Problems using Input/Output

Questions about ATEM Switchers, Camera Converter and everything live!
  • Author
  • Message
Offline

DaniloEscobar

  • Posts: 3
  • Joined: Fri Oct 20, 2017 9:24 pm

Problems using Input/Output

PostFri Oct 20, 2017 9:50 pm

Hi! Everyone, i have a problem, i don´t know if is about driver or other thing.

I´m using a software called Vmix and my card declink sdi 4k, when i use the output sdi port on vmix sending a video on the software, it works. But, when i try to put a camera (inputsdi port on card)at the same time that I am sending the video through the output following message appears.


AddNewInput
Selected Video Format is not supported by this device: bmdModePAL
Acesso negado. (Exceção de HRESULT: 0x80070005 (E_ACCESSDENIED))

PS: When i stop output on the software, the input works.


Im using on the software
OUTPUT: Decklink sdi1
INPUT: Blackmagic WDM Capture or Decklink Video Capture
Offline
User avatar

Xtreemtec

  • Posts: 5391
  • Joined: Wed Jan 02, 2013 11:48 am
  • Location: The Netherlands

Re: Problems using Input/Output

PostSat Oct 21, 2017 4:26 pm

Normally i don't use card with in and output at the same time.. And i do think that is not possible also ;)

If you need more input or outputs you need to add more cards..

Or add a Decklink Duo2 or quad card toget more ports.
Daniel Wittenaar .:: Xtreemtec Media Productions ::. -= www.xtreemtec.nl =-
4K OBV Trailer, ATEM TVS HD, 4M/E Broadcast Studio 4K, Constelation 8K, Hyperdeck Studio 12G, Ursa Broadcast 4K, 4K fiber converters with Sony Control
Offline

Andrew Martin

  • Posts: 465
  • Joined: Sat Jul 08, 2017 9:25 pm

Re: Problems using Input/Output

PostTue Oct 24, 2017 7:05 pm

I'd side with Daniel as I also
believe the single channel decklink cards are in or out and never both at the same time.
As an input device the out becomes a throughput copy of the input signal
As an output device it is just that, an output.

You'll need a decklink duo or quad to use as switchable in and outs

A.
Offline

DaniloEscobar

  • Posts: 3
  • Joined: Fri Oct 20, 2017 9:24 pm

Re: Problems using Input/Output

PostSat Oct 28, 2017 2:47 am

No, it´s Work, i got another decklink sdi 4k and work.

one cable in output and another in input, and i was able to play what comes from the input to the output.

The problem is the another card i have
Offline
User avatar

Xtreemtec

  • Posts: 5391
  • Joined: Wed Jan 02, 2013 11:48 am
  • Location: The Netherlands

Re: Problems using Input/Output

PostMon Oct 30, 2017 7:50 pm

DaniloEscobar wrote:one cable in output and another in input, and i was able to play what comes from the input to the output.

Were you also be able to play out something else then the input?? Because normally the output is a loop trough from the input ;)
Daniel Wittenaar .:: Xtreemtec Media Productions ::. -= www.xtreemtec.nl =-
4K OBV Trailer, ATEM TVS HD, 4M/E Broadcast Studio 4K, Constelation 8K, Hyperdeck Studio 12G, Ursa Broadcast 4K, 4K fiber converters with Sony Control
Offline

DaniloEscobar

  • Posts: 3
  • Joined: Fri Oct 20, 2017 9:24 pm

Re: Problems using Input/Output

PostTue Oct 31, 2017 1:57 pm

yes it works by passing a different video on the output. But my another card decklink its smaller then a new card and the older is different, don´t show on windows decklink sdi 4k, its appears decklink sdi only

Return to Live Production

Who is online

Users browsing this forum: No registered users and 56 guests