HDMI Recorder for live shows

Questions about ATEM Switchers, Camera Converter and everything live!
  • Author
  • Message
Offline

Mark Whiteman

  • Posts: 2
  • Joined: Tue Apr 02, 2019 11:33 am
  • Real Name: Mark Whiteman

HDMI Recorder for live shows

PostTue Apr 02, 2019 11:47 am

Hi.

I'm in the process of setting up a small music streaming venue. I have 4 cameras going into a Roland V1HD mixer then out from there to a capture card and laptop.

I would like to record what's being streamed. I was thinking of doing it hardware based rather than pc.

Would the Video Assist work in line between the Roland and the capture card? The V1HD output is 1080 50p. Or is there an alternative, don't really need a screen on it as there is one hooked up to the video mixer.
Offline
User avatar

Xtreemtec

  • Posts: 5455
  • Joined: Wed Jan 02, 2013 11:48 am
  • Location: The Netherlands

Re: HDMI Recorder for live shows

PostTue Apr 02, 2019 4:21 pm

Video assist will work, A hyperdeck will work.
Daniel Wittenaar .:: Xtreemtec Multicam Facilities ::. -= www.xtreemtec.nl =-
4K OBV Truck, Dual ATEM 8K, 120x120 Videohub, 12x Hyperdeck 4K Pro, Ursa Broadcast 4K G2, 4K fiber converters with Sony Control and seperate Tally on SMPTE
Offline

Mark Whiteman

  • Posts: 2
  • Joined: Tue Apr 02, 2019 11:33 am
  • Real Name: Mark Whiteman

Re: HDMI Recorder for live shows

PostTue Apr 02, 2019 6:54 pm

Thanks for the reply.

Is the HDMI out on the Video Assist a straight pass thru? Or would I need a HDMI splitter?

I'm new to video recording, audio I've been doing for years.
Offline
User avatar

Xtreemtec

  • Posts: 5455
  • Joined: Wed Jan 02, 2013 11:48 am
  • Location: The Netherlands

Re: HDMI Recorder for live shows

PostWed Apr 03, 2019 8:49 am

It will pass the HDMI yes. Until you hit the play button. Then it becomes an output of the recorder. ;)
Daniel Wittenaar .:: Xtreemtec Multicam Facilities ::. -= www.xtreemtec.nl =-
4K OBV Truck, Dual ATEM 8K, 120x120 Videohub, 12x Hyperdeck 4K Pro, Ursa Broadcast 4K G2, 4K fiber converters with Sony Control and seperate Tally on SMPTE
Offline

Brentthebigdog

  • Posts: 1
  • Joined: Fri Feb 14, 2020 5:00 am
  • Real Name: Brent Bailey

Re: HDMI Recorder for live shows

PostFri Feb 14, 2020 5:07 am

I have a Roland V-1HD with 4 JVC GY-HM170 4KCAMs set to HDMI Output 1080i to the roland, then from the Roland, which is set to 1080i and frame rate of 59.94, to a Black Magic Micro Convertor HDMI-SDI and from there to the Black Magic Hyperdeck Mini. I cannot get signal to the deck, no matter how many times I hit record. Any ideas where my break down is?
Offline
User avatar

Xtreemtec

  • Posts: 5455
  • Joined: Wed Jan 02, 2013 11:48 am
  • Location: The Netherlands

Re: HDMI Recorder for live shows

PostSat Feb 15, 2020 1:47 pm

Guess you have HDCP mode enabled in the Roland V1. Then your HDMI > SDI converter will not do anything.

Turn off HDCP in the roland and it will work. ;)
Daniel Wittenaar .:: Xtreemtec Multicam Facilities ::. -= www.xtreemtec.nl =-
4K OBV Truck, Dual ATEM 8K, 120x120 Videohub, 12x Hyperdeck 4K Pro, Ursa Broadcast 4K G2, 4K fiber converters with Sony Control and seperate Tally on SMPTE

Return to Live Production

Who is online

Users browsing this forum: No registered users and 23 guests