Product(s) Recommendation

Questions about ATEM Switchers, Camera Converter and everything live!
  • Author
  • Message
Offline

kahhar

  • Posts: 1
  • Joined: Mon Jan 07, 2019 7:04 pm
  • Real Name: Cort Wenzel

Product(s) Recommendation

PostMon Jan 07, 2019 7:09 pm

Hello,

I am looking for a solution to the following:
1. An HDMI splitter in the form of 1x HDMI In to 2x HDMI Out
2. An HDMI converter in the form of 1x HDMI to 1x Composite video (in RCA) (I don't need the audio for this conversion; none of the sources are HDCP)

Is this possible to achieve with Blackmagic's converters? If so, which product(s) and which cable(s)?
Offline

Sander Vreuls

  • Posts: 85
  • Joined: Fri Mar 22, 2013 5:09 pm

Re: Product(s) Recommendation

PostTue Jan 08, 2019 7:52 am

To do this with Blackmagic products would use up a lot of converters.. I would look at different solutions, perhaps Chinese made converters..

BM mostly deal in SDI variants with HDMI being something you convert to and from.. They do SDI to analog but going from HDMI to SDI and then SDI to analog seems like a waste..
Offline

Chris Murch

  • Posts: 25
  • Joined: Wed Feb 14, 2018 4:51 pm
  • Location: Adelaide, Australia
  • Real Name: Chris Murch

Re: Product(s) Recommendation

PostWed Jan 09, 2019 9:43 am

You can, but it will be expensive.

I use a HDMI to Composite from a local company called Jaycar in Australia.

I use a HDMI splitter from Ebay to convert from 1 to 2 HDMI outputs.

https://www.jaycar.com.au/composite-av-to-hdmi-converter/p/AC1722

https://www.jaycar.com.au/hdmi-to-av-composite-converter/p/AC1720

Hope it helps

Return to Live Production

Who is online

Users browsing this forum: No registered users and 11 guests