- Posts: 3
- Joined: Sun Jun 18, 2017 11:09 am
Hello Gianna. There are two SDI outputs on the Hyperdeck Studio Mini. Output one would be the Fill signal and connect to any SDI input on the ATEM. Output two would be the Key signal and would connect to another SDI input on the ATEM. In the keyer setup on the ATEM, set the Fill source to the input with the Fill source and the Key Source to the input with the Key signal. The playback file must be ProRes 4444 and no higher than 1080p59.94.
Regards, Gary