new CCU Control surface for ATEM available

Questions about ATEM Switchers, Camera Converter and everything live!
  • Author
  • Message
Offline
User avatar

Baz

  • Posts: 443
  • Joined: Wed Aug 22, 2012 5:06 am
  • Location: Sydney, Australia

new CCU Control surface for ATEM available

PostSun Sep 17, 2017 1:27 am

Recently I completed a FOUR camera Control surface for any ATEM Production Switcher as there were not many available.
This one has the ability to control ALL the available ATEM CCU functions on any of the available camera's.
Its called a 4xCCU Basic Controller. The word 'basic' means it has minimal knobs, buttons and indicators but it is FAR from basic in what it can do.

The 4xCCU Basic Controller is especially useful if you are using Blackmagic Studio/Micro camera's with B4 lenses and my B4 lens controllers. I also have controllers for some other camera's but most of my video's are based around the BMD solutions.

Here are some video's of the 4xCCU Basic Controller's functionally....


4xCCU Basic CONTROLLER INTRODUCTION



4xCCU Basic CONTROLLER ADVANCED MODE



4xCCU Basic CONTROLLER PAINT MODE



4xCCU Basic CONTROLLER CCU MONITORING


For further information see -
http://www.lefflerpost.com.au/CCU/
Last edited by Baz on Thu Sep 28, 2017 12:31 am, edited 1 time in total.

MISC
U/S Express, SmartviewDuo, SmartScopeDuo, Teranex 2D, Web Pres, 5/7 Vid Assists
VIDEOHUB
Smart 12x12
12x24
72x144
HYPERDECK
Studio, Shuttle, Studio Mini
ATEM
2me4K, 2me, TVS, TVS HD, CamConvs, StudioConvs, Studio Cams, Micro Studio Cam
Offline
User avatar

Baz

  • Posts: 443
  • Joined: Wed Aug 22, 2012 5:06 am
  • Location: Sydney, Australia

NOW with VIDEOHUB control

PostThu Sep 28, 2017 12:26 am


MISC
U/S Express, SmartviewDuo, SmartScopeDuo, Teranex 2D, Web Pres, 5/7 Vid Assists
VIDEOHUB
Smart 12x12
12x24
72x144
HYPERDECK
Studio, Shuttle, Studio Mini
ATEM
2me4K, 2me, TVS, TVS HD, CamConvs, StudioConvs, Studio Cams, Micro Studio Cam
Offline
User avatar

Baz

  • Posts: 443
  • Joined: Wed Aug 22, 2012 5:06 am
  • Location: Sydney, Australia

NOW with SmartScope control

PostWed Oct 04, 2017 6:31 am


MISC
U/S Express, SmartviewDuo, SmartScopeDuo, Teranex 2D, Web Pres, 5/7 Vid Assists
VIDEOHUB
Smart 12x12
12x24
72x144
HYPERDECK
Studio, Shuttle, Studio Mini
ATEM
2me4K, 2me, TVS, TVS HD, CamConvs, StudioConvs, Studio Cams, Micro Studio Cam
Offline
User avatar

Baz

  • Posts: 443
  • Joined: Wed Aug 22, 2012 5:06 am
  • Location: Sydney, Australia

Re: new CCU Control surface for ATEM available

PostThu Oct 19, 2017 1:36 am

NOW with touchscreen control!

Image

With the optional touchscreen you can view all the CCU settings as well as adjust all the parameters including setup items, other CCU items like gain, shutter, zoom, focus etc.

The touchscreen display also offers discrete control of any Videohub AND ATEM AUX busses not to mention a SmartScope.

There will be a demo video posted shortly.

Baz

MISC
U/S Express, SmartviewDuo, SmartScopeDuo, Teranex 2D, Web Pres, 5/7 Vid Assists
VIDEOHUB
Smart 12x12
12x24
72x144
HYPERDECK
Studio, Shuttle, Studio Mini
ATEM
2me4K, 2me, TVS, TVS HD, CamConvs, StudioConvs, Studio Cams, Micro Studio Cam
Offline
User avatar

Baz

  • Posts: 443
  • Joined: Wed Aug 22, 2012 5:06 am
  • Location: Sydney, Australia

4xCCU Control surface with MULTIVIEW 4

PostWed Oct 25, 2017 9:12 am


MISC
U/S Express, SmartviewDuo, SmartScopeDuo, Teranex 2D, Web Pres, 5/7 Vid Assists
VIDEOHUB
Smart 12x12
12x24
72x144
HYPERDECK
Studio, Shuttle, Studio Mini
ATEM
2me4K, 2me, TVS, TVS HD, CamConvs, StudioConvs, Studio Cams, Micro Studio Cam
Offline
User avatar

Baz

  • Posts: 443
  • Joined: Wed Aug 22, 2012 5:06 am
  • Location: Sydney, Australia

Not just a full featured 4 camera CCU controller but .....

PostMon Oct 30, 2017 1:07 pm

This video shows how you can use the 4xCCU Controller with the optional touch screen to adjust the SmartScope Duo 4K parameters for each of the 2 monitors including:
• Display type
- Waveform
- Picture
- Vector 100
-Vector 75
- Parade RGB
- Parade YUV
- Histogram
- Audio Dbfs
- Audio Dbvu
• Audio channel
• Brightness
• Contrast
• Saturation

It also shows how you can use the 4xCCU Controller to control any AUX buss of an ATEM and any output buss of a Videohub using both 'hot cut' or 'take' mode.

Another 1 take wonder!



baz

MISC
U/S Express, SmartviewDuo, SmartScopeDuo, Teranex 2D, Web Pres, 5/7 Vid Assists
VIDEOHUB
Smart 12x12
12x24
72x144
HYPERDECK
Studio, Shuttle, Studio Mini
ATEM
2me4K, 2me, TVS, TVS HD, CamConvs, StudioConvs, Studio Cams, Micro Studio Cam
Offline
User avatar

Baz

  • Posts: 443
  • Joined: Wed Aug 22, 2012 5:06 am
  • Location: Sydney, Australia

4xCCU Load/Save settings

PostSat Nov 04, 2017 3:58 am

This video shows how you can load and save each of the four camera settings on the 4xCCU controller using the Touch Screen display.
The Load/save can also be used for copying all or selected settings from 1 CCU position to another all at the same time.



http://bazcontrollers.com/

MISC
U/S Express, SmartviewDuo, SmartScopeDuo, Teranex 2D, Web Pres, 5/7 Vid Assists
VIDEOHUB
Smart 12x12
12x24
72x144
HYPERDECK
Studio, Shuttle, Studio Mini
ATEM
2me4K, 2me, TVS, TVS HD, CamConvs, StudioConvs, Studio Cams, Micro Studio Cam
Offline
User avatar

Baz

  • Posts: 443
  • Joined: Wed Aug 22, 2012 5:06 am
  • Location: Sydney, Australia

Re: new CCU Control surface for ATEM available

PostMon Nov 13, 2017 6:44 am

I have added an extra function to the Load/save menu that allows saving and loading of the configuration settings.




I have also made a video on the touch screen overview.



.... and for those who like a mystery.....


MISC
U/S Express, SmartviewDuo, SmartScopeDuo, Teranex 2D, Web Pres, 5/7 Vid Assists
VIDEOHUB
Smart 12x12
12x24
72x144
HYPERDECK
Studio, Shuttle, Studio Mini
ATEM
2me4K, 2me, TVS, TVS HD, CamConvs, StudioConvs, Studio Cams, Micro Studio Cam
Offline

Sam Cole

  • Posts: 22
  • Joined: Tue Dec 22, 2015 10:13 pm

Re: new CCU Control surface for ATEM available

PostWed Nov 15, 2017 5:01 am

I just found the USERS Guide on line!

http://bazcontrollers.com/4xCCUuserguide.pdf

I want one... :o

Return to Live Production

Who is online

Users browsing this forum: No registered users and 13 guests