Remote Update:
Hello Forum, I just played around with my new Taranis...
So first i connected my receiver to the remote (previous posting)
Then I started to add different funcions to different buttons and triggers:
Iris:
I set the iris to Ch1 on my remote and assigned it to the left joystick. (Value -100 to 100 works)
Focus:
I set the focus to Ch2 and to the S2 potentiometer (same as iris, it works with the value -100 to 100)
Gain:
I set the gain to Ch4 and to the S1 poti. For this i set the values down to 0 to 10 as it seems that the value changes on 5. Additional to that I made a so called "Special Function" on the remote where i override the value of Ch4 when pressing down the left "SE" trigger. (override value to 1)
Shutter:
I set the shutter to Ch5 and assigned it to the right joystick L-R (Value Weight -2 and Offset 4)
Additional to the Joystick i also made a special function to override Ch5 with the value 6 when the trigger SH is pressed down.
WhiteB.:
I did the same with WB on Ch6
Additional to the Joystick i also made a special function to override Ch6 with the value 6 when the trigger SF is pressed up.
Hope I could help If you have any additional questions, let me know I try to help you out.
Greetings,
Christoph