- Posts: 71
- Joined: Thu May 22, 2014 4:19 pm
YES
YES
YES
NO!
With the mini converters to fiber you just change from copper to fiber and back.. So the signal on these units stay the same.. As they are not alterd in any way by the converters.
The Atem TVS HD Has talkback, Tally and shading data embedded in the SDI outputs. So if you connect the fiber converters right at both ends with dual SDI leads you would have all these options..
Using network SFP's is not recommended.. They use an error correction which will fail at certain sdi signal flows.. Here is why>> viewtopic.php?f=4&t=49172&p=323070&hilit=pathelogical+pattern#p289398
Just buy the 3G-SDI sfp's from BMD and you are good and safe to go