where is the Fairlight Sound Library? Is it a link in the site? Thanks
Davinci Resolve - OSX - BMPCC 4k - TILTA - MOZA AIR 2 - Rokinon - Canon FD - Tascam Dr100 MK iii - RODE NTG 2 - Rode Micro Video - Manfrotto staffs and one Bike.
Offline

Duke Sweden

  • Posts: 151
  • Joined: Tue Apr 10, 2018 10:57 pm
  • Real Name: Duke Sweden

Re: Resolve 16 Beta Problems

PostWed Apr 10, 2019 1:58 pm

sean_nzl wrote:
sean_nzl wrote:hi, after having no issues at all with Dr14 or DR15 studio, I am having the same issues (GPU full). Going to step back to DR15 until 16 is out of beta and try again then.


for what it is worth, and in case it helps someone else, I updated my graphics card driver and tried again and in the limited testing I have done, haven't had any issues. touch wood.


Updated my GPU driver also. Fixed a few problems. Only 2 remain. GPU memory full error code. I've had this before and it went away as v.15 betas were released. Other problem, sometimes I can't switch from one page to another. Everything else works fine. I can even save, make adjustments on the page I'm on, etc. I just can't switch to another page. Nothing happens. Restart fixes it. Still....
Offline

treykaiser

  • Posts: 2
  • Joined: Tue Apr 09, 2019 5:14 pm
  • Real Name: trey kaiser

Re: Resolve 16 Beta Problems

PostWed Apr 10, 2019 2:43 pm

I confirmed the long thumbnail,source/preview window load times is exclusive to Amd Vegas 56 card when using Resolve 16.

I uninstalled Resolve 16 and loaded Resolve 15 which corrected the load times.

On my XP5 15 laptop(gtx 1050ti) I loaded Resolve 16 and it ran normally. No long time times.

Hopefully they fix the load time issue with AMD cards soon.

I also they offer the jog wheel separately and I dont need another keyboard but I'd love a nice heavy metal jog wheel with in/out and source/preview buttons.
Offline

Tom Roper

  • Posts: 51
  • Joined: Sat Apr 14, 2018 4:59 pm
  • Real Name: Tom Roper

Re: Resolve 16 Beta Problems

PostWed Apr 10, 2019 3:35 pm

Agree with Vladimir. An option in the preferences to have Fusion not load would seem helpful and not impact having it whenever it was desired.
Offline

Cyril Perrot-Botella

  • Posts: 20
  • Joined: Sat Sep 30, 2017 11:33 pm
  • Location: Montréal, Canada

Re: Resolve 16 Beta Problems

PostWed Apr 10, 2019 3:37 pm

Big bug with the qualifier in ACES, i'm on Pc
I have selected with the ''picker'' the green and why it's the purple on my qualifier ?
all the time is not the good color and it,s grey all the time in the viewer.
Attachments
Annotation 2019-04-10 112342.jpg
Annotation 2019-04-10 112342.jpg (255.68 KiB) Viewed 9607 times
Cyril Perrot-Botella
www.cyclopephotographie.com
Montréal QC Canada
Offline

jthammett

  • Posts: 1
  • Joined: Wed Apr 10, 2019 7:10 pm
  • Real Name: Justin Tyler Hammett

Re: Resolve 16 Beta Problems

PostWed Apr 10, 2019 7:11 pm

Cyril Perrot-Botella wrote:Big bug with the qualifier in ACES, i'm on Pc
I have selected with the ''picker'' the green and why it's the purple on my qualifier ?
all the time is not the good color and it,s grey all the time in the viewer.


I had the same problem yesterday, I had to unistall and reinstall 15 in order to get my work done.
Offline

Spencer Acoustics

  • Posts: 74
  • Joined: Sat Sep 01, 2018 6:40 pm
  • Location: Dallas, Texas
  • Real Name: Randy Spencer

Re: Resolve 16 Beta Problems

PostThu Apr 11, 2019 12:21 am

If I uninstall 16 and go back to 15 will 15 be able to edit the files started in 16?
Spencer Acoustics

P4K, Rokinon Cine DS lenses
Asus Deluxe x299 motherboard
Intel 7940X 14 core cpu
32GB ram
Samsung 970 EVO M.2 - programs
Samsung 960 EVO ssd - working files
4-4TB WD Blue - storage
EVGA FTW 1050TI 4GB
Windows 10
DR 16.1b3 Studio
Offline

Dilson Abraham

  • Posts: 108
  • Joined: Tue Sep 20, 2016 8:38 am

Re: Resolve 16 Beta Problems

PostThu Apr 11, 2019 4:14 am

The database for Davinci Resolve 16 is not backward compatible with previous versions. This is how it has been with all major version upgrades of Resolve in the past. The databases are usually not backward compatible as the structure of the database is upgraded.
macOS Catalina 10.15
Intel Core i7 7700K 4.2 Ghz | 64GB
Asrock Taichi Z270 | Sapphire Radeon Nitro+ RX 580 |
Samsung 28"
Dell UP2716D
BMD Resolve Studio 16.0.0.044 | BM Fusion Studio 16 | Decklink 4K Extreme | Desktop Video 11.4
Offline

VladVP

  • Posts: 28
  • Joined: Fri Dec 14, 2018 12:23 pm
  • Real Name: Vladimir Potekhin

Re: Resolve 16 Beta Problems

PostThu Apr 11, 2019 10:36 am

Spencer Acoustics wrote:If I uninstall 16 and go back to 15 will 15 be able to edit the files started in 16?

Maybe this will work
viewtopic.php?f=21&t=88853#p496104
And here's a way to try to have both 15 and 16 on one computer
Win10 64, Intel Core i7 7800x 3.50Gz, MSI x299 sli plus, 1 GPU NVIDIA GeForce GTX1080Ti, RAM32
Davinci Resolve 15.3.1.003 Studio
Tried 16 beta 1 - "GPU is full" all the time, switched back to 15.
2019.08.14 use both v15 and v16 Studio.
Offline

Trensharo

  • Posts: 276
  • Joined: Mon Jul 23, 2018 1:20 pm
  • Real Name: Nate Doucette

Re: Resolve 16 Beta Problems

PostThu Apr 11, 2019 12:59 pm

VladVP wrote:
Spencer Acoustics wrote:If I uninstall 16 and go back to 15 will 15 be able to edit the files started in 16?

Maybe this will work
viewtopic.php?f=21&t=88853#p496104
And here's a way to try to have both 15 and 16 on one computer

The answer to his question is NO. If he started the project in Resolve 16, you can't resume editing it in Resolve 15.

That video just tells you how to install both versions side by side, which is an unrelated matter.
Offline

RobertNegron

  • Posts: 15
  • Joined: Wed Jun 21, 2017 9:28 pm

Resolve 16 Beta Problems

PostThu Apr 11, 2019 2:26 pm

waveforms missing.png
waveforms missing.png (25.66 KiB) Viewed 9461 times
Waveform is missing on Resolve 16 only on the Edit Page. Both Waveform buttons are selected but I can’t get the one on top to be highlighted. Restart the program seems to solve the issue.

Supermicro 7049GP-TRT Workstation
Dual Xeon Gold 6136 3.0GHZ
128GB RAM
RTX 2080 GUI Card
2 RTX Titan GPU
Windows 10 Pro 1809
Last edited by RobertNegron on Thu Apr 11, 2019 2:33 pm, edited 2 times in total.
Offline

VladVP

  • Posts: 28
  • Joined: Fri Dec 14, 2018 12:23 pm
  • Real Name: Vladimir Potekhin

Re: Resolve 16 Beta Problems

PostThu Apr 11, 2019 2:28 pm

Trensharo wrote:
VladVP wrote:
Spencer Acoustics wrote:If I uninstall 16 and go back to 15 will 15 be able to edit the files started in 16?

Maybe this will work
viewtopic.php?f=21&t=88853#p496104
And here's a way to try to have both 15 and 16 on one computer

The answer to his question is NO. If he started the project in Resolve 16, you can't resume editing it in Resolve 15.

That video just tells you how to install both versions side by side, which is an unrelated matter.


As for video, i agree. If we talk about a particular case (when it's done the way it is done). But i'd like others to know, how it is possible to do in correct way.
But there was not video only in my reply. First i provided the link, that might be the way out. And if it happened to me i'd definitely try it.
Win10 64, Intel Core i7 7800x 3.50Gz, MSI x299 sli plus, 1 GPU NVIDIA GeForce GTX1080Ti, RAM32
Davinci Resolve 15.3.1.003 Studio
Tried 16 beta 1 - "GPU is full" all the time, switched back to 15.
2019.08.14 use both v15 and v16 Studio.
Offline

Trensharo

  • Posts: 276
  • Joined: Mon Jul 23, 2018 1:20 pm
  • Real Name: Nate Doucette

Re: Resolve 16 Beta Problems

PostThu Apr 11, 2019 2:35 pm

VladVP wrote:
Trensharo wrote:
VladVP wrote:[quote="Spencer Acoustics"]If I uninstall 16 and go back to 15 will 15 be able to edit the files started in 16?

Maybe this will work
https://forum.blackmagicdesign.com/view ... 53#p496104
And here's a way to try to have both 15 and 16 on one computer

The answer to his question is NO. If he started the project in Resolve 16, you can't resume editing it in Resolve 15.

That video just tells you how to install both versions side by side, which is an unrelated matter.


As for video, i agree. If we talk about a particular case (when it's done the way it is done). But i'd like others to know, how it is possible to do in correct way.
But there was not video only in my reply. First i provided the link, that might be the way out. And if it happened to me i'd definitely try it.[/quote]You can't start in a new version and downgrade. You can only upgrade.

Suggest not using Beta for projects that matter.

Sent from my SM-N960U using Tapatalk
Offline

Greg Pususta

  • Posts: 1
  • Joined: Thu Apr 11, 2019 1:55 pm
  • Real Name: Greg Pususta

Re: Resolve 16 Beta Problems

PostThu Apr 11, 2019 2:50 pm

First time on the forum and need some help. Let me start by saying I'm a 65 year old guy who is technically challenged. I was using DV15 just for my personal enjoyment for editing my drone images. When I downloaded 16 everything looked fine until I would try and open a project. As soon as it opened the window would close and I would get the "report error" box. This would happen every time so I uninstalled 16 and downloaded 15 again and now I get this. Any help would be appreciated.
Attachments
2019-04-11 DV 2.png
2019-04-11 DV 2.png (170.63 KiB) Viewed 9435 times
Offline

DouglasRogers

  • Posts: 68
  • Joined: Mon Feb 25, 2019 4:59 am
  • Location: USA
  • Real Name: Douglas Rogers

Re: Resolve 16 Beta Problems

PostThu Apr 11, 2019 2:57 pm

Claudio Portal wrote:Hello Everyone, Any ideas on why upon launch DR16 it opens the project manager and when I open a project it crashes and shuts down? By the way I had not backed up my databases from free version DR15.3 unfortunately, so when I tried to downgrade back to 15.3 from DR16 I coundn't access my projects anymore.. I know it's a dumb thing not to do but the fact it's I didn't, and now I can't get to the project I was working on. Any tips would be much appreciated. Since I can't get to the old project, I decided to have a second go at DR16. As I said before I can see my projects on the project manager in DR16 but when I try to open one it crashes...Thanks in advance.


Since you are using a Windows 10, check to see if you have restore points enabled in Windows. If so Windows should have made a restore point prior to installing Resolve 16. If you decide to restore, I advise to make a full backup of everything first.
Offline

xunile

  • Posts: 685
  • Joined: Mon Apr 23, 2018 5:21 am
  • Real Name: Eric Eisenmann

Re: Resolve 16 Beta Problems

PostThu Apr 11, 2019 6:03 pm

Greg Pususta wrote:First time on the forum and need some help. Let me start by saying I'm a 65 year old guy who is technically challenged. I was using DV15 just for my personal enjoyment for editing my drone images. When I downloaded 16 everything looked fine until I would try and open a project. As soon as it opened the window would close and I would get the "report error" box. This would happen every time so I uninstalled 16 and downloaded 15 again and now I get this. Any help would be appreciated.


When you installed 16, it upgraded your database, so you cannot use it when you uninstall 16 and reinstall 15. You should always backup your Resolve database before upgrading Resolve. If you didn't, you are probably out of luck. You will have to create a new database and start over again. Your Resolve 16 problem might have been a video driver issue. Can you list your specs of your system, OS, Processor, Video Card, amount of memory, etc.
Win 10 Home
Intel Core I7-7700HQ 32 GB 1 TB NVME SSD 1 TB SATA SSD
GTX-1060-6GB
Resolve 16.1 Final
Offline

Michael Parfit

  • Posts: 18
  • Joined: Thu Aug 14, 2014 4:58 am

Re: Resolve 16 Beta Problems

PostThu Apr 11, 2019 7:00 pm

For me DR 16 repeatedly hangs doing Quick Export. I have an 8-minute timeline with varied media, and it usually hangs about 75% of the way through the render. I have left it hanging as long as half an hour to make sure it's not just contemplating a difficult codec. I have tried both H264 and ProRes quick renders.

Mac Pro late 2013 (trash can) 6-core, 2 D700s, 32GB memory, OWC ThunderBay SoftRaid.
Attachments
DaVinci-Resolve-logs-20190411-115243.zip
log after hangs and then a successful render of same timeline on Deliver Page
(256.92 KiB) Downloaded 143 times
Offline

Tom Scollard

  • Posts: 25
  • Joined: Thu Aug 06, 2015 8:57 pm

Re: Resolve 16 Beta Problems

PostThu Apr 11, 2019 11:51 pm

Little glitch I found.
I use a Macbook pro 2018 laptop with an RX 580 EGPU. When the EGPU is plugged in i don't get any scopes unless i uncheck "Use GPU Scopes". When the EGPU is not plugged in everything works fine.

I tried all the combinations of Auto, Metal, Open CL etc and can't get any GPU powered scopes with the Egpu.
MacBook Pro 2018 15-inch, 32GB ram, i7, 560 4GB internal graphics
Sonnet EGPU with Radeon RX 580
OSX Mojave 10.14.4
Offline

BKolley

  • Posts: 10
  • Joined: Mon Feb 18, 2019 4:08 am
  • Real Name: Brian Kolley

Re: Resolve 16 Beta Problems

PostFri Apr 12, 2019 1:59 am

Resolve 16 so far running very well on my machine and the cut view is really great, but I have a few very minor issues:
1) Database import of my backup was fine, but when I opened a project, all of my Text+ clips were shown in a "Media Offline" state. I could select them and edit them in the inspector, they just wouldn't display in the viewer. The workaround I found was to select one, copy it, move the play head to the beginning of that text+ clip, and then paste it back on top of itself (replacing the copy on the timeline with the clipboard copy). Then the text reappeared in the viewer. I had to do this for every Text+ object in the timeline. No big deal for me since the project was small. Saving the project, closing it, and then re-opening it worked correctly and I only had to do the copy/past thing on every text+ object one time per project.

2) If I leave the windows taskbar displayed, the ribbon at the bottom with the various view selectors winds up on top of some of the controls, at least on the color view and there's no v-scroll to adjust the view. However, if I hide the windows taskbar, all views display properly.

Item 2 Update 4/18/2019: I learned that, under the workspace menu, I can turn off the navigation bar. When I do that, the views all work properly with the windows 10 task bar. However, if I turn the navigation bar back on, I have to switch windows task bar back to hide because the navigation bar will cover the controls on the bottom of the view.

3) I am getting a static noise in my monitor speaker every time I adjust any control. I just built my system last week, and did a clean install of windows and all drivers are up to date. Each increment of every control makes a low, but audible static sound. It's more of a minor annoyance than a real problem.

Item 3 Update 4/18/2019: This problem turned out to be ground loop noise in my audio channels on my PC likely from increased power usage by the GPU from Resolve 16's increased usage of the graphics card. The noise problem was solved by installing an audio isolator.

4) Just about every Fairlight effect that I've tried cuts off the bottom portion of the view when I pop it out into its own window, leaving many controls near the bottom of the window inaccessible. The window sizes are not adjustable and there are no vscroll bars to move the view to bring the obstructed controls into view. However, the copy of the effect in the inspector is fine, so I can make the adjustments there and see the result in the effect's window.

5) Fairlight Equalizer has an issue where if I put the #1 adjustment circle exactly on the center line, the eq acts as if I turned it off. If I Move it even the slightest amount off the center line, the eq curve is applied correctly. I did not notice this behavior when moving the #2, #3, and #4 adjustment circles.

So far, version 16 seems to be working very well for me. I have not had any of the GPU memory full issues reported by other users. I will update this post if I run into any more bugs.
Last edited by BKolley on Thu Apr 18, 2019 6:03 am, edited 2 times in total.
Win 10
Asus ROG STRIX X470F MB
Ryzen 7 2700X CPU
16 GB Hyper X Fury Black DDR4-3200Mhz Ram
Samsung 970 EVO+ 500GB V-NAND M.2 2280 PCIe NVMe 3.0 x4 SSD
Radeon RX-580, 8GB GPU
3 TB Seagate 7200 RPM HDD
1 TB WD 7200 RPM HDD
Davinci Resolve 16.0.08.017
Offline
User avatar

Mike Warren

  • Posts: 177
  • Joined: Thu Nov 23, 2017 2:28 am
  • Location: Cairns, Australia

Re: Resolve 16 Beta Problems

PostFri Apr 12, 2019 2:35 am

BKolley wrote:3) I am getting a static noise in my monitor speaker every time I adjust any control. I just built my system last week, and did a clean install of windows and all drivers are up to date. Each increment of every control makes a low, but audible static sound. It's more of a minor annoyance than a real problem.


I could be wrong, but from your description that sounds like a ground loop. To prove that try moving a window around the screen when nothing else is making any sound through your speakers.
Typically, this is the large currents being used by the graphics card creating noise on the audio ground.
Resolve Studio 16.1 - Fusion Studio 9.0.1 - Windows 10
Gigabyte GTX1080ti 11GB - AMD 1950X - 32GB 2400
Gigabyte X399 AORUS Gaming 7
Intensity Pro 4k
Offline

BKolley

  • Posts: 10
  • Joined: Mon Feb 18, 2019 4:08 am
  • Real Name: Brian Kolley

Re: Resolve 16 Beta Problems

PostFri Apr 12, 2019 3:00 am

Mike Warren wrote:I could be wrong, but from your description that sounds like a ground loop. To prove that try moving a window around the screen when nothing else is making any sound through your speakers.
Typically, this is the large currents being used by the graphics card creating noise on the audio ground.


You may be on to something there. It sounds exactly like a a ground loop, but the only time there's noise is when I adjust a control. I tried your idea and moved windows around, but there was no static. On the other hand, if I adjust the contrast control in the color view, or the gain color wheel, or any other control, only then do I hear the static. I did find, however, in the timeline view, that if I move the playhead to a new spot on the timeline by just left clicking in the playhead area, I do get an extended amount of static. Instead of getting a very short click-like burst per increment, I get a static buzz for several seconds. If I turn the monitor volume to zero, I don't hear it, so it's definitely static in the audio stream. I think you might be right, I might have a ground loop issue. Even though moving the window didn't produce any static, that may not stress the GPU enough for the current to increase significantly and maybe adjusting controls in Resolve stresses the GPU enough to make it audible. I'll look into that. Thanks!
Win 10
Asus ROG STRIX X470F MB
Ryzen 7 2700X CPU
16 GB Hyper X Fury Black DDR4-3200Mhz Ram
Samsung 970 EVO+ 500GB V-NAND M.2 2280 PCIe NVMe 3.0 x4 SSD
Radeon RX-580, 8GB GPU
3 TB Seagate 7200 RPM HDD
1 TB WD 7200 RPM HDD
Davinci Resolve 16.0.08.017
Offline
User avatar

Mike Warren

  • Posts: 177
  • Joined: Thu Nov 23, 2017 2:28 am
  • Location: Cairns, Australia

Re: Resolve 16 Beta Problems

PostFri Apr 12, 2019 3:12 am

BKolley wrote:I did find, however, in the timeline view, that if I move the playhead to a new spot on the timeline by just left clicking in the playhead area, I do get an extended amount of static. Instead of getting a very short click-like burst per increment, I get a static buzz for several seconds.


I've seen ground loops show noise from hard drives before too.

Can you explain what your audio hardware path is? Are you using an external audio interface, internal interface or just motherboard audio?

In my current setup I initially had a ground loop, but was able to eliminate it by running balanced cables from my Presonus Studio 192 interface to my powered monitor speakers.
Resolve Studio 16.1 - Fusion Studio 9.0.1 - Windows 10
Gigabyte GTX1080ti 11GB - AMD 1950X - 32GB 2400
Gigabyte X399 AORUS Gaming 7
Intensity Pro 4k
Offline

BKolley

  • Posts: 10
  • Joined: Mon Feb 18, 2019 4:08 am
  • Real Name: Brian Kolley

Re: Resolve 16 Beta Problems

PostFri Apr 12, 2019 3:19 am

Mike Warren wrote:
BKolley wrote:I did find, however, in the timeline view, that if I move the playhead to a new spot on the timeline by just left clicking in the playhead area, I do get an extended amount of static. Instead of getting a very short click-like burst per increment, I get a static buzz for several seconds.


I've seen ground loops show noise from hard drives before too.

Can you explain what your audio hardware path is? Are you using an external audio interface, internal interface or just motherboard audio?

In my current setup I initially had a ground loop, but was able to eliminate it by running balanced cables from my Presonus Studio 192 interface to my powered monitor speakers.


Motherboard audio. I have 2 el-cheapo 32" TV's that I got for free with our new beds that I'm using as monitors and they only support 720P over hdmi, but they have a VGA input and an audio input, so I'm using display port to VGA adapters to run the monitors, and then the motherboard audio to pipe sound to one of the monitors. I had Resolve 15 running with no issues. The static didn't start until I loaded Resolve 16. However, I suspect you're right.
Win 10
Asus ROG STRIX X470F MB
Ryzen 7 2700X CPU
16 GB Hyper X Fury Black DDR4-3200Mhz Ram
Samsung 970 EVO+ 500GB V-NAND M.2 2280 PCIe NVMe 3.0 x4 SSD
Radeon RX-580, 8GB GPU
3 TB Seagate 7200 RPM HDD
1 TB WD 7200 RPM HDD
Davinci Resolve 16.0.08.017
Offline
User avatar

Mike Warren

  • Posts: 177
  • Joined: Thu Nov 23, 2017 2:28 am
  • Location: Cairns, Australia

Re: Resolve 16 Beta Problems

PostFri Apr 12, 2019 3:28 am

BKolley wrote:Motherboard audio.


Motherboard audio is notorious for showing any noise in a system. In the past I've even had to resort to adding power supply filtering to the onboard audio chip.

You could try an audio ground loop isolator, but I don't hold high hopes for it to cure your problem.
Resolve Studio 16.1 - Fusion Studio 9.0.1 - Windows 10
Gigabyte GTX1080ti 11GB - AMD 1950X - 32GB 2400
Gigabyte X399 AORUS Gaming 7
Intensity Pro 4k
Offline

BKolley

  • Posts: 10
  • Joined: Mon Feb 18, 2019 4:08 am
  • Real Name: Brian Kolley

Re: Resolve 16 Beta Problems

PostFri Apr 12, 2019 3:33 am

Mike Warren wrote:Motherboard audio is notorious for showing any noise in a system. In the past I've even had to resort to adding power supply filtering to the onboard audio chip.

You could try an audio ground loop isolator, but I don't hold high hopes for it to cure your problem.

Well, at least I have a direction to follow up with now, so thanks for the advice!
Win 10
Asus ROG STRIX X470F MB
Ryzen 7 2700X CPU
16 GB Hyper X Fury Black DDR4-3200Mhz Ram
Samsung 970 EVO+ 500GB V-NAND M.2 2280 PCIe NVMe 3.0 x4 SSD
Radeon RX-580, 8GB GPU
3 TB Seagate 7200 RPM HDD
1 TB WD 7200 RPM HDD
Davinci Resolve 16.0.08.017
Offline

conceptvbs

  • Posts: 36
  • Joined: Wed Dec 05, 2018 3:31 pm
  • Real Name: Peter Kim

New Bug?

PostFri Apr 12, 2019 4:27 am

I'm able to see hidden folders in the Import Media dialog box in the Cut Tab even though I have the "show hidden folders disabled" in the folder option menu in Windows 10.
Offline

gukmar

  • Posts: 1
  • Joined: Fri Apr 12, 2019 6:29 am
  • Real Name: Gianluca Ukmar

Re: Resolve 16 Beta Problems

PostFri Apr 12, 2019 6:50 am

Dear All,

I am new in the forum and I hope you will forgive me if I am not using the correct 3d.

I recently upgraded from Davinci Resolve 15.3 to 16 Beta and I think I was not that intelligent to backup my Sound Library PostgreSQL before to do so.
In few words my Sound library, that it's stored in a secondary drive, disappeared from Fairlight page. I tied to add again the library but the it says that "no data found".
Any of you have a clue on how to bring back the library?
P.S. I am on PC
Thank you in advance, regards
Gianluca
Offline

Pavel Rybakov

  • Posts: 90
  • Joined: Mon Apr 27, 2015 7:47 pm
  • Location: Kazan, Russia

Re: Resolve 16 Beta Problems

PostFri Apr 12, 2019 2:07 pm

So guys, does somebody have issues with playback speed of Optical Flow / Enhanced Better? Works real-time in DR15 but gives only 5-10 fps in DR16b...(((
https://vimeo.com/nrggroup
...and sorry for my english =)
ASUS GL504GS laptop with Corei7 8750 & GeForce 1070, SSD Toshiba 512 NVMe + SSD Samsung 850 EVO 1 TB
Offline

Oli Koos

  • Posts: 187
  • Joined: Thu Apr 30, 2015 10:29 am

Re: Resolve 16 Beta Problems

PostFri Apr 12, 2019 2:34 pm

Hi,

Here are some consistency problems I have with the beta:

- Make Zoom shortcuts persistent over the different pages. At the moment in the Edit/Color page it is cmd + mouse wheel while in Fusion it is ctrl + mouse wheel. That makes no sense.

- Edit Page has a blade icon to cut, while Fairlight has a scissor. (why?) (in cut page it has yet again a another name (cut) and icon, so three different icons and three different names for the same tool!

- In Fusion some (if not all the new) effects do not show up in the effect library, while they do in the shift space search bar. Also, why not also integrate a search function in the effect library as it is the case in the Edit and Color page.

- Fusion, please bring back the picon-images for the effects that used to be in Fusion standalone 9, makes it so much easier for a new user to get to know what the effects do

- Edit, please bring back the contextual duplicate timeline function (right-click on a timeline clip in the media pool, timeline - duplicate timeline (plenty of space there and it will not confuse anybody).

- color page, please bring the fabulous spline editor from Fusion to the color page. The color page keyframes need some real love. You can not do any splines, as you can do in the Edit or Fusion page, and this is again inconsistent.

- Edit Page, Text tool, do we still need both? Maybe make the old text tool only available in the options by checking, "enable legacy text tool"

- As a personal opinion, I would not activate the Cut page on default while this page is still in such an early stage. Curious users could still activate it in the workspace - show page menu.

- The Cut page could fill up an entire forum topic, but I think Bins should also be consistent as it is in the Edit Page. At the moment it does actually slow us down if we do want to use a Bin workflow in the Cut page.

- the elastic wave function does not show the keyframes for me.

v16 is a good build, great work as always, but it could use some more consistency.
Offline

Reynaud Venter

  • Posts: 1275
  • Joined: Sun May 28, 2017 9:34 am

Re: Resolve 16 Beta Problems

PostFri Apr 12, 2019 2:48 pm

Oli Koos wrote:- Make Zoom shortcuts persistent over the different pages. At the moment in the Edit/Color page it is cmd + mouse wheel while in Fusion it is ctrl + mouse wheel. That makes no sense.
Remap this to a custom keybinding - brings the desired consistency.

- Edit Page has a blade icon to cut, while Fairlight has a scissor. (why?) (in cut page it has yet again a another name (cut) and icon, so three different icons and three different names for the same tool!
This is a little odd. Then again, I never touch the Toolbar, as keybindings are used exclusively.

- the elastic wave function does not show the keyframes for me.
On macOS, Command + click over the Clip to place Bend Points at the location of the mouse pointer.

Hold the Command key over a Bend Point to display an arrow cursor, and drag the mouse left or right to nudge the contents of the Clip under the Bend Point.

ElasticWave.gif
ElasticWave.gif (100.1 KiB) Viewed 9238 times


Without the Command key, the Bend Point will be moved.

ElasticWaving.gif
ElasticWaving.gif (136.31 KiB) Viewed 9238 times
Offline

Irakly Shanidze

  • Posts: 91
  • Joined: Fri May 26, 2017 8:56 pm
  • Location: USA

Re: Resolve 16 Beta Problems

PostFri Apr 12, 2019 4:25 pm

I have just encountered a strange bug: waveforms disappeared on the Color page. I mean, the scopes panel is there, but it is empty. When opening scopes in Edit window, waveform shows up.

This weird thing happens on my Trashcan Mac Pro, but installation on MacBook Pro 2017 is fine.


Maybe I am simply missing something? Haven't seen anything like that since I started with Ver. 12.0
Leica SL/BM Video Assist 4K, Panasonic Lumix DC-S1
DaVinci Resolve Studio 16
Mac Pro 6,1 6-core 3.5GHz • 32GB RAM • Dual AMD FirePro D700
Sonnet Breakaway Box 550 • PowerColor Radeon RX Vega 64
Offline
User avatar

javier forza

  • Posts: 41
  • Joined: Wed Apr 10, 2019 12:34 pm
  • Location: Buenos Aires - Argentina
  • Real Name: javier forza

Re: Resolve 16 Beta Problems

PostFri Apr 12, 2019 4:26 pm

- Fairlight: copy and paste attributes to other clips - using FX Reverb2 - quit the program.
- Put Reverb2 to off silence all the ttacks. Only work when is deleted completely.
- I cannot find the 1000 Sounds library added ( I made this before, sorry)
- EDIT page timeline and Fairlight is not very intuitive in some sizes. Sometimes you have to do too much zoom for tool appear in the clip borders.
- .XML export not connect all the clips in other Resolve in other computer with same files.
- Delivery: sometimes make the marker in and out not work. Even play. Smetimes yes.
- Color works perfect ;)

(Opinion)
- CUT: Media Managment should include export the project file in easy way for open the project in other computer with all the files linked. Even if you are not a Pro - like CUT was created - and deliver a project for a colorist, for example. Database way is complex for huge projects.
- Quick Export should have size options. Full HD is the only one for h264.
- FUSION preview nodes (basic) - names are difficult to recognize.
- (Minor) Some functions should be an option in the project settings or properties to maintaine clean the interface. Too much information.

Thank you! :D
Davinci Resolve - OSX - BMPCC 4k - TILTA - MOZA AIR 2 - Rokinon - Canon FD - Tascam Dr100 MK iii - RODE NTG 2 - Rode Micro Video - Manfrotto staffs and one Bike.
Offline

Pavel Rybakov

  • Posts: 90
  • Joined: Mon Apr 27, 2015 7:47 pm
  • Location: Kazan, Russia

Re: Resolve 16 Beta Problems

PostFri Apr 12, 2019 4:57 pm

Option to turn off CUT page will be awesome. I don't need it for now, but in confuse me)
https://vimeo.com/nrggroup
...and sorry for my english =)
ASUS GL504GS laptop with Corei7 8750 & GeForce 1070, SSD Toshiba 512 NVMe + SSD Samsung 850 EVO 1 TB
Offline

Irakly Shanidze

  • Posts: 91
  • Joined: Fri May 26, 2017 8:56 pm
  • Location: USA

Re: Resolve 16 Beta Problems

PostFri Apr 12, 2019 5:07 pm

Irakly Shanidze wrote:Maybe I am simply missing something? Haven't seen anything like that since I started with Ver. 12.0


I just figured it out. There is a new checkbox in Preferences: "Use GPU Scopes" selected by default. Whatever it means, Parade panel had populated as soon as I unselected the checkbox.
Leica SL/BM Video Assist 4K, Panasonic Lumix DC-S1
DaVinci Resolve Studio 16
Mac Pro 6,1 6-core 3.5GHz • 32GB RAM • Dual AMD FirePro D700
Sonnet Breakaway Box 550 • PowerColor Radeon RX Vega 64
Offline

northcreative

  • Posts: 23
  • Joined: Mon Apr 30, 2018 4:32 pm
  • Real Name: Andrew Satinoff

Re: Resolve 16 Beta Problems

PostFri Apr 12, 2019 5:17 pm

Using 29.97 sequence within a 23.98 project... playback is stuttering and the monitoring is constantly flipping between 23.98 and 59.94i - especially on some transitions (push).
Offline

Tom Early

  • Posts: 1120
  • Joined: Wed Jul 17, 2013 11:01 am

Re: Resolve 16 Beta Problems

PostFri Apr 12, 2019 5:17 pm

Oli Koos wrote:Hi,

Here are some consistency problems I have with the beta:

- Make Zoom shortcuts persistent over the different pages. At the moment in the Edit/Color page it is cmd + mouse wheel while in Fusion it is ctrl + mouse wheel. That makes no sense.

- Edit Page has a blade icon to cut, while Fairlight has a scissor. (why?) (in cut page it has yet again a another name (cut) and icon, so three different icons and three different names for the same tool!

- In Fusion some (if not all the new) effects do not show up in the effect library, while they do in the shift space search bar. Also, why not also integrate a search function in the effect library as it is the case in the Edit and Color page.

- Fusion, please bring back the picon-images for the effects that used to be in Fusion standalone 9, makes it so much easier for a new user to get to know what the effects do

- Edit, please bring back the contextual duplicate timeline function (right-click on a timeline clip in the media pool, timeline - duplicate timeline (plenty of space there and it will not confuse anybody).

- color page, please bring the fabulous spline editor from Fusion to the color page. The color page keyframes need some real love. You can not do any splines, as you can do in the Edit or Fusion page, and this is again inconsistent.

- Edit Page, Text tool, do we still need both? Maybe make the old text tool only available in the options by checking, "enable legacy text tool"

- As a personal opinion, I would not activate the Cut page on default while this page is still in such an early stage. Curious users could still activate it in the workspace - show page menu.

- The Cut page could fill up an entire forum topic, but I think Bins should also be consistent as it is in the Edit Page. At the moment it does actually slow us down if we do want to use a Bin workflow in the Cut page.

- the elastic wave function does not show the keyframes for me.

v16 is a good build, great work as always, but it could use some more consistency.



this is the 3rd time you've posted this now...
MBP2016, MacOS 10.14.5, 2.9 GHz Intel Core i7, 16 GB 2133 MHz LPDDR3,
Radeon Pro 460 4096 MB, Resolve Studio 16.1.0B.033
Offline

xunile

  • Posts: 685
  • Joined: Mon Apr 23, 2018 5:21 am
  • Real Name: Eric Eisenmann

Re: Resolve 16 Beta Problems

PostFri Apr 12, 2019 5:28 pm

javier forza wrote:- Fairlight: copy and paste attributes to other clips - using FX Reverb2 - quit the program.
- Put Reverb2 to off silence all the ttacks. Only work when is deleted completely.
- I cannot find the 1000 Sounds library added ( I made this before, sorry)
- EDIT page timeline and Fairlight is not very intuitive in some sizes. Sometimes you have to do too much zoom for tool appear in the clip borders.
- .XML export not connect all the clips in other Resolve in other computer with same files.
- Delivery: sometimes make the marker in and out not work. Even play. Smetimes yes.
- Color works perfect ;)

(Opinion)
- CUT: Media Managment should include export the project file in easy way for open the project in other computer with all the files linked. Even if you are not a Pro - like CUT was created - and deliver a project for a colorist, for example. Database way is complex for huge projects.
- Quick Export should have size options. Full HD is the only one for h264.
- FUSION preview nodes (basic) - names are difficult to recognize.
- (Minor) Some functions should be an option in the project settings or properties to maintaine clean the interface. Too much information.

Thank you! :D


You can create custom render profiles for use in Quick Export.
Win 10 Home
Intel Core I7-7700HQ 32 GB 1 TB NVME SSD 1 TB SATA SSD
GTX-1060-6GB
Resolve 16.1 Final
Offline

Oli Koos

  • Posts: 187
  • Joined: Thu Apr 30, 2015 10:29 am

Re: Resolve 16 Beta Problems

PostFri Apr 12, 2019 6:05 pm

Tom Early wrote:
Oli Koos wrote:Hi,
Here are some consistency problems ...

this is the 3rd time you've posted this now...


True, and I apologize for this. I wish Blackmagic would have a Bug tracker like Github and co to see if a bug or feature request is acknowledged. Here in the forum, one does not know if our input just vanished into the void, unread by the developers.


@Reynaud Venter, thanks for the elastic wave tip. It worked.
Offline

VioletWolf

  • Posts: 139
  • Joined: Wed Feb 20, 2019 5:23 am
  • Location: Canada
  • Real Name: Rick Welin

Re: Resolve 16 Beta Problems

PostFri Apr 12, 2019 6:27 pm

BKolley wrote:Motherboard audio. I have 2 el-cheapo 32" TV's that I got for free with our new beds that I'm using as monitors and they only support 720P over hdmi, but they have a VGA input and an audio input, so I'm using display port to VGA adapters to run the monitors, and then the motherboard audio to pipe sound to one of the monitors. I had Resolve 15 running with no issues. The static didn't start until I loaded Resolve 16. However, I suspect you're right.


GROUND ISSUES causing speaker noise: I've had similar issues with two computers over the years that took forever to troubleshoot.

SOLUTION: I cut the ground prong off my computers plug. Fixed instantly.

Filtered power did not work.

Note: I do know that it's there for safety. I've been into electronics for 40 years. You're only touching your computer through your keyboard and mouse (isolated from mains) and the motherboard and all internal components run off stepped-down current so the chances of any high current shorts are extremely low.

You could at least temporarily disconnect the ground plug for a test if you don't want to do it permanently
Resolve 16.1 Release | Windows 10 x64 (Latest Updates) | AMD 9590 - 5ghz 8 Core | 24GB | MSI NVIDIA RTX 2070 8 Gig
Refugee from Adobe Premiere / After Effects
Offline

BKolley

  • Posts: 10
  • Joined: Mon Feb 18, 2019 4:08 am
  • Real Name: Brian Kolley

Re: Resolve 16 Beta Problems

PostFri Apr 12, 2019 6:53 pm

VioletWolf wrote:GROUND ISSUES causing speaker noise: I've had similar issues with two computers over the years that took forever to troubleshoot.

SOLUTION: I cut the ground prong off my computers plug. Fixed instantly.

Filtered power did not work.

My case is designed with a fold down side panel to which the motherboard is attached. While that makes it easy to access the motherboard, the panel isn't hinged in an electrically conductive way nor is it properly bonded to the rest of the case. Consequently, the motherboard bonding screws are, in essence, bonding the motherboard to a floating metal panel, and since the power supply is bonded to the case proper, that's a potential source of ground noise. I intend to bond the mobo panel to the case with a dedicated bonding conductor to see if that helps reduce or eliminate the noise. I also have an old ungrounded outlet adapter that I can use to do what you're suggesting. Lastly, I have an audio ground isolator coming that should be delivered this weekend. Hopefully, one of those will resolve the issue, otherwise, I'll just continue to troubleshoot it. Thanks for the info!
Win 10
Asus ROG STRIX X470F MB
Ryzen 7 2700X CPU
16 GB Hyper X Fury Black DDR4-3200Mhz Ram
Samsung 970 EVO+ 500GB V-NAND M.2 2280 PCIe NVMe 3.0 x4 SSD
Radeon RX-580, 8GB GPU
3 TB Seagate 7200 RPM HDD
1 TB WD 7200 RPM HDD
Davinci Resolve 16.0.08.017
PreviousNext

Return to DaVinci Resolve Beta Feedback

Who is online

Users browsing this forum: MSN [Bot] and 8 guests