1080p to 1080i converter

Questions about ATEM Switchers, Camera Converter and everything live!
  • Author
  • Message
Offline

John Bouchet

  • Posts: 1
  • Joined: Sat Nov 11, 2017 5:35 pm

1080p to 1080i converter

PostSat Nov 11, 2017 5:39 pm

Hello, i'm looking for a cheap converter to use my Fuji XT-2 (only 1080p not 1080i) with my ATEM Television Studio and my others camera all in 1080i

Can you help ?

The only solution i try and works, is to put the Fuji in a Roland V1HD (an other mixer) and this one concert my 1080p signal to a 1080i signal...

Can you help me ? hope that perhaps the ATEM Television Studio firmware can make that we can use 1080p AND 1080i signal at the same time like the roland....

Thank you
Offline

Andrew Martin

  • Posts: 74
  • Joined: Sat Jul 08, 2017 9:25 pm

Re: 1080p to 1080i converter

PostMon Nov 13, 2017 10:45 pm

For a converter I think the BMD up/down/cross will do it
Or if you move away from BMD the decimators MD-HX.


John Bouchet wrote: ? hope that perhaps the ATEM Television Studio firmware can make that we can use 1080p AND 1080i signal at the same time like the roland....
Thank you


No too late for that, it'll never happen... The TVS is already superceded by the TVS HD and I can't see BMD devoting time and resources to it for quite a serious update as you are hoping for.
Offline

Tony Chen

  • Posts: 1
  • Joined: Mon Nov 13, 2017 10:42 pm

Re: 1080p to 1080i converter

PostMon Nov 13, 2017 10:48 pm

The two de-interlacers/converters I use at my church are

Datavideo DAC-70

Decimator Designs MD-HX

Both will take either HDMI/SDI in and de-interlace/scale to an SDI signal output of your choosing

But I guess it depends on your definition of "cheap"
Offline
User avatar

Xtreemtec

  • Posts: 1503
  • Joined: Wed Jan 02, 2013 11:48 am
  • Location: The Netherlands

Re: 1080p to 1080i converter

PostTue Nov 14, 2017 12:24 pm

Andrew Martin wrote:No too late for that, it'll never happen... The TVS is already superceded by the TVS HD and I can't see BMD devoting time and resources to it for quite a serious update as you are hoping for.

The old TVS is not even capable of running 1080P. The whole architecture is not build for that. So no it will not happen.

And in the new Atems it won't happen either for mixed signals as part of how the internals are set up for the Atem.
In the roland every source runs first trough a scaler before they getting processed. And then again rescaled for output.. Think about what this does to your signal when getting scaled twice ;)
Daniel Wittenaar .:: Xtreemtec Media Productions ::. -= www.xtreemtec.nl =-
4K OBV, ATEM TVS HD, Production Studio 4K, 2M/E Broadcast Studio 4K, Hyperdeck Studio, SONY FS7 4K, JVC HM700 Full HD Camera
Offline

JayHoegle

  • Posts: 1
  • Joined: Tue Nov 14, 2017 10:38 pm
  • Location: Key West Florida

Re: 1080p to 1080i converter

PostTue Nov 14, 2017 10:41 pm

We use decimator MD-HX to go from 1080P to 1080i and back again because our entire system is 1080P and our ultra nexus HD is 1080i... so frustrating.
these work well.

Return to Live Production

Who is online

Users browsing this forum: No registered users and 9 guests