Mini Converter HDMI to SDI Audio Problem

Questions about ATEM Switchers, Camera Converter and everything live!
  • Author
  • Message
Offline

Joe Blackledge

  • Posts: 1
  • Joined: Tue Oct 10, 2017 1:13 pm

Mini Converter HDMI to SDI Audio Problem

PostTue Oct 10, 2017 1:49 pm

Sending Video/Audio to nursery from sanctuary. Wanting to embed an audio feed from the sound board. Cannot get sound to work directly into the converter. If I connect the audio to the camera it will feed through perfectly. So, I know my audio feed is working. I cannot use this camera for this purpose permanently. I will have to buy a less expensive camera.

I have switch 8 set to analog. I am moving switch 7 back and forth depending on whether or not I'm sending from the camera or directly from the board.
Offline
User avatar

Xtreemtec

  • Posts: 5397
  • Joined: Wed Jan 02, 2013 11:48 am
  • Location: The Netherlands

Re: Mini Converter HDMI to SDI Audio Problem

PostTue Oct 10, 2017 6:43 pm

Be sure to have the latest firmware in it. And connect the software and check if the the audio levels are up.. If they are almost muted like this image you will not have any decent audio ;)

Also check your audio leads.. Did you wire the TRS connectors correct? See page 7 of the manual http://documents.blackmagicdesign.com/C ... Manual.pdf
Attachments
audiolevel.jpg
audiolevel.jpg (145.94 KiB) Viewed 1477 times
Daniel Wittenaar .:: Xtreemtec Media Productions ::. -= www.xtreemtec.nl =-
4K OBV Trailer, ATEM TVS HD, 4M/E Broadcast Studio 4K, Constelation 8K, Hyperdeck Studio 12G, Ursa Broadcast 4K, 4K fiber converters with Sony Control

Return to Live Production

Who is online

Users browsing this forum: No registered users and 46 guests