Resolution of multi-view from ATEM TV Studio HD
Posted:
Thu May 18, 2017 2:45 pmby Mark Forrer
Im presuming 1080p or is it only 720P?
Re: Resolution of multi-view from ATEM TV Studio HD
Posted:
Mon May 22, 2017 3:23 pmby Gary Colon
Mark Forrer wrote:Im presuming 1080p or is it only 720P?
You can set it to multiple resolutions but nothing below 1080 unfortunately.
Re: Resolution of multi-view from ATEM TV Studio HD
Posted:
Mon May 22, 2017 4:54 pmby Gary Adams
Hello Mark. The Multiview output for the TVS HD will be an HD resolution matching the switcher standard. If the switcher is set to SD then the MV will be 1080p. If the switcher is set to 720p, then the MV will be 720p. With the high frame rates, there will be some options to use 1080i or 1080p. Except for Standard Definition, the multiview will generally be the same as the switcher resolution. Hope this helps.
Regards, Gary
Re: Resolution of multi-view from ATEM TV Studio HD
Posted:
Sat May 11, 2019 6:39 pmby Chawpmaster
dose production studio 4k allow for the multi resolution?