rca connections

hi i have blackmagic tv atem studioand a camera that only have rca output i want to know if blackmagic have a solution to connect that camera (rca output) to the tv atem studio.... and if there is a solition to connect the atem to a rca input.

thanks...............................

You would need to get a analog composite to HDMI converter, TV one It vs 622 would do the conversion Then you need to get a Hdmi Digital to analog output converter Like the Atlona hd 530

Sharyn

Here's a few cheaper options
http://www.bhphotovideo.com/c/product/7 ... _with.html
http://www.bhphotovideo.com/c/product/8 ... tereo.html

A question to the Atlona scaler :

Output Resolution 1024 X 768 (XGA), 1280 X 1024 (SXGA), 1600 X 1200 (UXGA) (computer display output only supports 60hz)
480p, 576p (50 hz only), 720p, 1080p HDTV 50 / 60 hz compatible

what about 1080i ...?

two question please.....

1.. rca y an analog connection? is there a converter to rca to analog?? i am confused



2. i want to connect rca to the sdi input of tv atem studio.... whta can i do?

1.) RCA is an analog connection (mostly used by amateurs) with identical electrical parameters like the BNC connector (mostly used by professionals). So a simple mechanical convertion is necessary to "convert" RCA to BNC.

2.) When you want to connect an analog camera to ATEM, you will need a converter e.g.
- the Atlona AT-HD120 (see above) which converts analog RCA to HDMI
- the Blackmagic Analog to SDI-Converter, which converts analong BNC to digital/SDI-BNC. Here you need an adaptor CRA to BNC, when using with a camera with RCA connevtion.

When you wish to conncect by SDI, you have to use the "analog to SDI converter".