Tally lights for Atem television studio pro hd?

I have an Atem television studio pro hd with 3 camcorders using HDMI.

I need a Tally light to tell me what camera to look at when live.
What tally system works with the "Atem television studio pro hd"?

What are you using or what do you recommend?
I do not care if it is wired or wireless. Looking at the most inexpensive solution.

Thank you for your time.

I've been using Cuebi.com lights for some time now, they work very well with bright preview/program leds mounted on the hot shoe of the camera. They work via wifi that is connected to the ATEM and are powered over usb from my camera's.

Visit http://www.tally-lights.com/products/controllers

If you have a technican or you are yourself one, you can build a very cheep tally. For this use an arduino with relais (or more expensive, but ready to use a BM tally box) , some resitors, LEDs and some cables. Instead of LEDs, you also can buy the Datavideo lamps TD-3, a set of 4 for approx €80,-.

If you want a ready to go solution, take a look on the wireless tally system „FlexiTally“. A user in the german ATEM user group at facebook uses it without any issues.

I've been using Cuebi.com lights for some time now, they work very well with bright preview/program leds mounted on the hot shoe of the camera. They work via wifi that is connected to the ATEM and are powered over usb from my camera's.

I just recently purchased the Cuebi tally lights and I’m having issues with the atem recognizing the devices. I have configured the access point and the cuebis are blinking purple waiting for the atem software to be recognized. Do you have any suggestions on how to get the software to recognize the devices? Was your set up relatively easy?

Hi released one on a PI, that works pretty well

https://visionswitcher.com/forum/viewtopic.php?f=15&t=2