- Posts: 1
- Joined: Sat Dec 01, 2012 2:26 am
Sat Dec 01, 2012 2:44 am
I am running ATEM TVS on PAL mode with firmware version 3.4 and need to input HDMI input from Laptop.
I could input from laptop by setting resolution 720x576 and refresh rate 50.0 but the input on TVS flickers heavily. My laptop is Acer Aspire One 522 and same resolution + refresh rate setup to a DataVideo TLM-700HD monitor is displayed without any problem.
Hoping that my Laptop is causing problem, I input another HDMI at 720x576@50Hz obtained from a Set Top Box and although flickering was not noticeable, colors seems to wrong on TVS while same was displayed without any problem on .
DataVideo TLM-700HD monitor.
What could be wrong with my setup.
I could input from laptop by setting resolution 720x576 and refresh rate 50.0 but the input on TVS flickers heavily. My laptop is Acer Aspire One 522 and same resolution + refresh rate setup to a DataVideo TLM-700HD monitor is displayed without any problem.
Hoping that my Laptop is causing problem, I input another HDMI at 720x576@50Hz obtained from a Set Top Box and although flickering was not noticeable, colors seems to wrong on TVS while same was displayed without any problem on .
DataVideo TLM-700HD monitor.
What could be wrong with my setup.