Multiview and Input burned

Hi All (Sorry for Crosposting - atemuser an here..)

I have a ATEM TVS and something very odd has happened. I do write to try finding similar experiences around the situation.
We had a electrical busrt coming from a Audio signal thorough a Atlona Scaler and a lot of things had burned (Ths scaler itself, the Multiview HDMI Monitor) . The ATem TVS now has the Multiview output (both HDMI and SDI) and the HDMI inout 1 also damaged.
So, my question is: Was not that supposed to burn All the hardware instead of just the multiview strip and input channel ?
HAs someone experienced something alike ?

Thanks in advance

Hello,
I have a ATEM M/E1 Firmware 3.3 and this week something like you has happened.
HDMI IN 1 and Multiview HDMI out : out of work !

After reboot 4 times, every thing OK.

Now, the multiview is OK but HDMI 1 is unstable with Matrox MXO2 Mini...
Good luck !