Axis M3045-V cameras

Questions about ATEM Switchers, Camera Converter and everything live!
  • Author
  • Message
Offline

kivens

  • Posts: 2
  • Joined: Thu Aug 16, 2018 4:58 pm
  • Real Name: Ken Ivens

Axis M3045-V cameras

PostThu Aug 16, 2018 5:13 pm

Hardware: ATEM Television Studio Pro HD and AXIS M3045-V cameras

I have an AXIS M3045-V camera connected to the HDMI port 1 on my Studio Pro HD.
Shows CAM1 as 'On Air' but no signal getting through.
The camera's frame rate is set to 30 and the ATEM is set to 1080p59.94.

I have ordered the HDMI to SDI converter and a 4.5G SDI cable today.
I suspect that the converter may clean up the mismatch on the frame rate.

Am I on the right track to sorting this out?

thanks,
...ken
Offline

Denny Smith

  • Posts: 13131
  • Joined: Thu Aug 01, 2013 4:19 pm
  • Location: USA, Northern Calif.

Re: Axis M3045-V cameras

PostThu Aug 16, 2018 6:20 pm

Nope, the camera resolution setting and the ATEM must match. If yiu can not set the AXIS to 1080p59.94, you need the new Up/Down/Cross HD Mini Converter, in addition to a HDMI to SDI Converter, if you need more than 12-feet of cable between the camera and switcher, 12-feet is the max HDMI cable run that will work with the ATEM.
Cheers
Denny Smith
SHA Productions
Offline
User avatar

Xtreemtec

  • Posts: 5391
  • Joined: Wed Jan 02, 2013 11:48 am
  • Location: The Netherlands

Re: Axis M3045-V cameras

PostThu Aug 16, 2018 6:35 pm

Daniel Wittenaar .:: Xtreemtec Media Productions ::. -= www.xtreemtec.nl =-
4K OBV Trailer, ATEM TVS HD, 4M/E Broadcast Studio 4K, Constelation 8K, Hyperdeck Studio 12G, Ursa Broadcast 4K, 4K fiber converters with Sony Control
Offline

kivens

  • Posts: 2
  • Joined: Thu Aug 16, 2018 4:58 pm
  • Real Name: Ken Ivens

Re: Axis M3045-V cameras

PostThu Aug 16, 2018 8:27 pm

Thanks for both quick responses.
I have some reading to do I see.

Return to Live Production

Who is online

Users browsing this forum: No registered users and 66 guests