XLR Audio Level Control in Atem TVS Pro 4K

Questions about ATEM Switchers, Camera Converter and everything live!
  • Author
  • Message
Offline

gunjanvasant

  • Posts: 3
  • Joined: Fri Jul 06, 2018 12:40 pm
  • Real Name: Gunjan Vasant

XLR Audio Level Control in Atem TVS Pro 4K

PostTue Jul 10, 2018 11:41 am

Hello All
Just purchased the Atem TVS Pro 4K.
I need to take the audio source from an external source through the XLR inputs of the switcher. Is there a way to control the input levels from the switcher panel, if I don't want to connect the laptop or an external audio mixer??
Offline

Gary Adams

Blackmagic Design

  • Posts: 624
  • Joined: Sat Aug 25, 2012 6:14 am

Re: XLR Audio Level Control in Atem TVS Pro 4K

PostTue Jul 10, 2018 10:29 pm

Hello Gunjan. The external audio level may be controlled in the Audio Mixer menu on the panel. When the menu is in the Home position, the control becomes the master level.

Regards, Gary
Gary Adams
Blackmagic Design
Offline

gunjanvasant

  • Posts: 3
  • Joined: Fri Jul 06, 2018 12:40 pm
  • Real Name: Gunjan Vasant

Re: XLR Audio Level Control in Atem TVS Pro 4K

PostWed Jul 11, 2018 9:49 am

Thanks Gary.
Unfortunately, I could not find the audio mixer menu on the panel. Went through all menus, but no luck!!
Offline

gunjanvasant

  • Posts: 3
  • Joined: Fri Jul 06, 2018 12:40 pm
  • Real Name: Gunjan Vasant

Re: XLR Audio Level Control in Atem TVS Pro 4K

PostSun Jul 15, 2018 9:53 am

Thanks a lot Gary, and sorry for the silence at my end as I was away on a shoot.
Yes, finally it has happened. Actually the Switcher panel s/w was not updated.
Now that I have installed all software on my laptop, as well as updated the panel, I can see the Audio mixer settings.
Thanks again.
Cheers

Return to Live Production

Who is online

Users browsing this forum: Tobias Dieterich and 10 guests