Cleanswitch question

Questions about ATEM Switchers, Camera Converter and everything live!
  • Author
  • Message
Offline

philipc3

  • Posts: 2
  • Joined: Sun Apr 21, 2019 12:25 pm
  • Real Name: Philip van Til

Cleanswitch question

PostMon Apr 22, 2019 8:06 pm

Hi,

I've got a questions whether or not the cleanswitch will work like I think it will work for the following setup. I cannot find to much info about it online.

I want the following setup: 2 sources (pc and a camera) connected to a cleanswitch and a beamer as output. I want to switch between the sources glitch free.

Will using the cleanswitch cause the switch to be glitch free on a beamer? And if it does I assume a beamer can only do that when both sources have the same resolution/frame rate? Or?

Thanks in advance. Philip
Offline

philipc3

  • Posts: 2
  • Joined: Sun Apr 21, 2019 12:25 pm
  • Real Name: Philip van Til

Re: Cleanswitch question

PostWed May 01, 2019 5:22 am

Anyone?
Offline

Nick Lavigne

  • Posts: 172
  • Joined: Thu Oct 04, 2018 5:36 am
  • Location: Connecticut, USA
  • Real Name: Nick Lavigne

Re: Cleanswitch question

PostWed May 01, 2019 11:52 pm

You would need to have both inputs be the same resolution and frame rate, otherwise your projector will be constantly changing resolutions which would be very very noticeable, just like when your TV has to change resolution. Once that is all set you should be good on the cleanswitch model.
Also the router only has SDI so you will need HDMI to SDI converters.
Offline
User avatar

Xtreemtec

  • Posts: 5391
  • Joined: Wed Jan 02, 2013 11:48 am
  • Location: The Netherlands

Re: Cleanswitch question

PostThu May 02, 2019 10:10 am

And the cleanswitch only works IF sources are same resolution and framerate!! ;)

Also be sure you have a very stable signal on input 1 of the cleanswitch else your cleanswitch will go haywire and out of sync.
Daniel Wittenaar .:: Xtreemtec Media Productions ::. -= www.xtreemtec.nl =-
4K OBV Trailer, ATEM TVS HD, 4M/E Broadcast Studio 4K, Constelation 8K, Hyperdeck Studio 12G, Ursa Broadcast 4K, 4K fiber converters with Sony Control
Offline

rogersuski

  • Posts: 237
  • Joined: Wed Aug 29, 2012 12:37 am

Re: Cleanswitch question

PostFri May 03, 2019 9:32 pm

I think you would be better served with a presentation switcher/scaler for your use case.

Kramer VP line or the Extron IN line

Return to Live Production

Who is online

Users browsing this forum: No registered users and 40 guests