mini recorder with

Getting started with a Blackmagic product? Ask questions here about setup and installation.
  • Author
  • Message
Offline

Cedric Renouf

  • Posts: 8
  • Joined: Wed Dec 16, 2015 9:00 pm

mini recorder with

PostFri Jun 09, 2017 7:36 pm

Guys,

I have this used mini recorder that is not recognized by Desktop Video. Window 10 detects it, but shows a yellow alert/triangle thing with a message to the tune of "This device reported a problem so windows had to disable it".

When I powered up the first time, I had it installed next to another fully functional mini recorder, a prompt popped up asking me to update the Blackmagic drivers. As soon as I did that and rebooted, the same prompt popped up again ...and again...and again, every time I start the PC.

Any ideas if this card is salvageable or it has gone to greener pastures?

Image
Offline

Tony Rivera

Blackmagic Design

  • Posts: 3456
  • Joined: Mon Aug 12, 2013 4:52 pm
  • Real Name: Tony Rivera

Re: mini recorder with

PostFri Jun 09, 2017 9:27 pm

Try completely uninstalling the Desktop Video from the computer and then reinstall it.
Support: http://www.blackmagicdesign.com/support
Info: http://www.blackmagicdesign.com/company

Follow us on Instagram:
@blackmagicnewsofficial
Offline

Cedric Renouf

  • Posts: 8
  • Joined: Wed Dec 16, 2015 9:00 pm

Re: mini recorder with

PostSat Jun 10, 2017 6:32 am

Tony,

I did this quite a few a times. How likely is it to be a driver issue though, provided I have two other mini recorders that work fine. Would rolling back the driver make any sense?

Generally, when a card is faulty does it register with the device manager at all?

thanks!
Offline

Tony Rivera

Blackmagic Design

  • Posts: 3456
  • Joined: Mon Aug 12, 2013 4:52 pm
  • Real Name: Tony Rivera

Re: mini recorder with

PostMon Jun 12, 2017 11:18 pm

If you had mentioned you had other products of ours being recognized fine, the other suggestion I'd mention is swapping the card not being detected into one of the slots that has a card being recognized and see what the result is. It could be that one of the slots doesn't meet the requirements or possibly that card has stopped working and at that point, our guidance would be contacting your regions support office for the next steps.
Support: http://www.blackmagicdesign.com/support
Info: http://www.blackmagicdesign.com/company

Follow us on Instagram:
@blackmagicnewsofficial

Return to Getting Started

Who is online

Users browsing this forum: No registered users and 28 guests