Cannot see my keyframes

  • Author
  • Message
Offline

ogcine

  • Posts: 3
  • Joined: Sun Jul 21, 2019 11:08 pm
  • Real Name: OSCAR EMILIO GALVAO

Cannot see my keyframes

PostSun Jul 21, 2019 11:19 pm

I cannot see the keyframes dots I create. The changes take effect in the edit page, but I can´t see the dots. Not in the color page keyfrane timeline, not in the edit page. Can´t see them for correction, effects or transitions. Please help
Offline

Harold Tomlinson

  • Posts: 113
  • Joined: Sun Sep 14, 2014 9:58 pm

Re: Cannot see my keyframes

PostMon Jul 22, 2019 9:23 pm

I think that you are correct. When you do the keyframes on the edit page, you will not see them. I would love to have a keyframe editor there, but this is what I have figured out so far: (Hopefully someone can tell us a better way.)

You can change the keyframes on the edit page by using the Next and Previous icons that are on either side of the dot. If the dot is white, you are not on a key frame, Click on the next or previous and it will turn red and the play head will move to where the keyframe is. You can 'delete' it by clicking a red keyframe so that it turns white or just adjust the settings. I believe you can also right-click on the adjustment and select items from a menu that let you delete or set keyframes for the adjustment and/or for the set of adjustments (for example, x, y, and z offsets can be keyframes together by right-clicking above the x adjustment).
---
DR16b7/Fusion Studio 16 build 45
iMac Pro 2017 - 2.3GHz 18 Core 64GB
- Radeon Pro Vega 64 16GB + Radeon VII 16GB
Pocket Cinema 4k - Panasonic GH5s - Panasonic GH4 - GoPro Hero 7 Black
vimeo.com/haroldtomlinson
creacom.smugmug.com
Offline

Peter Cave

  • Posts: 1346
  • Joined: Thu Aug 23, 2012 6:45 am
  • Location: Melbourne, Australia

Re: Cannot see my keyframes

PostTue Jul 23, 2019 1:26 am

I'll just leave this here and recommend the User Manual as a source of information.

Screen Shot 2019-07-23 at 11.24.37 am.png
Screen Shot 2019-07-23 at 11.24.37 am.png (438.24 KiB) Viewed 126 times
Resolve 15.3 & 16.0
Mac OSX 10.13.6
Hackintosh i7 32gb
GTX 1060 6GB
Offline
User avatar

Marc Wielage

  • Posts: 5783
  • Joined: Fri Oct 18, 2013 2:46 am
  • Location: Hollywood, USA

Re: Cannot see my keyframes

PostTue Jul 23, 2019 3:26 am

Peter Cave wrote:I'll just leave this here and recommend the User Manual as a source of information.

It's been asked before that a start keyframe and an end keyframe have different colors, and then maybe they'd be easier to distinguish (particularly on a complicated position curve). So far, that hasn't happened.
marc wielage, csi • VP/color & workflow • chroma | hollywood
Offline

Harold Tomlinson

  • Posts: 113
  • Joined: Sun Sep 14, 2014 9:58 pm

Re: Cannot see my keyframes

PostTue Jul 23, 2019 3:31 am

Thanks for leaving that image Peter. I was able to figure out what needed to be done from it.

It was still hard to find the information in the manual. I did find Chapter 28 on "Using Transition Curves" but that was not it. It referenced "clicking the Curve Editor button" so I searched for that. (A glossary, index, and or a icon description table would help a lot.)

While looking for that I came across Chapter 36 which has the answer to the original poster's question about the keyframes. To the original poster: see the section "Keyframing Effects in the Edit Page" for a description and a picture of the "Keyframe button".
---
DR16b7/Fusion Studio 16 build 45
iMac Pro 2017 - 2.3GHz 18 Core 64GB
- Radeon Pro Vega 64 16GB + Radeon VII 16GB
Pocket Cinema 4k - Panasonic GH5s - Panasonic GH4 - GoPro Hero 7 Black
vimeo.com/haroldtomlinson
creacom.smugmug.com
Offline

ogcine

  • Posts: 3
  • Joined: Sun Jul 21, 2019 11:08 pm
  • Real Name: OSCAR EMILIO GALVAO

Re: Cannot see my keyframes

PostTue Jul 23, 2019 11:51 am

Thank you all very much for the prompt response. I had figured out the keyframes on the edit page. However, my main problem is on the color page. The keyframes do no appear on the keyframe timeline for the clip. In every tutorial I watch, all it takes is to click on any diamond of any parameter on the inspector and a mark (or diamond, if you will) will automatically appear on the timeline. That is not happening. As I scrolll through the timeline and reach a point where there is a keyframe, the button on the inspector turns red to let me know there is a keyframe there, but it is not visible as it was on DR15 and in every tutorial I watch. Thank you again for the attention.
Offline
User avatar

Dwaine Maggart

Blackmagic Design

  • Posts: 5388
  • Joined: Wed Aug 22, 2012 2:53 pm

Re: Cannot see my keyframes

PostTue Jul 23, 2019 10:19 pm

Edit page Inspector dynamics do not appear on the Color page keyframe list. This is the same in 15 and 16.

if you are referring to something different, a screen shot or 2 may be helpful.
Dwaine Maggart
Blackmagic Design DaVinci Support
Offline

Peter Cave

  • Posts: 1346
  • Joined: Thu Aug 23, 2012 6:45 am
  • Location: Melbourne, Australia

Re: Cannot see my keyframes

PostWed Jul 24, 2019 4:56 am

ogcine wrote:Thank you all very much for the prompt response. I had figured out the keyframes on the edit page. However, my main problem is on the color page. The keyframes do no appear on the keyframe timeline for the clip. In every tutorial I watch, all it takes is to click on any diamond of any parameter on the inspector and a mark (or diamond, if you will) will automatically appear on the timeline. That is not happening. As I scrolll through the timeline and reach a point where there is a keyframe, the button on the inspector turns red to let me know there is a keyframe there, but it is not visible as it was on DR15 and in every tutorial I watch. Thank you again for the attention.


To summarise: Edit Page keyframes and Colour Page keyframes are completely independent from each other. Colour Page keyframes only appear in the Colour Page keyframe panel.
Resolve 15.3 & 16.0
Mac OSX 10.13.6
Hackintosh i7 32gb
GTX 1060 6GB
Offline

ogcine

  • Posts: 3
  • Joined: Sun Jul 21, 2019 11:08 pm
  • Real Name: OSCAR EMILIO GALVAO

Re: Cannot see my keyframes

PostMon Jul 29, 2019 1:25 am

I cannot figure this out. I have seeked help on YT but to no success. This youtuber from John's Films tried helping me. I created a video showing him my problem. If someone could please take a look and help, I would appreciate it.

Return to DaVinci Resolve Beta Feedback

Who is online

Users browsing this forum: RCModelReviews and 5 guests