- Posts: 148
- Joined: Wed Jul 09, 2014 4:24 pm
So I finally have all of the equipment I need to put this kit together. I may add more later but this is the start. I made a diagram showing how I think I can connect everything through the VideoHub.
This routing leaves me with 26 SDI input, 4 HDMI inputs (routed though Decimator MD-HX or MD-CROSS) and SDI output from the VIdeoHub. I did not add any routing for REF IN or OUT and no output connections for HDMI out of the equipment that has these type of connections.
Blue Lines are inputs to the VideoHub
Red Lines are outputs from the VIdeoHub
Yellow Lines are the 4 HDMI inputs mentioned above.
I bought a Teranex Mini SDI to HDMI to apply a LUT to the PGM output. Not sure if this will work well or not.
I may remove the MultiView from the ATEM from passing through the VideoHub and take it right to the SDI panel.
Let me know what you think and if you see something I am doing wrong or could do better.
This routing leaves me with 26 SDI input, 4 HDMI inputs (routed though Decimator MD-HX or MD-CROSS) and SDI output from the VIdeoHub. I did not add any routing for REF IN or OUT and no output connections for HDMI out of the equipment that has these type of connections.
Blue Lines are inputs to the VideoHub
Red Lines are outputs from the VIdeoHub
Yellow Lines are the 4 HDMI inputs mentioned above.
- Connection routing for switcher rack
- Swither Rack.png (778.61 KiB) Viewed 12042 times
I bought a Teranex Mini SDI to HDMI to apply a LUT to the PGM output. Not sure if this will work well or not.
I may remove the MultiView from the ATEM from passing through the VideoHub and take it right to the SDI panel.
Let me know what you think and if you see something I am doing wrong or could do better.
Last edited by Larry Masters on Fri Mar 10, 2017 12:59 am, edited 1 time in total.