- Posts: 10
- Joined: Mon Aug 21, 2017 2:11 pm
Hello Robert. You are correct that it is not necessary to use the Talkback Converter if you wire it the way you mentioned. The SDI DA will handle all CCU and Tally information for the cameras. You do not need to send reference to the cameras as you should set them to "Program Input" using the ATEM as a reference. In the Camera menu be sure to set the Line Timing to -5 or max negative to insure the camera timing hits the ATEM ahead of the ATEM timing. This will insure minimum latency in the system.
Hope this helps.
Regards, Gary