No HDMI output Display From ATEM TO LED

Questions about ATEM Switchers, Camera Converter and everything live!
  • Author
  • Message
Offline

Ahsan Saeed

  • Posts: 40
  • Joined: Thu Dec 31, 2015 12:53 pm

No HDMI output Display From ATEM TO LED

PostSun Jun 18, 2017 11:31 pm

I have just got 24inch LED TV and connect it with ATEM HDMI Output but its not showing any signals on LED but if i use SDI-HDMI Converter and then give HDMI signal to the LED it shows the signal. Please can anyone help me out why i can't see direct HDMI signal from ATEM


Sent from my iPhone using Tapatalk
Offline
User avatar

Xtreemtec

  • Posts: 1357
  • Joined: Wed Jan 02, 2013 11:48 am
  • Location: The Netherlands

Re: No HDMI output Display From ATEM TO LED

PostTue Jun 27, 2017 9:14 am

Your monitor is not complaint with the resolution / framerate that you try to push over the HDMI directly.. Or your HDMI output is defective.. Did you try a different monitor??
What resolution are you running your atem?
What type of monitor are you trying to connect?
Daniel Wittenaar .:: Xtreemtec Media Productions ::. -= www.xtreemtec.nl =-
4K OBV, ATEM TVS HD, Production Studio 4K, 2M/E Broadcast Studio 4K, Hyperdeck Studio, SONY FS7 4K, JVC HM700 Full HD Camera
Offline

Ahsan Saeed

  • Posts: 40
  • Joined: Thu Dec 31, 2015 12:53 pm

Re: No HDMI output Display From ATEM TO LED

PostTue Jun 27, 2017 5:34 pm

On my other monitor of 32inches i can easily output the hdmi signal but not on my 24inch monitor. I am currently using 1080i on my ATEM


Sent from my iPhone using Tapatalk
Offline

Ahsan Saeed

  • Posts: 40
  • Joined: Thu Dec 31, 2015 12:53 pm

Re: No HDMI output Display From ATEM TO LED

PostTue Jun 27, 2017 5:36 pm

If i connect my camera directly to this monitor with the same setting as 1080i it gives the signal but not with the ATEM or huyperdeck. Is there any fix ?


Sent from my iPhone using Tapatalk
Offline
User avatar

Xtreemtec

  • Posts: 1357
  • Joined: Wed Jan 02, 2013 11:48 am
  • Location: The Netherlands

Re: No HDMI output Display From ATEM TO LED

PostTue Jun 27, 2017 7:59 pm

What brand and type monitor are we talking about????

There could be a mismatch between EDID or HDMI key's
Daniel Wittenaar .:: Xtreemtec Media Productions ::. -= www.xtreemtec.nl =-
4K OBV, ATEM TVS HD, Production Studio 4K, 2M/E Broadcast Studio 4K, Hyperdeck Studio, SONY FS7 4K, JVC HM700 Full HD Camera
Offline

Ahsan Saeed

  • Posts: 40
  • Joined: Thu Dec 31, 2015 12:53 pm

Re: No HDMI output Display From ATEM TO LED

PostWed Jun 28, 2017 9:01 am

Its a a Local brand LED ..so is there anything i should try to get the signal on the led or you are suggesting there is no hope


Sent from my iPhone using Tapatalk
Offline
User avatar

Xtreemtec

  • Posts: 1357
  • Joined: Wed Jan 02, 2013 11:48 am
  • Location: The Netherlands

Re: No HDMI output Display From ATEM TO LED

PostWed Jun 28, 2017 3:22 pm

Well if it was a Samsung Sony or other very well known brand i would start looking to the atem, cables and stuff.. But a no name brand it could be easily not complaint to all HDMI resolutions / framerates..
Daniel Wittenaar .:: Xtreemtec Media Productions ::. -= www.xtreemtec.nl =-
4K OBV, ATEM TVS HD, Production Studio 4K, 2M/E Broadcast Studio 4K, Hyperdeck Studio, SONY FS7 4K, JVC HM700 Full HD Camera

Return to Live Production

Who is online

Users browsing this forum: Andy Coulthurst and 15 guests