Hyperdeck Studio Mini - HDMI Output Problem

Questions about ATEM Switchers, Camera Converter and everything live!
  • Author
  • Message
Offline

Bill Severance

  • Posts: 1
  • Joined: Thu Jun 29, 2017 11:04 pm
  • Location: Bridgton, Maine

Hyperdeck Studio Mini - HDMI Output Problem

PostFri Jun 30, 2017 12:08 am

Just received our Hyperdeck Studio Mini which will be paired with ATEM TVS HD as soon as it is received and 3 PTZ SDI cameras for recording municipal meetings. In checking out the Hyperdeck I was not able to display video via the HDMI output connected to an ASUS VE248H 1080p monitor. The monitor continually showed "Out of Range". I tried two other 1080p computer monitors with either the same error message or a black screen. Connecting the Hyperdeck HDMI output via the same HDMI cable to a 1080p television worked fine. So I'm wondering . . .

1. What is the resolution and frame rate of the Hyperdeck HDMI output? The television showed it to be 1080p as expected but could not tell if frame rate was 30 or 60.
2. Can the Hyperdeck HDMI output resolution and frame rate be changed? Is it fixed or does it follow the SDI input signal which was 1080p30.
3. Probably not related but I could not record with a 1080p60 SDI input from camera. The LCD screen on the Hyperdeck showed only the top part of the input video compressed vertically to about 1/3 height and then repeated on a second "row" about 1/3 height and the final 1/3 height of the screen black.

Thanks for any suggestions!
Bill Severance, Technical Advisor
Lake Region Television
PEG Access Serving 11 Maine Communities
Offline

rogersuski

  • Posts: 74
  • Joined: Wed Aug 29, 2012 12:37 am

Re: Hyperdeck Studio Mini - HDMI Output Problem

PostTue Aug 08, 2017 2:56 am

Have you received your switcher yet? Can you record program with your HDMini? I'm finding that the units will not accept a signal without embedded audio ie) raw camera feed through router to HDMini is no good, same source routed through switcher is joyful.
Offline

Denny Smith

  • Posts: 6582
  • Joined: Thu Aug 01, 2013 4:19 pm
  • Location: USA, Northern Calif.

Re: Hyperdeck Studio Mini - HDMI Output Problem

PostThu Aug 10, 2017 5:28 pm

Bill, The Hyperdeck Mini, as all of the BM Video recorders, output resolution matches the inoutted signal resolution, not up/down or cross scaling. So if you input 1080p30, you will get 1080p30 out.
Cheers
Denny Smith
SHA Productions

Return to Live Production

Who is online

Users browsing this forum: Bing [Bot] and 7 guests