Teranex SDI to HDMI LUTs and Signalling

Do you have questions about Desktop Video, Converters, Routers and Monitoring?
  • Author
  • Message
Offline

SimonThompson

  • Posts: 23
  • Joined: Fri Mar 01, 2013 11:26 am
  • Location: London, United Kingdom

Teranex SDI to HDMI LUTs and Signalling

PostThu Mar 16, 2017 4:22 pm

Hi,

A quick couple of questions about the Teranex SDI to HDMI 12G LUT capability:

  • Is it possible to apply the LUT to both the HDMI and SDI outputs?
  • Is it possible to correctly flag ITU-R BT.2100 video on the HDMI output?

Thanks
S
Simon Thompson

Broadcast R&D Engineer
London
Offline
User avatar

Scott Smith

  • Posts: 959
  • Joined: Sat Apr 13, 2013 12:51 pm

Re: Teranex SDI to HDMI LUTs and Signalling

PostMon Mar 20, 2017 4:34 pm

I don't know about your second question, but the first is no. That SDI output isn't really an output - it is a loop-through, and happens before any processing except re-clocking.
Scott R Smith
BMD Stuff I use: ATEM 2-M/E, 4 x ATEM PS 4K, Broadcast Videohub, 6 Hyperdeck Pros, 4 Hyperdeck Shuttles, Multidock, Smartscope Duo, Smartview, Intensity Extreme, Decklink Studio, and lots of Miniconverters and Open Gear Converters.
Offline
User avatar

Erik Wittbusch

  • Posts: 482
  • Joined: Sun Aug 16, 2015 8:06 pm
  • Location: Duisburg, Germany

Re: Teranex SDI to HDMI LUTs and Signalling

PostMon Mar 20, 2017 5:34 pm

Hi,

I'm sorry to say, but the SDI out can also have the LUT applied.
But it can only be the same LUT that's already applied to the HDMi out.

And it is HDMI 2.0 compatible, so it should do correctly flag BT.2100.
Offline
User avatar

Scott Smith

  • Posts: 959
  • Joined: Sat Apr 13, 2013 12:51 pm

Re: Teranex SDI to HDMI LUTs and Signalling

PostThu Mar 23, 2017 8:27 pm

Really?? I will check that out. I guess I stand corrected.
Scott R Smith
BMD Stuff I use: ATEM 2-M/E, 4 x ATEM PS 4K, Broadcast Videohub, 6 Hyperdeck Pros, 4 Hyperdeck Shuttles, Multidock, Smartscope Duo, Smartview, Intensity Extreme, Decklink Studio, and lots of Miniconverters and Open Gear Converters.
Offline

Adam Beason

  • Posts: 1
  • Joined: Sat Apr 01, 2017 8:20 pm

Re: Teranex SDI to HDMI LUTs and Signalling

PostSat Apr 01, 2017 8:24 pm

Is there any plan to add capability to apply a separate LUT to the loop out in a future firmware update? I'd buy one of these for each room we have if we could calibrate our reference monitors and screening monitors with one box.

Return to Post Production

Who is online

Users browsing this forum: No registered users and 38 guests