Thu Aug 09, 2018 12:17 am
I believe both the Panasonic AG-AC90 and AG-UX90 are region-specific cameras, which means they are probably fixed to either PAL (50Hz) or NTSC (60Hz) frame rates.
If I'm not mistaken the Philippines is an NTSC country, so you should probably be using NTSC frame rates (60Hz). Hopefully, both of your cameras are 60Hz models, if you somehow ended up with a 50Hz camera, you would need some kind of frame rate converter to get them both to work with the ATEM.
If both cameras are the 60Hz version, then you just need to make sure that they are both set to output the same resolution and frame rate, and also set the ATEM switcher to this resolution and frame rate. On most cameras there is both an internal recording format and a video output format (HDMI output) that need to be set appropriately.
If you want to use 1080i5994 on the ATEM switcher, then on the AC90 you would set the REC FORMAT to 60i and the OTHER FUNCTION -> HDMI RESOLUTION to 1080i. Note that even though the menu lists this as 60i, I believe it is actually 1080i5994.
On the UX90, you would set the SYSTEM MODE -> REC FORMAT to FHD 1080/59.94i (assuming the REC MODE is MOV or MP4). Then you would set the OUTPUT SETUP -> RESOLUTION to 1080i.