Atem 1-me 4k doesn't see Propresenter

Im using atem production 4k 1-me switcher with Imac with decklink 4k Extreme card in exspansion box with thunderbolt to Imac.I have my cams going to switcher inputs SDI and SDI program out to decklink 4k extreme input,also A and B outputs of 4k extreme to 9 and 10 input on switcher and running PP6 on Imac testing Alpha key module.PP see's the 4k extreme when I go and test live video on PP but get nothing on PP output window. In the DSK on the atem I tried 9 and 10 for key and fill but get no results.I have usb from Imac to switcher also. I have read all the info on PP and dont know what else to try.I can see cams on multiview and wirecast.

Are you running the PP SDI Module? I understand, and from my trials, it will not output to a SDI (and then only approved) device.

In Demo I am

Must make sure your outputting the same resolution as what your ME is set to. You set the resolution in Pro P under the new SDI tab in preferences. Make sure its set the same (i.e. 1080p59.94) then it should show up.

Everything is at 1080i 60