Unusable after "Upgrading" to Windows 10 Pro

Get answers to your questions about color grading, editing and finishing with DaVinci Resolve.
  • Author
  • Message
Offline

Brad Smith

  • Posts: 4
  • Joined: Wed Sep 02, 2015 6:07 pm

Unusable after "Upgrading" to Windows 10 Pro

PostTue Jul 26, 2016 3:03 am

I've been holding out in upgrading to windows 10 as long as I could but did so today. And now, Resolve 12.5 is not even usable. Its beyond slow to do anything including opening/creating a project.

Setup
4700K i7
32gb Ram
GTX 970
4 Samsung 850 Evos

I'm hoping it something simple....Yes, i've rebooted, i've search and found a couple of things to try and nothing worked so far. Any help is appreciated! If you need more information, no problem.
Offline
User avatar

Craig Marshall

  • Posts: 949
  • Joined: Sun Apr 07, 2013 4:49 am
  • Location: Blue Mountains, Australia

Re: Unusable after "Upgrading" to Windows 10 Pro

PostTue Jul 26, 2016 4:00 am

I have almost identical hardware and 12.5 works perfectly on win 10 64bit. I'm not able to offer any specific suggestions except for checking the obvious.
4K Post Studio, Freelance Filmmaker, Media Writer
Win10/Lightworks/Resolve 15.1/X-Keys 68 Jog-Shuttle/OxygenTec ProPanel
12G SDI Decklink 4K Pro/Calibrated 10bit IPS SDI Monitor
HDvideo4K.com
Offline

William Eguienta

  • Posts: 138
  • Joined: Tue Sep 30, 2014 5:53 pm
  • Location: Montpellier, France

Re: Unusable after "Upgrading" to Windows 10 Pro

PostTue Jul 26, 2016 5:51 am

Do a clean install of windows then resolve. I had the same problem and it worked well


www.kaiz3r.net
Offline

Adam Simmons

  • Posts: 5510
  • Joined: Thu Apr 04, 2013 4:21 pm
  • Location: UK

Re: Unusable after "Upgrading" to Windows 10 Pro

PostTue Jul 26, 2016 6:58 am

After the upgrade did you then go back and install drivers for everything? The ones that Win 10 puts in are not usually very good so you should always re-install the motherboard drivers and any drivers for graphics cards etc
DVC Built Clevo P775DM3-G Laptop with UHD screen, 7700K CPU@4.9Ghz, Geforce GTX 1060 6GB GPU, G-Sync UHD screen, 500GB M.2 Primary, 1x 480GB SSD, 1x1TB M.2, 1x 2TB Video drives.
Building Bespoke Video Editing systems for over 16 years
Offline
User avatar

ClarkSeverson

  • Posts: 67
  • Joined: Wed Sep 11, 2013 9:43 pm
  • Location: Costa Mesa, CA

Re: Unusable after "Upgrading" to Windows 10 Pro

PostTue Jul 26, 2016 2:47 pm

+1 Clean Install

I upgraded and it worked, but after doing a clean install I was amazed at how much faster DR ran.
Studio 18.5.1, MacOS 13.5.1
2023 Mac Studio M2 Ultra
60 Core/128 GB RAM
Offline

John Paines

  • Posts: 5787
  • Joined: Tue Jul 28, 2015 4:04 pm

Re: Unusable after "Upgrading" to Windows 10 Pro

PostTue Jul 26, 2016 3:19 pm

ClarkSeverson wrote:+1 Clean Install

I upgraded and it worked, but after doing a clean install I was amazed at how much faster DR ran.


Upgraded from what OS? And faster in what respect? Thanks.
Offline

Ti Duffield

  • Posts: 3
  • Joined: Sat Jul 23, 2016 1:04 pm
  • Location: London, UK

Re: Unusable after "Upgrading" to Windows 10 Pro

PostTue Jul 26, 2016 7:38 pm

The question about coming from which OS is pretty important. For instance, if you came from a 32bit version, without a clean install, there will be a number of old drivers to update. You could easily run into problems with that.

Upgrading often is also a good time to do some housecleaning anyway. And a few runs with something like CCleaner (to remove old registry entries) and some restarts, updating of drivers and repeated cleans can solve a number of problems.

If you did that weird online Win7/8 to Win10 "hot" upgrade, that's also a bit of a roll of the dice. It worked for me... kind of... but it was never completely stable. So when I built a new system, I started fresh.

There are so many reasons for poor performance after a major change, it's really difficult to point someone in a specific direction, but one place to start would be "How is everything else running after the upgrade?" If other programmes are running poorly, you can start to look into main system drivers, peripheral drivers, that kind of thing. The list, unfortunately, goes on and on.
Offline
User avatar

Leslie Wand

  • Posts: 721
  • Joined: Wed Jul 24, 2013 5:56 am
  • Location: rural nsw, australia

Re: Unusable after "Upgrading" to Windows 10 Pro

PostTue Jul 26, 2016 11:48 pm

+1 clean install.

really doesn't matter what you're coming from, in place upgrades generally work for 'most' common situations, but i've found that doing so for ANY nle software can prove fraught with weird side affects and really not worth the time and trouble sorting out.

if you want to take advantage of the free upgrade simply do an insitu install - thereafter you can do a clean install.
www.lesliewand.com.au
amd5 5800x / 32gb ram / rtx 3050 8gb / win 10 pro
sony ex3, sony a6400
Offline

John Paines

  • Posts: 5787
  • Joined: Tue Jul 28, 2015 4:04 pm

Re: Unusable after "Upgrading" to Windows 10 Pro

PostWed Jul 27, 2016 2:23 am

It's not clear whether this user saw a performance jump after upgrading from a prior OS to 10, or whether the system dragged on the initial W10 upgrade, and required a clean install to restore the original speed.

*That's* the question -- mine, anyway.
Offline
User avatar

ClarkSeverson

  • Posts: 67
  • Joined: Wed Sep 11, 2013 9:43 pm
  • Location: Costa Mesa, CA

Re: Unusable after "Upgrading" to Windows 10 Pro

PostWed Jul 27, 2016 2:56 pm

Upgraded from what OS? And faster in what respect? Thanks.[/quote]

I was on Win7 64-bit. My renders were approximately 25% faster. There was a "sluggishness" to the system on the upgrade but it was "snappy" on the clean install. It didn't just affect Resolve, I also noticed an improvement in my Adobe Creative Cloud apps.
Studio 18.5.1, MacOS 13.5.1
2023 Mac Studio M2 Ultra
60 Core/128 GB RAM
Offline

John Paines

  • Posts: 5787
  • Joined: Tue Jul 28, 2015 4:04 pm

Re: Unusable after "Upgrading" to Windows 10 Pro

PostWed Jul 27, 2016 2:57 pm

I'm sorry, I still don't follow. Is Resolve faster on W10 than W7?
Offline
User avatar

ClarkSeverson

  • Posts: 67
  • Joined: Wed Sep 11, 2013 9:43 pm
  • Location: Costa Mesa, CA

Re: Unusable after "Upgrading" to Windows 10 Pro

PostWed Jul 27, 2016 2:59 pm

John Paines wrote:It's not clear whether this user saw a performance jump after upgrading from a prior OS to 10, or whether the system dragged on the initial W10 upgrade, and required a clean install to restore the original speed.

*That's* the question -- mine, anyway.


I thought the system was very similar after the W10 upgrade, but the clean install gave me much better performance. Hope that helps.
Studio 18.5.1, MacOS 13.5.1
2023 Mac Studio M2 Ultra
60 Core/128 GB RAM
Offline
User avatar

ClarkSeverson

  • Posts: 67
  • Joined: Wed Sep 11, 2013 9:43 pm
  • Location: Costa Mesa, CA

Re: Unusable after "Upgrading" to Windows 10 Pro

PostWed Jul 27, 2016 3:00 pm

John Paines wrote:I'm sorry, I still don't follow. Is Resolve faster on W10 than W7?


My bad. Definitely faster on W10 for me with no changes to hardware.
Studio 18.5.1, MacOS 13.5.1
2023 Mac Studio M2 Ultra
60 Core/128 GB RAM
Offline

John Paines

  • Posts: 5787
  • Joined: Tue Jul 28, 2015 4:04 pm

Re: Unusable after "Upgrading" to Windows 10 Pro

PostWed Jul 27, 2016 3:03 pm

Can anyone else confirm this observed improvement?

Unfortunately, in any given case, it could have other causes: the state of your Win7 installation, settings, etc.
Offline
User avatar

ClarkSeverson

  • Posts: 67
  • Joined: Wed Sep 11, 2013 9:43 pm
  • Location: Costa Mesa, CA

Re: Unusable after "Upgrading" to Windows 10 Pro

PostWed Jul 27, 2016 3:05 pm

John Paines wrote:Can anyone else confirm this observed improvement?

Unfortunately, in any given case, it could have other causes: the state of your Win7 installation, settings, etc.


Good point on the Win7 settings. Did you try a clean install?
Studio 18.5.1, MacOS 13.5.1
2023 Mac Studio M2 Ultra
60 Core/128 GB RAM
Offline

John Paines

  • Posts: 5787
  • Joined: Tue Jul 28, 2015 4:04 pm

Re: Unusable after "Upgrading" to Windows 10 Pro

PostWed Jul 27, 2016 3:12 pm

I haven't noticed any degradation in Resolve over time -- beyond the increased demands since 12.x -- so the issue for me is whether an upgrade to 10 would buy me better performance than is possible under win7, generally, all else being equal.

From other reports, it looks like gaming performance is actually a bit slower on Win10, but that's not a great measure for Resolve.... Short of testing a clean install of Win10 --just the thought fills me with dread -- there's no way to know for sure, unless BMD reports on the matter or the results come in greater numbers.
Offline
User avatar

Jean Claude

  • Posts: 2973
  • Joined: Sun Jun 28, 2015 4:41 pm
  • Location: France

Re: Unusable after "Upgrading" to Windows 10 Pro

PostWed Jul 27, 2016 5:01 pm

Hi,

I did the upgrade free of W8.1 to W10 in 2015 and from the beginning I found that in most cases, the PC was more responsive but I have not made no benchmark.

After a year, I bought a license W10 Pro x64 and I did a clean install. Since I find that the system is very stable and runs a little faster but once you have installed all specific drivers W10 for my equipment. It's satisfying for waiting for a new PC soon.

Anyway, do a clean install can only do good to his PC, just to clean the registry. :)
"Saying it is good, but doing it is better! "
Win10-1809 | Resolve Studio V16.1 | Fusion Studio V16.1 | Decklink 4K Extreme 6G | RTX 2080Ti 431.86 NSD driver! |
Offline

Adam Simmons

  • Posts: 5510
  • Joined: Thu Apr 04, 2013 4:21 pm
  • Location: UK

Re: Unusable after "Upgrading" to Windows 10 Pro

PostWed Jul 27, 2016 5:42 pm

You do know you could have just installed the Win 10 Pro and entered your Win 8.1 Pro number
DVC Built Clevo P775DM3-G Laptop with UHD screen, 7700K CPU@4.9Ghz, Geforce GTX 1060 6GB GPU, G-Sync UHD screen, 500GB M.2 Primary, 1x 480GB SSD, 1x1TB M.2, 1x 2TB Video drives.
Building Bespoke Video Editing systems for over 16 years
Offline
User avatar

Jean Claude

  • Posts: 2973
  • Joined: Sun Jun 28, 2015 4:41 pm
  • Location: France

Re: Unusable after "Upgrading" to Windows 10 Pro

PostWed Jul 27, 2016 5:49 pm

Hi Adam,

Yes, i know of course, but as I will soon change materials, I know I need a personal license W10 X64 PRO. Currently it is based on the MAC adress and I will changed. So... :?
"Saying it is good, but doing it is better! "
Win10-1809 | Resolve Studio V16.1 | Fusion Studio V16.1 | Decklink 4K Extreme 6G | RTX 2080Ti 431.86 NSD driver! |
Offline

Adam Simmons

  • Posts: 5510
  • Joined: Thu Apr 04, 2013 4:21 pm
  • Location: UK

Re: Unusable after "Upgrading" to Windows 10 Pro

PostWed Jul 27, 2016 7:06 pm

Not just the MAC address. I changed my motherboard and Windows stayed activated
DVC Built Clevo P775DM3-G Laptop with UHD screen, 7700K CPU@4.9Ghz, Geforce GTX 1060 6GB GPU, G-Sync UHD screen, 500GB M.2 Primary, 1x 480GB SSD, 1x1TB M.2, 1x 2TB Video drives.
Building Bespoke Video Editing systems for over 16 years
Offline
User avatar

Craig Marshall

  • Posts: 949
  • Joined: Sun Apr 07, 2013 4:49 am
  • Location: Blue Mountains, Australia

Re: Unusable after "Upgrading" to Windows 10 Pro

PostWed Jul 27, 2016 8:14 pm

I'm on Win 10 Home Premium 64bit. Is there any real measurable performance advantage to Win 10 Pro 64bit? From the specs, it just looks like you get additional Enterprise style tools...
4K Post Studio, Freelance Filmmaker, Media Writer
Win10/Lightworks/Resolve 15.1/X-Keys 68 Jog-Shuttle/OxygenTec ProPanel
12G SDI Decklink 4K Pro/Calibrated 10bit IPS SDI Monitor
HDvideo4K.com
Offline
User avatar

Jean Claude

  • Posts: 2973
  • Joined: Sun Jun 28, 2015 4:41 pm
  • Location: France

Re: Unusable after "Upgrading" to Windows 10 Pro

PostThu Jul 28, 2016 4:20 pm

Interesting to know that it is not only the MAC address. I'll revise my sources. Now as I have already purchased a license to be quiet, even after July 29, when the update will not be free w10: to follow.

Win 10 Home Premium 64bit VS Pro 64bit Win 10?
Not sure but apart from the amount of memory and virtualization, I don't see other real advantage.
Someone better?
"Saying it is good, but doing it is better! "
Win10-1809 | Resolve Studio V16.1 | Fusion Studio V16.1 | Decklink 4K Extreme 6G | RTX 2080Ti 431.86 NSD driver! |

Return to DaVinci Resolve

Who is online

Users browsing this forum: Baidu [Spider], Bing [Bot], Breeze Tray, creycheek, Daniele96, Ed_Mantle, Mads Johansen and 199 guests