- Posts: 3
- Joined: Tue Jun 28, 2016 8:04 pm
Hi All.
I'm fairly new to ATEM stuff and have scoured the FAQ section and other posts and still need a little guidance.
I'm trying to connect 3 SJCam 4000 action cams via HDMI to my ATEM. The mini hdmi output shows up if I plug straight into a monitor of TV. They have also worked fine in the past when using a Roland V1-HD. I understand from my searching that they may not output enough voltage to show up as a source. I fed one through a HDMI/CAT 5 range extender to boost the output but still no luck. I also attached my PC via HDMI to adjust the output/frame rate etc and that didn't show up either. I have no SDI source to check that any of those work. I believe it may be a frame rate/video output issue.
Questions;
If I used a HDMI-SDI converter would that allow me to match video output to that of the ATEM?
What could be the issue stopping the desktop display showing up?
With everything connected and running the control software, I only see "Blackmagic SDI" in the input mapping screen, no option to change to HDMI shows up. Am I missing something?
All help gratefully received (and yes I know the SJcams are cheap thats why I bought them not the gopros! )
I'm fairly new to ATEM stuff and have scoured the FAQ section and other posts and still need a little guidance.
I'm trying to connect 3 SJCam 4000 action cams via HDMI to my ATEM. The mini hdmi output shows up if I plug straight into a monitor of TV. They have also worked fine in the past when using a Roland V1-HD. I understand from my searching that they may not output enough voltage to show up as a source. I fed one through a HDMI/CAT 5 range extender to boost the output but still no luck. I also attached my PC via HDMI to adjust the output/frame rate etc and that didn't show up either. I have no SDI source to check that any of those work. I believe it may be a frame rate/video output issue.
Questions;
If I used a HDMI-SDI converter would that allow me to match video output to that of the ATEM?
What could be the issue stopping the desktop display showing up?
With everything connected and running the control software, I only see "Blackmagic SDI" in the input mapping screen, no option to change to HDMI shows up. Am I missing something?
All help gratefully received (and yes I know the SJcams are cheap thats why I bought them not the gopros! )