DJI to Atem Television Studio 1

Hi I have the following problem
1 - my English is very bad
2 - I have a Dji 4 with the HDMI module and I have the Atem 1 set to 1080 when I connect the dron in the atem I can not see because the output of the module is 720 when I setup the atem in 720 if I see but my cameras do not need to upload the image from 720 to 1080 ask in B & H and I did not answer or did not understand my question I do not need something economical.
Thank you

Some source will need a scaler to convert either from 720 to 1080 or 1080 to 720. You'll probably want to look at something like a Decimator MD-HX. http://decimator.com/Products/MiniConve ... MD-HX.html

[quote="Benjamin Higginbotham"]Some source will need a scaler to convert either from 720 to 1080 or 1080 to 720. You'll probably want to look at something like a Decimator MD-HX.

If I seen it but it is a lot for what I need I do not think that I take out 100% of what it is I would like to know another that is something cheaper here in my country would be coming out the same product in US 542.46 if there was something more economical I would appreciate it

Good hardware Costs money. And the MD-HX is the cheapest and most relaiable option you have. There is no magic box that does it all for just 100 dollars.