- Posts: 1
- Joined: Tue Sep 22, 2020 11:13 pm
- Real Name: Bonita Taitt
Tue Sep 22, 2020 11:34 pm
Good day,
My church is using a Canon XA11 and a Canon XA20 with mini-HDMI to HDMI output to connect to the ATEM Mini, then broadcast through vMix for livestreaming. When I first connected everything, the cameras worked well with the ATEM Mini to vMix. However, I had to upgrade the graphics card to a GTX 1050TI and since them our cameras have been flickering in vMix. At first I thought it was a vMix issue, and one of their forums suggested removing the GE Force Experience and I did, but I have the issue. So I used a cheap video graphics card, and sent the video image into vMix, and had no flickering. However, when I run the HDMI cable back into the ATEM Mini, the camera image flickers again in each HDMI port. I have tried switching the cables for the webcam out (starting with USB-C to USB 2.0 then USB-C to USB 3.0, and it still flickers. What can I do to stop the flickering?
My church is using a Canon XA11 and a Canon XA20 with mini-HDMI to HDMI output to connect to the ATEM Mini, then broadcast through vMix for livestreaming. When I first connected everything, the cameras worked well with the ATEM Mini to vMix. However, I had to upgrade the graphics card to a GTX 1050TI and since them our cameras have been flickering in vMix. At first I thought it was a vMix issue, and one of their forums suggested removing the GE Force Experience and I did, but I have the issue. So I used a cheap video graphics card, and sent the video image into vMix, and had no flickering. However, when I run the HDMI cable back into the ATEM Mini, the camera image flickers again in each HDMI port. I have tried switching the cables for the webcam out (starting with USB-C to USB 2.0 then USB-C to USB 3.0, and it still flickers. What can I do to stop the flickering?